Advanced search
Publication Cover
Journal of Natural Fibers Volume 19, 2022 - Issue 14
Submit an article Journal homepage
289
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Comparative Analysis of Molded and Drilled Holes in Jute Fiber Reinforced Plastic Laminates

Jayant Kumara Department of Mechanical & Industrial Engineering, Indian Institute of Technology, Roorkee, Uttarakhand, India;b Department of Mechanical Engineering, Katihar Engineering College, Katihar, Bihar, IndiaORCID Iconhttps://orcid.org/0000-0001-7172-6640
ORCID Icon &
Inderdeep Singha Department of Mechanical & Industrial Engineering, Indian Institute of Technology, Roorkee, Uttarakhand, IndiaCorrespondence[email protected]
ORCID Iconhttps://orcid.org/0000-0003-4170-1869
ORCID Icon
Pages 7363-7373 | Published online: 14 Jul 2021

References

  • Babu, D. K., S. Babu, and B. Uma Maheswar Gowd. 2012. “Drilling uni-directional fiber-reinforced plastics manufactured by hand lay-up influence of fibers.” American Journal of Materials Science and Technology, 1–10. https://doi.org/10.7726/ajmst.2012.1001.
  • Bajpai, P. K., and I. Singh. 2013. Drilling behavior of sisal fiber-reinforced polypropylene composite laminates. Journal of Reinforced Plastics and Composites 32 (20):1569–76. doi:10.1177/0731684413492866.
  • Bajpai, P. K., K. Debnath, and I. Singh. 2015. Hole making in natural fiber-reinforced polylactic acid laminates: An experimental investigation. Journal of Thermoplastic Composite Materials 1–17. doi:10.1177/0892705715575094.
  • Balaji, N. S., S. Jayabal, S. Kalyana Sundaram, S. Rajamuneeswaran, and P. Suresh. 2014. Delamination analysis in drilling of coir-polyester composites using design of experiments. Advanced Materials Research 984–985:185–93. https://doi.org/10.4028/www.scientific.net/AMR.984-985.185.
  • Chang, L. W., S. S. Yau, and T. W. Chou. 1987. Notched strength of woven fabric composites with moulded-in holes. Composites 18 (3):233–41. doi:10.1016/0010-4361(87)90413-7.
  • Debnath, K., I. Singh, and A. Dvivedi. 2014. Drilling Characteristics of Sisal Fiber-Reinforced Epoxy and Polypropylene Composites. Materials and Manufacturing Processes 29 (11–12):1401–09. doi:10.1080/10426914.2014.941870.
  • Ghasemi Nejhad, M. N., and T. W. Chou. 1990. Compression behaviour of woven carbon fibre-reinforced epoxy composites with moulded-in and drilled holes. Composites 21 (1):33–40. doi:10.1016/0010-4361(90)90096-F.
  • Jayabal, S., and U. Natarajan. 2010. Optimization of thrust force, torque, and tool wear in drilling of coir fiber-reinforced composites using nelder-mead and genetic algorithm methods. International Journal of Advanced Manufacturing Technology 51 (1–4):371–81. doi:10.1007/s00170-010-2605-7.
  • Jayabal, S., U. Natarajan, and U. Sekar. 2011. Regression Modeling and Optimization of Machinability Behavior of Glass-Coir-Polyester Hybrid Composite Using Factorial Design Methodology. International Journal of Advanced Manufacturing Technology 55 (1–4):263–73. doi:10.1007/s00170-010-3030-7.
  • Langella, A., and M. Durante. 2008. Comparison of Tensile Strength of Composite Material Elements with Drilled and Molded-in Holes. Applied Composite Materials 15 (4–6):227–39. doi:10.1007/s10443-008-9069-z.
  • Lin, H. J., and C. C. Tsai. 1995. Failure Analysis of Bolted Connections of Composites with Drilled and Moulded-in Hole. Composite Structures 30 (2):159–68. doi:10.1016/0263-8223(94)00040-9.
  • Lin, H. J., C. C. Tsai, and J. S. Shie. 1995. Failure Analysis of Woven-Fabric Composites with Moulded-in Holes. Composites Science and Technology 55 (3):231–39. doi:10.1016/0266-3538(95)00091-7.
  • Nasir, A., A. Abdul, A. I. Azmi, and A. N. M. Khalil. 2015. Parametric Study on the Residual Tensile Strength of Flax Natural Fibre Composites after Drilling Operation. Procedia Manufacturing 2 (February):97–101. doi:10.1016/j.promfg.2015.07.017.
  • Ng, S. P., P. C. Tse, and K. J. Lau. 2001. Progressive Failure Analysis of 2/2 Twill Weave Fabric Composites with Moulded-in Circular Hole. Composites Part B: Engineering 32 (2):139–52. doi:10.1016/S1359-8368(00)00040-8.
  • Sridharan, V., and N. Muthukrishnan. 2013. Optimization of Machinability of Polyester/Modified Jute Fabric Composite Using Grey Relational Analysis (GRA). Procedia Engineering 64:1003–12. doi:10.1016/j.proeng.2013.09.177.
  • Venkateshwaran, N., and A. ElayaPerumal. 2012. Hole Quality Evaluation of Natural Fiber Composite Using Image Analysis Technique. Journal of Reinforced Plastics and Composites 32 (16):1188–97. doi:10.1177/0731684413486847.
  • Yallew, T. B., P. Kumar, and I. Singh. 2015. “A study about hole making in woven jute fabric-reinforced polymer composites.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 1–11. 10.1177/1464420715587750.
  • Yau, S. S., and T. W. Chou. 1988. Strength of woven-fabric composites with drilled and molded holes. ASTM Special Technical Publication STP (972):423–37. doi:10.1520/stp26150s.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.