Drilling Performance of Natural Fiber Reinforced Polymer Composites: A Review

References

• Abilash, N., and M. Sivapragash. 2016. Optimizing the delamination failure in bamboo fiber reinforced polyester composite. Journal of King Saud University-Engineering Sciences 28 (1):92–102. doi:10.1016/j.jksues.2013.09.004.
   Google Scholar
• Alagappan, K. M., S. Vijayaraghavan, M. P. Jenarthanan, and R. Giridharan. 2020. Optimization of process parameters on drilling of natural fibres reinforced in epoxy resin matrices using Taguchi-Grey relational analysis. Multidiscipline Modeling in Materials and Structures. doi:10.1108/mmms-06-2019-0108.
   Web of Science ®Google Scholar
• Aravindh, S., and K. Umanath. 2015. Delamination in drilling of natural fibre reinforced polymer composites produced by compression moulding. Applied Mechanics and Materials 766-767:796–800. d o i:1 0.4028/w w w.scientific.net/AMM.766-767.796.
   Google Scholar
• Arputhabalan, J., S. Prabhu, K. Palanikumar, S. Venkatesh, and K. Vijay. 2019. Assay of machining attributes in drilling of natural hybrid fiber reinforced polymer composite. Materials Today-Proceedings 16:1097–105. doi:10.1016/j.matpr.2019.05.201.
   Google Scholar
• Athijayamani, A., M. Thiruchitrambalam, U. Natarajan, and B. Pazhanivel. 2010. Influence of alkali-treated fibers on the mechanical properties and machinability of roselle and sisal fiber hybrid polyester composite. Polymer Composites 31 (4):723–31. doi:10.1002/pc.20853.
   Web of Science ®Google Scholar
• Azmi, A. I. 2013. Chip formation studies in machining fibre reinforced polymer composites. International Journal of Materials & Product Technology 46 (1):32–46. doi:10.1504/IJMPT.2013.052790.
   Web of Science ®Google Scholar
• Babu, D., K. Sivaji Babu, and B. Uma Maheswar Gowd. 2012. Drilling uni-directional fiber-reinforced plastics manufactured by hand lay-up influence of fibers. American Journal of Materials Science and Technology 1 (1):1–12. doi:10.7726/ajmst.2012.1001.
   Google Scholar
• Babu, G. D., K. Sivaji Babu, and B. Uma Maheswar Gowd. 2013b. Effect of machining parameters on milled natural fiber-reinforced plastic composites. J. Adv. Mech. Eng. 1: 1–12
   Google Scholar
• Babu, G. D., K. Sivaji Babu, and B. Gowd. 2013a. Optimization of machining parameters in drilling hemp fiber reinforced composites to maximize the tensile strength using design experiments. Indian Journal of Engineering and Materials Sciences (IJEMS) 20 (Oct–2013):385–90.
   Google Scholar
• Bajpai, P. K., and I. Singh. 2013. Drilling behavior of sisal fiber-reinforced polypropylene composite laminates. Journal of Reinforced Plastics and Composites 32 (20):1569–76. doi:10.1177/0731684413492866.
   Web of Science ®Google Scholar
• Bajpai, P. K., K. Debnath, and I. Singh. 2017. Hole making in natural fiber-reinforced polylactic acid laminates: An experimental investigation. Journal of Thermoplastic Composite Materials 30 (1):30–46. doi:10.1177/0892705715575094.
   Web of Science ®Google Scholar
• Balaji, N. S., S. Jayabal, and S. Kalyana Sundaram. 2016. A neural network based prediction modeling for machinability characteristics of zea fiber-polyester composites. Transactions of the Indian Institute of Metals 69 (4):881–89. doi:10.1007/s12666-015-0571-3.
   Web of Science ®Google Scholar
• Belaadi, A., H. Laouici, and M. Bourchak. 2020. Mechanical and drilling performance of short jute fibre-reinforced polymer biocomposites: Statistical approach. The International Journal of Advanced Manufacturing Technology 106 (5–6):1989–2006. doi:10.1007/s00170-019-04761-4.
   Web of Science ®Google Scholar
• Bismarck, A., S. Mishra, and T. Lampke. 2005. Plant fibers as reinforcement for green composites. In Natural Fibers, Bioploymers, and Biocomposites, 52-128, ed. A. K. Mohanty, M. Misra, and L. T. Drzal, 38. Boca Raton, FL: CRC Press.
   Google Scholar
• Carus, M. 2011. Bio-composites: Technologies, applications and markets. 4th International Conference on Sustainable Materials, Polymers and Composites, Birmingham, UK, 6–7 July 2011.
   Google Scholar
• Chaudhary, V., and P. P. Gohil. 2016. Investigations on drilling of bidirectional cotton polyester composite. Materials and Manufacturing Processes 31 (7):960–68. doi:10.1080/10426914.2015.1059444.
   Web of Science ®Google Scholar
• Chegdani, F., S. Mezghani, M. E. Mansori, and A. Mkaddem. 2015. Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics. Wear 332-333:772–79. doi:10.1016/j.wear.2014.12.039.
   Web of Science ®Google Scholar
• De Rosa, I. M., C. Santulli, and F. Sarasini. 2010. Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers. Materials & Design (1980-2015) 31 (5):2397–405. doi:10.1016/j.matdes.2009.11.059.
   Web of Science ®Google Scholar
• Debnath, K., I. Singh, and A. Dvivedi. 2014. Drilling characteristics of sisal fiber-reinforced epoxy and polypropylene composites. Materials and Manufacturing Processes 29 (11–12):1401–09. doi:10.1080/10426914.2014.941870.
   Web of Science ®Google Scholar
• Debnath, K., I. Singh, and A. Dvivedi. 2017. On the analysis of force during secondary processing of natural fiber-reinforced composite laminates. Polymer Composites 38 (1):164–74. doi:10.1002/pc.23572.
   Web of Science ®Google Scholar
• Debnath, K., M. Sisodia, A. Kumar, and I. Singh. 2016. Damage-free hole making in fiber-reinforced composites: an innovative tool design approach. Materials and Manufacturing Processes 31 (10):1400–08. doi:10.1080/10426914.2016.1140191.
   Web of Science ®Google Scholar
• Dhakal, H. N., S. O. Ismail, S. O. Ojo, M. Paggi, and J. R. Smith. 2018. Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: A comprehensive analysis of machining-induced damage responses. The International Journal of Advanced Manufacturing Technology 99 (9):2833–47. doi:10.1007/s00170-018-2670-x.
   Web of Science ®Google Scholar
• Díaz-Álvarez, A., J. Díaz-Álvarez, N. Feito, and C. Santiuste. 2021. “Drilling of biocomposite materials: Modelling and experimental validation.„Simulation Modelling Practice and Theory 106:102203. https://doi.org/10.1016/j.simpat.2020.102203 .
   Google Scholar
• Díaz-Álvarez, A., Á. Rubio-López, C. Santiuste, and M. H. Miguélez. 2018. Experimental analysis of drilling induced damage in biocomposites. Textile Research Journal 88 (22):2544–58. doi:10.1177/0040517517725118.
   Web of Science ®Google Scholar
• Durão, L. M. P., D. J. S. Gonçalves, J. M. R. S. Tavares, V. H. C. de Albuquerque, T. H. Panzera, L. J. Silva, A. A. Vieira, and A. P. M. Baptista. 2013. Drilling delamination outcomes on glass and sisal reinforced plastics. Materials Science Forum, 730, 301–306. Trans Tech Publications Ltd.
   Google Scholar
• Durão, L. M. P., J. M. R. S. Tavares, V. H. C. De Albuquerque, J. F. S. Marques, and O. N. G. Andrade. 2014. Drilling damage in composite material. Materials 7 (5):3802–19. doi:10.3390/ma7053802.
   PubMed Web of Science ®Google Scholar
• Erturk, A. T., F. Vatansever, E. Yarar, E. A. Guven, and T. Sinmazcelik. 2020. Effects of cutting temperature and process optimization in drilling of GFRP composites. Journal of Composite Materials:15. doi:10.1177/0021998320947143.
   Google Scholar
• Feito, N., J. Díaz-Álvarez, A. Díaz-Álvarez, J. L. Cantero, and M. H. Miguélez. 2014. Experimental analysis of the influence of drill point angle and wear on the drilling of woven CFRPs. Materials 7 (6):4258–71. doi:10.3390/ma7064258.
   PubMed Web of Science ®Google Scholar
• Fernández, J. A., N. Le Moigne, A. S. Caro-Bretelle, R. El Hage, A. Le Duc, M. Lozachmeur, P. Bono, and A. Bergeret. 2016. Role of flax cell wall components on the microstructure and transverse mechanical behaviour of flax fabrics reinforced epoxy biocomposites. Industrial Crops and Products 85:93–108. doi:10.1016/j.indcrop.2016.02.047.
   Web of Science ®Google Scholar
• Furtos, G., L. Silaghi-Dumitrescu, P. Pascuta, C. Sarosi, and K. Korniejenko. 2019. Mechanical Properties of Wood Fiber Reinforced Geopolymer Composites with Sand Addition. Journal of Natural Fibers 1–12. doi:10.1080/15440478.2019.1621792.
   Google Scholar
• Giasin, K., S. Ayvar-Soberanis, and A. Hodzic. 2015. An experimental study on drilling of unidirectional GLARE fibre metal laminates. Composite Structures 133:794–808. doi:10.1016/j.compstruct.2015.08.007.
   Web of Science ®Google Scholar
• Gohil, P. P., V. Chaudhary, and K. Patel. 2015. Challenges in machining of natural fibre composites. In Manufacturing of Natural Fibre Reinforced Polymer Composites, Original edition, 139–53. Cham: Springer.
   Google Scholar
• Gokulkumar, S., P. R. Thyla, R. ArunRamnath, and N. Karthi. 2020. Acoustical analysis and drilling process optimization of Camellia sinensis/Ananas comosus/GFRP/epoxy composites by TOPSIS for indoor applications. Journal of Natural Fibers 1–18. doi:10.1080/15440478.2020.1726240.
   Web of Science ®Google Scholar
• Happey, F. 1979. Applied fibre science, Vol. 2. London, Academic Press.
   Google Scholar
• Hejjaji, A., D. Singh, S. Kubher, D. Kalyanasundaram, and S. Gururaja. 2016. Machining damage in FRPs: Laser versus conventional drilling. Composites. Part A, Applied Science and Manufacturing 82:42–52. doi:10.1016/j.compositesa.2015.11.036.
   Web of Science ®Google Scholar
• Hocheng, H., and C. C. Tsao. 2005. The path towards delamination-free drilling of composite materials. Journal of Materials Processing Technology 167 (2–3):251–64. doi:10.1016/j.jmatprotec.2005.06.039.
   Web of Science ®Google Scholar
• Ismail, S. O., H. N. Dhakal, E. Dimla, J. Beaugrand, and I. Popov. 2016. Effects of drilling parameters and aspect ratios on delamination and surface roughness of lignocellulosic HFRP composite laminates. Journal of Applied Polymer Science 133:7. doi:10.1002/app.42879.
   Web of Science ®Google Scholar
• Jain, A., B. Singh, and Y. Shrivastava. 2019. Reducing the heat-affected zone during the laser beam drilling of basalt-glass hybrid composite. Composites Part B: Engineering 176:107294. doi:10.1016/j.compositesb.2019.107294.
   Web of Science ®Google Scholar
• Jayabal, S., S. Velumani, P. Navaneethakrishnan, and K. Palanikumar. 2013. Mechanical and machinability behaviors of woven coir fiber-reinforced polyester composite. Fibers and Polymers 14 (9):1505–14. doi:10.1007/s12221-013-1505-5.
   Web of Science ®Google Scholar
• Jayabal, S., and U. Natarajan. 2010. Optimization of thrust force, torque, and tool wear in drilling of coir fiber-reinforced composites using Nelder–Mead and genetic algorithm methods. The International Journal of Advanced Manufacturing Technology 51 (1–4):371–81. doi:10.1007/s00170-010-2605-7.
   Web of Science ®Google Scholar
• Jayabal, S., and U. Natarajan. 2011. Drilling analysis of coir-fibre-reinforced polyester composites. Bulletin of Materials Science 34 (7):1563–67. doi:10.1007/s12034-011-0359-y.
   Web of Science ®Google Scholar
• Jayabal, S., U. Natarajan, and U. Sekar. 2011. Regression modeling and optimization of machinability behavior of glass-coir-polyester hybrid composite using factorial design methodology. The International Journal of Advanced Manufacturing Technology 55 (1–4):263–73. doi:10.1007/s00170-010-3030-7.
   Web of Science ®Google Scholar
• Joshi, S. V., L. T. Drzal, A. K. Mohanty, and S. Arora. 2004. Are natural fiber composites environmentally superior to glass fiber reinforced composites? Composites. Part A, Applied Science and Manufacturing 35 (3):371–76. doi:10.1016/j.compositesa.2003.09.016.
   Web of Science ®Google Scholar
• Kabir, MM, Hao Wang, KT Lau, and Francisco Cardona. 2012. Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview.Composites Part B: Engineering 43 (7):2883–2892
   Google Scholar
• Kalirasu, S., N. Rajini, S. Rajesh, J. T. Winowlin Jappes, and K. Karuppasamy. 2017. AWJM Performance of jute/polyester composite using MOORA and analytical models. Materials and Manufacturing Processes 32 (15):1730–39. doi:10.1080/10426914.2017.1279314.
   Web of Science ®Google Scholar
• Kerrigan, K., J. Thil, R. Hewison, and G. E. O’Donnell. 2012. An integrated telemetric thermocouple sensor for process monitoring of CFRP milling operations. In Fifth Cirp Conference on High Performance Cutting 2012, Zurich, Switzerland, ed. K. Wegener, 449–54.
   Google Scholar
• Kuzu, A. T., and M. Bakkal. 2016. The effect of cutting parameters and tool geometry on machinability of cotton-fiber reinforced polymer composites: Cutting forces, burr formation, and chip morphology. Journal of Industrial Textiles 45 (6):1364–82. doi:10.1177/1528083714560253.
   Web of Science ®Google Scholar
• Li, Y., Y.-W. Mai, and Y. Lin. 2000. Sisal fibre and its composites: A review of recent developments. Composites Science and Technology 60 (11):2037–55. doi:10.1016/S0266-3538(00)00101-9.
   Web of Science ®Google Scholar
• Lilholt, H., and J. Mark Lawther. 2000. 1.10 - Natural Organic Fibers. In: Chou T-W, editor. Comprehensive composite materials encyclopedia. Fiber reinforcements and general theory of composites, Oxford: Elsevier Science 1:303–25.
   Google Scholar
• Lilly, M. J., P. Sivashankari, M. Sangeetha, K. R. Kavitha, and S. Prakash. 2020. Genetic optimization of machining parameters affecting thrust force during drilling of pineapple fiber composite plates – an experimental approach. Journal of Natural Fibers 1–12. doi:10.1080/15440478.2020.1788484.
   Web of Science ®Google Scholar
• Liu, D., Y. Tang, and W. L. Cong. 2012. A review of mechanical drilling for composite laminates. Composite Structures 94 (4):1265–79. doi:10.1016/j.compstruct.2011.11.024.
   Web of Science ®Google Scholar
• Lotfi, A., H. Li, and D. V. Dao. 2018. Drilling Behavior of Flax/Poly(Lactic Acid) Bio-Composite Laminates: An Experimental Investigation. Journal of Natural Fibers 1–17. doi:10.1080/15440478.2018.1558158.
   Web of Science ®Google Scholar
• Lotfi, A., H. Li, D. V. Dao, and G. Prusty. 2019. Natural fiber–reinforced composites: A review on material, manufacturing, and machinability. Journal of Thermoplastic Composite Materials:089270571984454. doi:10.1177/0892705719844546.
   Google Scholar
• Maleki, R., M. H. Hadi, M. Kubouchi, and Y. Arao. 2019b. Experimental study on drilling of jute fiber reinforced polymer composites. Journal of Composite Materials 53 (3):283–95. doi:10.1177/0021998318782376.
   Web of Science ®Google Scholar
• Mishra, R., J. Wiener, J. Militky, M. Petru, B. Tomkova, and J. Novotna. 2020. Bio-composites reinforced with natural fibers: comparative analysis of thermal, static and dynamic-mechanical properties. Fibers and Polymers 21 (3):619–27. doi:10.1007/s12221-020-9804-0.
   Web of Science ®Google Scholar
• Nasir, A., A. Abdul, A. I. Azmi, T. C. Lih, and M. S. A. Majid. 2019. Critical thrust force and critical feed rate in drilling flax fibre composites: A comparative study of various thrust force models. Composites Part B: Engineering 165:222–32. doi:10.1016/j.compositesb.2018.11.134.
   Web of Science ®Google Scholar
• Nasir, A., A. Akmal, A. I. Azmi, T. C. Lih, A. Nabil, M. Khalil, and N. K. Kim. 2018. Tensile behaviour of open hole flax/epoxy composites: Influence of fibre lay-up and drilling parameters. Journal of Composite Materials 53 (4):445–54. doi:10.1177/0021998318785955.
   Web of Science ®Google Scholar
• Nasir, A. A. A., A. I. Azmi, and A. N. M. Khalil. 2015. Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites. Measurement 75:298–307. doi:10.1016/j.measurement.2015.07.046.
   Web of Science ®Google Scholar
• Nassar, M. M. A., R. Arunachalam, and K. I. Alzebdeh. 2017. Machinability of natural fiber reinforced composites: A review. The International Journal of Advanced Manufacturing Technology 88 (9):2985–3004. doi:10.1007/s00170-016-9010-9.
   Web of Science ®Google Scholar
• Navaneethakrishnan, S., and A. Athijayamani. 2016. Measurement and analysis of thrust force and torque in drilling of sisal fiber polymer composites filled with coconut shell powder. International Journal of Plastics Technology 20 (1):42–56. doi:10.1007/s12588-016-9139-2.
   Web of Science ®Google Scholar
• Pailoor, S. H., N. Narasimha Murthy, and T. N. Sreenivasa. 2019. Drilling of in-line compression molded jute/polypropylene composites. Journal of Natural Fibers 1–14. doi:10.1080/15440478.2019.1612309.
   Web of Science ®Google Scholar
• Parthipan, N., M. Ilangkumaran, T. Maridurai, and S. C. Prasanna. 2020. Effect of silane treated silicon (IV) oxide nanoparticle addition on mechanical, impact damage and drilling characteristics of kenaf fibre-reinforced epoxy composite. Silicon 12 (2):459–67. doi:10.1007/s12633-019-00138-0.
   Web of Science ®Google Scholar
• Patel, J. K., and A. A. Shaikh. 2014. An experimental investigation of AWJ parameters on banana fiber reinforced composite. Int J Eng Res Technol 3:608–13.
   Google Scholar
• Prabu, V. A., S. Thirumalai Kumaran, and M. Uthayakumar. 2017. Performance evaluation of abrasive water jet machining on banana fiber reinforced polyester composite. Journal of Natural Fibers 14 (3):450–57. doi:10.1080/15440478.2016.1212768.
   Web of Science ®Google Scholar
• Rajaraman, G., S. K. Agasti, and M. P. Jenarthanan. 2020. Investigation on effect of process parameters on delamination during drilling of kenaf-banana fiber reinforced in epoxy hybrid composite using Taguchi method. Polymer Composites 41 (3):994–1002. doi:10.1002/pc.25431.
   Web of Science ®Google Scholar
• Rajmohan, T., R. Vinayagamoorthy, and K. Mohan. 2019. Review on effect machining parameters on performance of natural fibre–reinforced composites (NFRCs). Journal of Thermoplastic Composite Materials 32 (9):1282–302. doi:10.1177/0892705718796541.
   Web of Science ®Google Scholar
• Ramesh, M., K. Palanikumar, and K. Hemachandra Reddy. 2014. Influence of tool materials on thrust force and delamination in drilling sisal-glass fiber reinforced polymer (S-GFRP) composites. Procedia Materials Science 5:1915–21. doi:10.1016/j.mspro.2014.07.513.
   Google Scholar
• Ramesha, N., and S. Akhtar. 2016. Abrasive water jet machining and mechanical behavior of banyan tree saw dust powder loaded polypropylene green composites. Polymer Composites 37 (6):1754–64. doi:10.1002/pc.23348.
   Web of Science ®Google Scholar
• Rao, S., A. Sethi, A. K. Das, N. Mandal, P. Kiran, R. Ghosh, A. R. Dixit, and A. Mandal. 2017. Fiber laser cutting of CFRP composites and process optimization through response surface methodology. Materials and Manufacturing Processes 32 (14):1612–21. doi:10.1080/10426914.2017.1279296.
   Web of Science ®Google Scholar
• Reux, F. 2012. Worldwide composites market: Main trends of the composites industry. 5th Innovative Composites summit-JEC ASIA 2012:26–28.
   Google Scholar
• Rezghi Maleki, H., M. Hamedi, M. Kubouchi, and Y. Arao. 2019a. Experimental investigation on drilling of natural flax fiber-reinforced composites. Materials and Manufacturing Processes 34 (3):283–92. doi:10.1080/10426914.2018.1532584.
   Web of Science ®Google Scholar
• Rowell, R. M. 2008. 1 - Natural fibres: Types and properties. In Properties and Performance of Natural-Fibre Composites, ed. K. L. Pickering, 3–66. Cambridge, UK: Woodhead Publishing.
   Google Scholar
• Rowell, R. M., and H. P. Stout. 2007. Jute and kenaf. Handbook of fiber chemistry. International Fiber Science and Technology Series 16:409–56.
   Google Scholar
• Roy Choudhury, M., and K. Debnath. 2020. A study of drilling behavior of unidirectional bamboo fiber-reinforced green composites. Journal of the Institution of Engineers (India): Series C 101 (2):219–27. doi:10.1007/s40032-019-00550-w.
   Google Scholar
• Roy Choudhury, M., M. S. Srinivas, and K. Debnath. 2018. Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates. Journal of Manufacturing Processes 34:51–61. doi:10.1016/j.jmapro.2018.05.032.
   Web of Science ®Google Scholar
• Salleh, Z., M. N. Berhan, K. M. Hyie, Y. M. Taib, A. Kalam, and N. R. Nik Roselina. 2013. Open hole tensile properties of kenaf composite and kenaf/fibreglass hybrid composite laminates. Procedia Engineering 68:399–404. doi:10.1016/j.proeng.2013.12.198.
   Google Scholar
• Shah, D. U., P. J. Schubel, P. Licence, and M. J. Clifford. 2012. Hydroxyethylcellulose surface treatment of natural fibres: The new ‘twist’ in yarn preparation and optimization for composites applicability. Journal of Materials Science 47 (6):2700–11. doi:10.1007/s10853-011-6096-1.
   Web of Science ®Google Scholar
• Sorrentino, L., S. Turchetta, and C. Bellini. 2017. In process monitoring of cutting temperature during the drilling of FRP laminate. Composite Structures 168:549–61. doi:10.1016/j.compstruct.2017.02.079.
   Web of Science ®Google Scholar
• Sridharan, V., and N. Muthukrishnan. 2013. Optimization of machinability of polyester/modified jute fabric composite using grey relational analysis (GRA). Procedia Engineering 64:1003–12. doi:10.1016/j.proeng.2013.09.177.
   Google Scholar
• Sridharan, V., T. Raja, and N. Muthukrishnan. 2016. Study of the effect of matrix, fibre treatment and graphene on delamination by drilling jute/epoxy nanohybrid composite. Arabian Journal for Science and Engineering 41 (5):1883–94. doi:10.1007/s13369-015-2005-2.
   Web of Science ®Google Scholar
• Sumesh, K. R., K. Kanthavel, and V. Kavimani. 2020. Machinability of hybrid natural fiber reinforced composites with cellulose micro filler incorporation. Journal of Composite Materials :0021998320918020. doi:10.1177/0021998320918020.
   Google Scholar
• Tan, C. L., and A. I. Azmi. 2017. Analytical study of critical thrust force for on-set delamination damage of drilling hybrid carbon/glass composite. International Journal of Advanced Manufacturing Technology 92 (1–4):929–41. doi:10.1007/s00170-017-0152-1.
   Web of Science ®Google Scholar
• Tewari, R., M. K. Singh, S. Zafar, and S. Powar. 2020. Parametric optimization of laser drilling of microwave-processed kenaf/HDPE composite. Polymers and Polymer Composites:0967391120905705. doi:10.1177/0967391120905705.
   Web of Science ®Google Scholar
• Unde, P. D., M. D. Gayakwad, and R. S. Ghadge. 2014. Abrasive water jet machining of composite materials–a review. Int J Innov Res Sci Eng Technol 3:6–8.
   Google Scholar
• Velumani, S., P. Navaneethakrishnan, S. Jayabal, and D. S. R. Smart. 2013. Mathematical modeling and prediction of the thrust force and torque in drilling of sisal/glass-vinyl ester hybrid composite using the RSM, MLPNN, RBFN and ENN methods. Indian Journal of Engineering and Materials Sciences 20 (4):289–98.
   Web of Science ®Google Scholar
• Venkateshwaran, N., and A. ElayaPerumal. 2013. Hole quality evaluation of natural fiber composite using image analysis technique. Journal of Reinforced Plastics and Composites 32 (16):1188–97. doi:10.1177/0731684413486847.
   Web of Science ®Google Scholar
• Vinayagamoorthy, R., I. V. Manoj, G. Narendra Kumar, I. Sai Chand, G. V. Sai Charan Kumar, and K. Suneel Kumar. 2018. A central composite design based fuzzy logic for optimization of drilling parameters on natural fiber reinforced composite. Journal of Mechanical Science and Technology 32 (5):2011–20. doi:10.1007/s12206-018-0409-0.
   Web of Science ®Google Scholar
• Vinayagamoorthy, R., and T. Rajmohan. 2018. Machining and its challenges on bio-fibre reinforced plastics: A critical review. Journal of Reinforced Plastics and Composites 37 (16):1037–50. doi:10.1177/0731684418778356.
   Web of Science ®Google Scholar
• Wambua, P., J. Ivens, and I. Verpoest. 2003. Natural fibres: Can they replace glass in fibre reinforced plastics? Composites Science and Technology 63 (9):1259–64. doi:10.1016/S0266-3538(03)00096-4.
   Web of Science ®Google Scholar
• Witten, E., and A. Schuster. 2010. Composites market report: Market developments, challenges, and chances. In Industrievereinigung verstärkte kunststoffe and carbon composites. https://www.avk-tv.de/files/20110421_avkgesamt_marktbericht_2010_lang_eng.pdf
   Google Scholar
• Woo, T. K., F. Ahmad, S. Sharif, and M. A. Maoinser. 2014. Effects of Drilling Generated Heat on Damage Factor in GFRP, 594:661–665. Trans Tech Publ. https://doi.org/10.4028/www.scientific.net/kem.594-595.661
   Google Scholar
• Yallew, T. B., P. Kumar, and I. Singh. 2016. A study about hole making in woven jute fabric-reinforced polymer composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 (4):888–98. doi:10.1177/1464420715587750.
   Web of Science ®Google Scholar