215
Views
5
CrossRef citations to date
0
Altmetric
Research Article

Mechanical Characterization and Damage Analysis of Carbon/Flax Hybrid Laminates with Holes Machined by Abrasive Water Jet

, , & ORCID Icon

References

  • Al-Hajaj, Z., A. Sarwar, R. Zdero, and H. Bougherara. 2019. In-situ damage assessment of a novel carbon/flax/epoxy hybrid composite under tensile and compressive loading. Journal of Composite Materials 53 (19):2701–14. doi:10.1177/0021998319839129.
  • Al-Hajaj, Z., R. Zdero, and H. Bougherara. 2018. Mechanical, morphological, and water absorption properties of a new hybrid composite material made from 4 harness satin woven carbon fibres and flax fibres in an epoxy matrix. Composites Part A 115:46–56. doi:10.1016/j.compositesa.2018.09.015.
  • Bagheri, Z. S., I. E. El Sawi, E. H. Schemitsch, R. Zdero, and H. Bougherara. 2013. Biomechanical properties of an advanced new carbon/flax/epoxy composite material for bone plate applications. Journal of Mechanical Behavior of Biomedical Materials 20:398–406. doi:10.1016/j.jmbbm.2012.12.013.
  • Bagheri, Z. S., I. E. Sawi, H. C. Emil, H. Bougherara, and R. Zdero. 2014. Biomechanical fatigue analysis of an advanced new carbon fiber/flax/epoxy plate for bone fracture repair using conventional fatigue tests and thermography. Journal of Mechanical Behavior of Biomedical Materials 35:27–38. doi:10.1016/j.jmbbm.2014.03.008.
  • Calabrese, L., V. Fiore, P. Bruzzaniti, T. Scalici, and A. Valenza. 2020. Pinned hybrid glass-flax composite laminates aged in salt-fog environment: Mechanical durability. Polymers 12 (1):40. doi:10.3390/polym12010040.
  • Dhakal, H. N., S. O. Ismail, S. O. Ojo, M. Paggi, and J. R. Smith. 2018. Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: A comprehensive analysis of machining-induced damage responses. The International Journal of Advanced Manufacturing Technology 99 (9–12):2833–47. doi:10.1007/s00170-018-2670-x.
  • Dhanawade, A., and S. Kumar. 2017. Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jet . Journal of Composite Materials 51 (24):3373–90. doi:10.1177/0021998316688950.
  • Díaz-Álvarez, A., Á. Rubio-López, C. Santiuste, and M. H. Miguélez. 2018. Experimental analysis of drilling induced damage in biocomposites. Textile Research Journal 88 (22):2544–58. doi:10.1177/0040517517725118.
  • Díaz-Álvarez, A., J. Díaz-Álvarez, N. Feito, and C. Santiuste. 2021. Drilling of biocomposite materials: Modelling and experimental validation. Simulation Modelling Practice and Theory 106:102203. doi:10.1016/j.simpat.2020.102203.
  • Dong, C. 2018. Review of Natural Fibre Reinforced Hybrid Composites. Journal of Reinforced Plastics and Composites 37 (5):331–48. doi:10.1177/0731684417745368.
  • Ekeoseye, W. S., K. Kolasangiani, C. D. O. Donatus, and H. Bougherara. 2020. ModeII Interlaminar Fracture Toughness of Flax/Glass/Epoxy Hybrid Composite Materials: An Experimental and Numerical Study. Journal of Natural Fibers 1–15. doi:10.1080/15440478.2020.1856277.
  • El Sawi, I., Z. Fawaz, R. Zitoune, and H. Bougherara. 2014. An investigation of the effect of the machining processes of circular holes on the mechanical behaviour of flax fiber reinforced polymer. 16th Eur Conf Compos Mater ECCM 2014. 22–26.
  • El-Hofy, M., M. O. Helmy, G. Escobar-Palafox, K. Kerrigan, R. Scaife, and H. El-Hofy. 2018. Abrasive Water Jet Machining of Multidirectional CFRP Laminates. Procedia CIRP 68:535–40. doi:10.1016/j.procir.2017.12.109.
  • Fiore, V., L. Calabrese, T. Scalici, and A. Valenza. 2020. Evolution of the bearing failure map of pinned flax composite laminates aged in marine environment. Composites Part B 87:107864. doi:10.1016/j.compositesb.2020.107864.
  • Fiore, V., L. Calabrese, T. Scalici, P. Bruzzaniti, and A. Valenza. 2018. Bearing strength and failure behavior of pinned hybrid glass-flax composite laminates. Polymer Testing 69:310–19. doi:10.1016/j.polymertesting.2018.04.041.
  • Gobi, K. T., S. Pawar, and K. B. Cheng. 2018. Prediction of open-hole tensile strength of unidirectional flax yarn reinforced polypropylene composite by analytical and numerical models. Indian Journal of Fibre & Textile Research 43:277–84.
  • Habibi, M., and L. Luc. 2020. Digital image correlation and acoustic emission for damage analysis during tensile loading of open-hole flax laminates. Engineering Fracture Mechanics 228:1–12. doi:10.1016/j.engfracmech.2020.106921.
  • Islam, M. Z., and C. A. Ulven. 2020. A thermographic and energy based approach to define high cycle fatigue strength of flax fiber reinforced thermoset composites. Composites Science and Technology 196:108233. doi:10.1016/j.compscitech.2020.108233.
  • Kandare, E., S. Yoo, V. Chevali, and A. Khatibi. 2018. On the notch sensitivity of flax fibre metal laminates under static and fatigue loading. Fatigue & Fracture of Engineering Materials & Structures 41 (8):1691–705. doi:10.1111/ffe.12807.
  • Kannan, T. G., C. Wu, and K. Cheng. 2012. A study on the open hole tension of the unidirectional flax yarn reinforced composites. Proceedings of the 15th European Conference on Compos Mater (ECCM15).
  • Kannan, T. G., C. M. Wu, and K. B. Cheng. 2013. Open hole flexural and izod impact strength of unidirectional flax yarn reinforced polypropylene composites as a function of laminate lay‐up. Polymer Composites 34 (11):1912–20. doi:10.1002/pc.22598.
  • Kannan, T. G., C. M. Wu, and K. B. Cheng. 2014. Influence of laminate lay-up, hole size and coupling agent on the open hole tensile properties of flax yarn reinforced polypropylene laminates. Composites Part B 57:80–85. doi:10.1016/j.compositesb.2013.09.042.
  • Kumaran, S. T., S. Thirumalai, T. J. Ko, M. Uthayakumar, and M. M. Islam. 2017. Prediction of surface roughness in abrasive water jet. Journal of Alloys and Compounds 724:1037–45. doi:10.1016/j.jallcom.2017.07.108.
  • Lotfi, A., H. Li, and D. V. Dao. 2020. Analytical and experimental investigation of the parameters in drilling flax/poly (lactic acid) bio-composite laminates. The International Journal of Advanced Manufacturing Technology 109 (1–2):503–21. doi:10.1007/s00170-020-05668-1.
  • Mahboob, Z., I. E. Sawi, R. Zdero, Z. Fawaz, and H. Bougherara. 2017. Tensile and compressive damaged response in Flax fibre reinforced epoxy composites. Composites 92:118–33. doi:10.1016/j.compositesa.2016.11.007.
  • Modniks, J., E. Spārniņš, J. Andersons, and W. Becker. 2015. Analysis of the effect of a stress raiser on the strength of a UD flax/epoxy composite in off-axis tension. Journal of Composite Materials 49 (9):1071–80. doi:10.1177/0021998314528827.
  • Montesano, J., H. Bougherara, and Z. Fawaz. 2013. Influence of drilling and abrasive water jet induced damage on the performance of carbon fabric/epoxy plates with holes. Composite Structures 163:257–66. doi:10.1016/j.compstruct.2016.12.007.
  • Nasir, A. A., A. Azmi, and A. Khalil. 2014. Investigating the effect of machining parameters on mechanical performance of flax natural fibre composites with circular holes. Conference of advances in material processing technologies.
  • Nasir, A. A., A. Azmi, and A. Khalil. 2015a. Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites. Measurement 75:298–307. doi:10.1016/j.measurement.2015.07.046.
  • Nasir, A. A., A. Azmi, and A. Khalil. 2015b. Parametric study on the residual tensile strength of flax natural fibre composites after drilling operation. Procedia Manufacturing 2:97–101. doi:10.1016/j.promfg.2015.07.017.
  • Nasir, A. A., A. I. Azmi, A. T. Chye Lih, A. N. Mohd. Khalil, and N. K. Kim. 2019a. Tensile behaviour of open hole flax/epoxy composites: Influence of fibre lay-up and drilling parameters. Journal of Composite Materials 53 (4):445–54. doi:10.1177/0021998318785955.
  • Nasir, A. A. A., A. I. Azmi, T. C. Lih, and M. S. A. Majid. 2019b. Critical thrust force and critical feed rate in drilling flax fibre composites: A comparative study of various thrust force models. Composites Part B 165:222–32. doi:10.1016/j.compositesb.2018.11.134.
  • Nasir, A. A. A., A. I. Azmi, T. C. Lih, and N. A. Shuaib. 2018. Experimental study towards determination of critical feed for minimization of delamination damage in drilling flax natural fibre composites. Procedia CIRP 77:191–94. doi:10.1016/j.procir.2018.08.283.
  • Phapale, K., R. Singh, S. Patil, and R. Singh. 2016. Delamination characterization and comparative assessment of delamination control techniques in abrasive water jet drilling of CFRP. Procedia Manufacturing 5:521–35. doi:10.1016/j.promfg.2016.08.043.
  • Pickering, K. L., M. A. Efendy, and T. M. Le. 2016. A review of recent developments in natural fibre composites and their mechanical performance. Composites. Part A, Applied Science and Manufacturing 83:98–112. doi:10.1016/j.compositesa.2015.08.038.
  • Rajamurugan, G., A. P. Sanjay, P. Krishnasamy, B. Muralidharan, and S. Jain. 2020. Drilling and mechanical performance analysis on flax-sisal hybrid composite embedded with perforated aluminum foil. Journal of Reinforced Plastics and Composites 39 (23–24):902–17. doi:10.1177/0731684420937070.
  • Rezghi Maleki, H., M. Hamedi, M. Kubouchi, and Y. Arao. 2019. Experimental investigation on drilling of natural flax fiber-reinforced composites. Materials and Manufacturing Processes 34 (3):283–92. doi:10.1080/10426914.2018.1532584.
  • Saleem, M., L. Toubal, R. Zitoune, and H. Bougherara. 2013. Investigating the effect of machining processes on the mechanical behavior of composite plates with circular holes. Composites Part A 55:169–77. doi:10.1016/j.compositesa.2013.09.002.
  • Saleem, M., R. Zitoune, I. El Sawi, and H. Bougherara. 2015. Role of the surface quality on the mechanical behavior of CFRP bolted composite joints. International Journal of Fatigue 80:246–56. doi:10.1016/j.ijfatigue.2015.06.012.
  • Sarwar, A., Z. Mahboob, R. Zdero, and H. Bougherara. 2020. Mechanical characterization of a new Kevlar/Flax/epoxy hybrid composite in a sandwich structure. Polymer Testing 90:1–12. doi:10.1016/j.polymertesting.2020.106680.
  • Shah, D. U., P. J. Schubel, and M. J. Clifford. 2013. Can flax replace E-glass in structural composites? A small wind turbine blade case study. Composites Part B 52:172–81. doi:10.1016/j.compositesb.2013.04.027.
  • Shamsuyeva, M., O. Hansen, and H.-J. Endres. 2019. Review on Hybrid Carbon/Flax Composites and Their Properties. International Journal of Polymer Science 2019:1–17. doi:10.1155/2019/9624670.
  • Westman, M. P., L. S. Fifield, K. L. Simmons, S. Laddha, and T. A. Kafentzis. 2010. Natural fiber composites: A review. Pacific Northwest National Lab. doi:10.2172/989448.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.