220
Views
2
CrossRef citations to date
0
Altmetric
Research Article

Strength and Deformation Behavior of Fine-Grained Soils Reinforced with Hair Fibers and Its Application in Pavement Design

, &

References

  • Abdi, M. R., A. Parsapajouh, and M. A. Arjomand. 2008. Effects of random fibre inclusion on consolidation, hydraulic conductivity, swelling, shrinkage limit and desiccation cracking of clays. International Journal of Civil Engineering 6 (4):284–92.
  • Aggarwal, P., and B. Sharma 2010. Application of jute fiber in the improvement of subgrade characteristics. Proceedings of International Conference on Advances in Civil Engineering, Trabzon, Turkey; 27-30 September 2010.
  • Akbulut, S., S. Arasan, and E. Kalkan. 2007. Modification of clayey soils using scrap tire rubber and synthetic fibers. Applied Clay Science 38 (1–2):23–32. doi:10.1016/j.clay.2007.02.001.
  • Akhtar, J. N., J. Alam, and S. Ahmad. 2008. The influence of randomly oriented hair fibre and lime on the CBR value of Dadri fly ash. Asian Journal of Civil Engineering (Building and Housing) 9 (5):505–12.
  • Akhtar, J. N., and S. Ahmad. 2009. The effect of randomly oriented hair fiber on mechanical properties of fly ash based hollow block for low height masonry structures. Asian Journal of Civil Engineering (Building and Housing) 10 (2):221–28.
  • Anagnostopoulos, C. A., D. Tzetzis, and K. Berketis. 2014. Shear strength behaviour of polypropylene fibre reinforced cohesive soils. Geomechanics and Geoengineering 9 (3):241–51. doi:10.1080/17486025.2013.804213.
  • Anagnostopoulos, C. A., T. T. Papaliangas, D. Konstantinidis, and C. Patronis. 2013. Shear strength of sands reinforced with polypropylene fibers. Geotechnical and Geological Engineering 31 (2):401–23. doi:10.1007/s10706-012-9593-3.
  • ASTM (American Society for Testing and Materials). D2487−11. standard practice for classification of soils for engineering purposes (unified soil classification system). ASTM International, United States.
  • Attom, M. F., N. M. Al-Akhras, and A. I. H. Malkawi. 2009. Effect of fibers on the mechanical properties of clayey soil. Proceedings of the Institute of Civil Engineers, Geotechnical Engineering 162 (GES):277–82. doi:10.1680/geng.2009.162.5.277.
  • Ayothiraman, R., P. Bhuyan, and R. Jain 2014. Comparative studies on performance of human hair and coir fibers against synthetic fibers in soil reinforcement. Singapore: 2nd Annual International Conference on Architecture and Civil Engineering (ACE 2014): 222–27.
  • Babu, S., and K. Vasudevan. 2008. Strength and stiffness response of coir fiber-reinforced tropical soil. Journal of Materials in Civil Engineering, ASCE 20 (9):571–77. doi:10.1061/(ASCE)0899-1561(2008)20:9(571).
  • Basson, M. S., and R. Ayothiraman. 2020. Effect of human hair fiber reinforcement on shrinkage cracking potential of expansive clay. Bulletin of Engineering Geology and the Environment 79 (4):2159–68. doi:10.1007/s10064-019-01685-x.
  • Butt, W. A., B. A. Mir, and J. N. Jha. 2016. Strength behavior of clayey soil reinforced with human hair as a natural fibre. Geotechnical and Geological Engineering 34 (1):411–17. doi:10.1007/s10706-015-9953-x.
  • Chandra, S., M. N. Viladkar, and P. P. Nagrale. 2008. Mechanistic approach for fiber-reinforced flexible pavements. Journal of Transportation Engineering, ASCE 134 (1):15–23. doi:10.1061/(ASCE)0733-947X(2008)134:1(15).
  • Chauhan, M. S., S. Mittal, and B. Mohanty. 2008. A technical note: Performance evaluation of silty sand subgrade reinforced with fly ash and fiber. Geotextiles and Geomembranes 26 (5):29–435. doi:10.1016/j.geotexmem.2008.02.001.
  • Consoli, N. C., M. D. T. Casagrande, P. D. M. Prietto, and A. Thome´. 2003. Plate load test on fiber-reinforced soil. Journal of Geotechnical and Geoenvironmental Engineering 129 (10):951–55. doi:10.1061/(ASCE)1090-0241(2003)129:10(951).
  • Diambra, A., E. Ibraim, M. Wood, and A. Russell. 2010. Fiber reinforced sands: Experiments and modeling. Geotextiles and Geomembranes 28 (3):238–50. doi:10.1016/j.geotexmem.2009.09.010.
  • Eldesouky, H. M., M. M. Morsy, and M. F. Mansour. 2016. Fiber-reinforced sand strength and dilation characteristics. Ain Shams Engineering Journal 7 (2):517–26. doi:10.1016/j.asej.2015.06.003.
  • Estabragh, A. R., A. T. Bordbar, and A. A. Javadi. 2011. Mechanical behavior of a clay soil reinforced with nylon fibers. Geotechnical and Geological Engineering 29 (5):899–908. doi:10.1007/s10706-011-9427-8.
  • Estabragh, A. R., P. Namdar, and A. A. Jawadi. 2012. Behavior of cement-stabilized clay reinforced with nylon fiber. Geosynthetics International 19 (1):85–92. doi:10.1680/gein.2012.19.1.85.
  • Gulhati, S. K., and B. S. Satija 1981. Shear strength of partially saturated soils. Proceedings of 10th International Conference on Soil Mechanics and Foundation Engineering, Stockholm Sweden, 1: 609–12.
  • Gupta, A. 2014. Human hair “waste” and its utilization: Gaps and possibilities. Journal of Waste Management 2014:1–17. doi:10.1155/2014/498018.
  • Hamidi, A., and M. Hooresfand. 2013. Effect of fiber reinforcement on triaxial shear behavior of cement treated sand. Geotextiles and Geomembranes 36:1–9. doi:10.1016/j.geotexmem.2012.10.005.
  • Hejazi, S. M., M. Sheikhzadeh, S. M. Abtahi, and A. Zadhoush. 2012. A simple review of soil reinforcement by using natural and synthetic fibers. Construction and Building Materials 30:100–16. doi:10.1016/j.conbuildmat.2011.11.045.
  • IRC (Indian Road Congress) 37-2012. Guidelines for the design of flexible pavements.
  • IRC (Indian Road Congress) 58-2002. Guidelines for the design of plain jointed rigid pavements for highways.
  • IS (Indian Standard). 1498. 1970. Classification and identification of soils for general engineering purposes.
  • IS (Indian Standard). 2720-3. 1980. Determination of specific gravity.
  • IS (Indian Standard). 2720-4. 1985. Determination of grain size of soil by wet method
  • IS (Indian Standard). 2720-5. 1985. Determination of liquid and plastic limit.
  • IS (Indian Standard). 2720-7. 1980. Determination of water content-dry density relation using light compaction.
  • Islam, M., and K. Iwashita. 2010. Earthquake resistance of adobe reinforced by low cost traditional materials. Journal of Natural Disaster Science 32 (1):1–21. doi:10.2328/jnds.32.1.
  • Jangid, D. 2017. Characterization of Delhi silt reinforced with human hair fibers. M.Tech. Dissertation, IIT Delhi, New Delhi, India.
  • Jiang, H., Y. Cai, and J. Liu. 2010. Engineering properties of soils reinforced by short discrete polypropylene fiber. Journal of Materials in Civil Engineering ASCE 22 (12):1315–22. doi:10.1061/(ASCE)MT.1943-5533.0000129.
  • Kumar, A., B. Walia, and J. Mohan. 2006. Compressive strength of fiber reinforced highly compressible clay. Construction and Building Materials 20 (10):1063–68. doi:10.1016/j.conbuildmat.2005.02.027.
  • Kumar, R., V. K. Kanaujia, and D. Chandra. 1999. Engineering behaviour of fiber reinforced pond ash and silty sand. Geosynthetics International 6 (6):509–18. doi:10.1680/gein.6.0162.
  • Liu, J., G. Wang, T. Kamai, F. Zhang, J. Yang, and B. Shi. 2011. Static liquefaction behavior of saturated fiber-reinforced sand in undrained ring shear tests. Geotextiles and Geomembranes 29 (5):462–71. doi:10.1016/j.geotexmem.2011.03.002.
  • Maher, M. H., and D. H. Gray. 1990. Static response of sand reinforced with randomly distributed fibers. Journal of Geotechnical Engineering, ASCE 116 (11):1661–77. doi:10.1061/(ASCE)0733-9410(1990)116:11(1661).
  • Maher, M. H., and Y. C. Ho. 1994. Mechanical properties of kaolinite/fiber soil composite. Journal of Geotechnical Engineering 120 (8):1381–93. doi:10.1061/(ASCE)0733-9410(1994)120:8(1381).
  • Mattone, R. 2005. Sisal fibre reinforced soil with cement or cactus pulp in bahareque technique. Cement Concrete Composites 27 (5):611–16. doi:10.1016/j.cemconcomp.2004.09.016.
  • Meena, S. K., R. Sahu, and R. Ayothiraman. 2019. Utilization of waste wheat straw fibers for improving the strength characteristics of clay. Journal of Natural Fibers 1–15. doi:10.1080/15440478.2019.1691116.
  • Michalowski, R. L., and J. Cermak. 2003. Triaxial compression of sand reinforced with fibers. Journal of Geotechnical and Geoenvironmental Engineering 129 (2):125–36. doi:10.1061/(ASCE)1090-0241(2003)129:2(125).
  • Murugesan, S. 2004. A study of fibers as a reinforcement for subgrade of flexible pavement. Proceedings of International Conference on Geosynthetics and Geoenvironmental Engineering, Mumbai, India, 163–64.
  • Park, S. 2011. Unconfined compressive strength and ductility of fiber-reinforced cemented sand. Construction and Building Materials 25 (2):1134–38. doi:10.1016/j.conbuildmat.2010.07.017.
  • Peter, L., P. K. Jayasree, K. Balan, and S. A. Raj. 2016. Laboratory investigation in the improvement of subgrade characteristics of expansive soil stabilised with coir waste. Transportation Research Procedia 17:558–66. doi:10.1016/j.trpro.2016.11.110.
  • Pillai, R. R., and R. Ayothiraman 2012. An innovative technique of improving the soil using human hair fibers. Third International Conference on Construction in Developing Countries (ICCIDC–III), Bangkok, Thailand, 428–34.
  • Plé and Lê 2012. Effect of polypropylene fiber-reinforcement on the mechanical behavior of silty clay. Geotextiles and Geomembranes 32: 111–16. doi:10.1016/j.geotexmem.2011.11.004
  • Prabakar, J., and R. S. Sridhar. 2002. Effect of random inclusion of sisal fiber on strength behavior of soil. Construction and Building Materials 16 (2):123–31. doi:10.1016/S0950-0618(02)00008-9.
  • Pradhan, P. K., R. K. Kar, and A. Naik. 2012. Effect of random inclusion of polypropylene fibers on strength characteristics of cohesive soil. Geotechnical and Geological Engineering 30 (1):15–25. doi:10.1007/s10706-011-9445-6.
  • Ramesh, H. N., K. V. M. Krishnan, and H. V. Mamatha. 2010. Compaction and strength behavior of lime-coir fiber treated Black Cotton soil. Geomechanics and Engineering 2 (1):19–28. doi:10.12989/gae.2010.2.1.019.
  • Rao, S. V. K., and A. M. A. Nasr. 2012. Laboratory study on the relative performance of silty-sand soils reinforced with linen fiber. Geotechnical and Geological Engineering 30 (1):63–74. doi:10.1007/s10706-011-9449-2.
  • Robbins, C. R. 2012. The physical properties of hair fibers. In Chemical and physical behavior of human hair, Berlin, Heidelberg: Springer. doi:10.1007/978-3-642-25611-0_9.
  • Robbins C.R. (2012) The Physical Properties of Hair Fibers. In: Chemical and Physical Behavior of Human Hair. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-25611-0_9. 2012.
  • Sadek, S., S. S. Najjar, and F. Freiha. 2010. Shear strength of fiber-reinforced sands. Journal of Geotechnical and Geoenvironmental Engineering 136 (3):490–99. doi:10.1061/(ASCE)GT.1943-5606.0000235.
  • Sahu, R., A. Ramanathan, and G. V. Ramana. 2018. Dynamic response of model footing on reinforced sand. Geotechnical Earthquake Engineering and Soil Dynamics V, ASCE. doi:10.1061/9780784481486.021.
  • Sahu, R., A. Ramanathan, and G. V. Ramana. 2020. dynamic response of model footing on hair fiber-reinforced sand. Geotechnical and Geological Engineering 38 (6):5897–913. doi:10.1007/s10706-020-01401-7.
  • Sahu, R., R. Ayothiraman, and G. V. Ramana 2016. Shear behavior of sand reinforced with human hair fibers. 19th Southeast Asian Geotechnical Conference & 2nd AGSSEA Conference (19SEAGC & 2AGSSEA), Malaysia: Kuala Lumpur, 395–97.
  • Sahu, R., R. Ayothiraman, and G. V. Ramana. 2019. Effect of waste human hair fibers on shear behavior of sand in dry and saturated conditions. Journal of Testing and Evaluation, ASTM 47 (1):153–73. doi:10.1520/JTE20170648.
  • Santoni, R. L., J. S. Tingle, and S. L. Webster. 2001. Engineering properties of sand-fiber mixtures for road construction. Journal of Geotechnical and Geoenvironmental Engineering 127 (3):258–68. doi:10.1061/(ASCE)1090-0241(2001)127:3(258).
  • Shao, W., L. Li, B. Cetin, and Y. Li. 2014. Experimental investigation of mechanical properties of sands reinforced with discrete randomly distributed fiber. Journal of Geotechnical and Geological Engineering 32 (4):901–10. doi:10.1007/s10706-014-9766-3.
  • Sharma, A. 2007. Geotechnical evaluation and numerical modeling of railway tracks on compacted subgrade. Ph.D. thesis, Indian Institute of Technology, India.
  • Singh, H. P. 2013. Effects of coir fiber on CBR value of itnagar soil. International Journal of Current and Engineering and Technology 3(4), 1283-1286.
  • Singh, R. R., and S. Mittal. 2014. Improvement of local subgrade soil for road construction by the use of coconut coir fiber. International Journal of Research in Engineering and Technology, 3(5), 707-711 .
  • Tingle, S., S. Santoni, and L. Webster. 2002. Full-scale field tests of discrete fiber-reinforced sand. Journal of Transportation Engineering, ASCE 128:9–16. doi:10.1061/(ASCE)0733-947X(2002)128:1(9).
  • Usmani, A., G. V. Ramana, and K. G. Sharma. 2011. Experimental evaluation of shear strength behavior of Delhi silt under static loading conditions. Journal of Materials in Civil Engineering 23 (5):533–41. doi:10.1061/(ASCE)MT.1943-5533.0000203.
  • Wilson, A. S., and D. J. Tobin. 2010. Hair after death. In Aging hair, ed. R. M. Trueb and D. J. Tobin, 249–61. Berlin: Springer. doi:10.1007/978-3-642-02636-2_24.
  • Yetimoglu, T., and O. Salbas. 2003. A study on shear strength of sands reinforced with randomly distributed discrete fibers. Geotextiles and Geomembranes 21 (2):103–10. doi:10.1016/S0266-1144(03)00003-7.
  • Yilmaz, Y. 2009. Experimental investigation of the strength properties of sand - clay mixtures reinforced with randomly distributed discrete polypropylene fibers. Geosynthetics International 16 (5):354–63. doi:10.1680/gein.2009.16.5.354.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.