175
Views
4
CrossRef citations to date
0
Altmetric
Research Article

Analysis of Force, Temperature, and Surface Roughness during End Milling of Green Composites

, , &

References

  • Azmi, H., C. H. C. Haron, J. A. Ghani, M. Suhaily, and A. R. Yuzairi. 2018. “Machinability study on milling kenaf fiber reinforced plastic composite materials using design of experiments.” IOP Conference Series: Materials Science and Engineering344:012027–42. United kingdom.
  • Babu, G. D., K. S. Babu, and B. U. M. Gowd. 2013. “Effect of machining parameters on milled natural fiber-reinforced plastic composites.” Journal of Advanced Mechanical Engineering 1:1–12.
  • Bajpai, P. K., K. Debnath, and I. Singh. 2017. “Hole making in natural fiber-reinforced polylactic acid laminates: An experimental investigation.” Journal of Thermoplastic Composite Materials 30 (1):30–46. doi:10.1177/0892705715575094.
  • Balasubramanian, K., M. T. H. Sultan, F. Cardona, and N. Rajeswari. 2016. “Machining analysis of natural fibre reinforced composites using fuzzy logic.” IOP Conference Series: Materials Science and Engineering 152:1–8. Bali, Indonesia.
  • Bin Harun, A., C. H. Bin Che Haron, S. Binti Mokhtar, and S. T. Ting. 2015. “Study the effect of milling parameters on surface roughness during milling kenaf fibre reinforced plastic.” Advances in Environmental Biology 9:46–53.
  • Çelik, Y. H., E. Kilickap, and A. İ. Kilickap. 2019. “An experimental study on milling of natural fiber (jute)- reinforced polymer composites.” Journal of Composite Materials 53 (22):3127–37. doi:10.1177/0021998319826373.
  • Chegdani, F., S. Mezghani, M. E. I. Mansori, and A. Mkaddem. 2015. “Fiber type effect on tribological behavior when cutting natural fiber reinforced plastics.” Wear 332-333:772–79. doi:10.1016/j.wear.2014.12.039.
  • Choudhury, M. R., and K. Debnath. 2019. “Experimental analysis of tensile and compressive failure load in single-lap bolted joint of green composites.” Composite Structures 225:111180–92. doi:10.1016/j.compstruct.2019.111180.
  • Davim, J. P., and P. Reis. 2005. “Damage and dimensional precision on milling carbon fiber-reinforced plastics using design experiments.” Journal of Materials Processing Technology 160 (2):160–67. doi:10.1016/j.jmatprotec.2004.06.003.
  • Davim, J. P., P. Reis, and C. C. Antonio. 2004. “A study on milling of glass fiber reinforced plastics manufactured by hand-lay up using statistical analysis (ANOVA).” Composite Structures 64 (3–4):493–500. doi:10.1016/j.compstruct.2003.09.054.
  • Jenarthanan, M. P., and R. Jeyapaul. 2013. “Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method.” International Journal of Engineering Science and Technology 5 (4):22–36. doi:10.4314/ijest.v5i4.3.
  • Karabulut, S. 2016. “Study on machining parameters for thrust force and torque in milling aa7039 composites reinforced with al2o3/b4c/sic particles.” International Journal of Engineering Technologies 2 (2):68–75. doi:10.19072/ijet.05966.
  • KoPlev, A. A., A. Lystrup, and T. Vorm. 1983. “The cutting process, chips, and cutting forces in machining CFRP.” Composites 14 (4):371–76. doi:10.1016/0010-4361(83)90157-X.
  • Nassar, M. M. A., R. Arunachalam, and K. I. Alzebdeh. 2017. “Machinability of natural fiber reinforced composites: A review.” The International Journal of Advanced Manufacturing Technology 88 (9–12):2985–3004. doi:10.1007/s00170-016-9010-9.
  • Patel, P., V. Chaudhary, K. Patel, and P. Gohil. 2018. “Milling of polymer matrix composites: A review.” International Journal of Applied Engineering Research 13:7455–65.
  • Pozo Morales, A., A. Güemes, A. Fernandez-Lopez, V. Carcelen Valero, and S. D. L. Rosa Llano. 2017. “Bamboo–polylactic acid (PLA) composite material for structural applications.” Materials 10 (11):1286–97. doi:10.3390/ma10111286.
  • Rajmohan, T., R. Vinayagamoorthy, and K. Mohan. 2019. “Review on effect machining parameters on performance of natural fibre–reinforced composites (NFRCs).” Journal of Thermoplastic Composite Materials 32 (9):1282–302. doi:10.1177/0892705718796541.
  • Salem, T. F., S. Tirkes, A. O. Akar, and U. Tayfun. 2020. “Enhancement of mechanical, thermal and water uptake performance of TPU/jute fiber green composites via chemical treatments on fiber surface.” e-Polymers 20 (1):133–43. doi:10.1515/epoly-2020-0015.
  • Sankar, B. R., P. Umamaheswarrao, V. Srinivasulu, and G. K. Chowdari. 2015. “Optimization of milling process on jute polyester composite using Taguchi based grey relational analysis coupled with principle component analysis.” Materials Today: Proceedings 2:2522–31.
  • Sorrentino, L., and S. Turchetta. 2014. “Cutting forces in milling of carbon fibre reinforced plastics.” International Journal of Manufacturing Engineering 2014:1–8. doi:10.1155/2014/439634.
  • Vinayagamoorthy, R., and N. Rajeswari. 2012. “Analysis of cutting forces during milling of natural fibered composites using fuzzy logic.” International Journal of Composite Materials and Manufacturing 2:15–21.
  • Wang, C., G. Liu, Q. An, and M. Chen. 2017. “Occurrence and formation mechanism of surface cavity defects during orthogonal milling of CFRP laminates.” Composites Part B: Engineering 109:10–22. doi:10.1016/j.compositesb.2016.10.015.
  • Wang, G. D., D. Suntoo, N. Li, T. Peng, and Y. Li. 2018. “Experimental research in CFRP/Ti stack through different helical milling strategies.” The International Journal of Advanced Manufacturing Technology 98 (9–12):3251–67. doi:10.1007/s00170-018-2449-0.
  • Wang, H., J. Sun, J. Li, L. Lu, and N. Li. 2016. “Evaluation of cutting force and cutting temperature in milling carbon fiber-reinforced polymer composites.” The International Journal of Advanced Manufacturing Technology 82 (9–12):1517–25. doi:10.1007/s00170-015-7479-2.
  • Wu, F., M. Misra, and A. K. Mohanty. 2020. “Sustainable green composites from biodegradable plastics blend and natural fibre with balanced performance: Synergy of nano-structured blend and reactive extrusion.” Composites Science and Technology 108369–76. doi:10.1016/j.compscitech.2020.108369.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.