121
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Effects on the interfacial and mechanical properties of reed leaf fibers reinforced agar composites induced by hot water, Na2CO3 solution and ultrasound treatment

, , &

References

  • Ahmad, F., H. S. Choi, and M. K. Park. 2015. A review: natural fiber composites selection in view of mechanical, light weight, and economic properties. Macromolecular Materials and Engineering 300 (1):10–24. doi:10.1002/mame.201400089.
  • Al-Maadeed, M. A., R. Kahraman, P. N. Khanam, and S. Al-Maadeed. 2013. Characterization of untreated and treated male and female date palm leaves. Materials and Design 43:526–531. doi:10.1016/j.matdes.2012.07.028.
  • Azwa, Z. N., B. F. Yousif, A. C. Manalo, and W. Karunasena. 2013. A review on the degradability of polymeric composites based on natural fibres. Materials and Design 47:424–442. doi: 10.1016/j.matdes.2012.11.025
  • Bhargava, N., V. S. Sharanagat, R. S. Mor, and K. Kumar. 2020. Active and intelligent biodegradable packaging films using food and food waste-derived bioactive compounds: a review. Trends in Food Science & Technology 105:385–401. doi:10.1016/j.tifs.2020.09.015.
  • Dasgupta, S., X. Peng, S. Chen, J. Li, M. Du, Y. H. Zhou, G. Zhong, H. Xu, and K. Ta. 2018. Toxic anthropogenic pollutants reach the deepest ocean on Earth. Geochemical Perspectives Letters 7:22–26. doi:10.7185/geochemlet.1814.
  • De-Rosa, I. M., J. M. Kenny, D. Puglia, C. Santulli, and F. Sarasini. 2010. Morphological, thermal and mechanical characterization of okra (Abelmoschus esculentus) fibres as potential reinforcement in polymer composites. Composites Science and Technology 70: 116–122. doi:10.1016/j.compscitech.2009.09.013.
  • Elanthikkal, S., U. Gopalakrishnapanicker, S. Varghese, and J. T. Guthrie. 2010. Cellulose microfibres produced from banana plant wastes: Isolation and characterization. Carbohydrate Polymers 80 (3):852–159. doi: 10.1016/j.carbpol.2009.12.043
  • Ghoshal, G. and D. Singh. 2020. Synthesis and characterization of starch nanocellulosic films incorporated with Eucalyptus globulus leaf extract. International Journal of Food Microbiology 332:1–13. doi:10.1016/j.ijfoodmicro.2020.108765.
  • Gonzalez-Pleiter, M., C. Edo, D. Velazquez, M. C. Casero-Chamorro, F. Leganes, A. Quesada, F. Fernandez-Pinas, and R. Rosal. 2020. First detection of microplastics in the freshwater of an Antarctic Specially Protected Area. Marine Pollution Bulletin 161:1–6. doi: 10.1016/j.marpolbul.2020.111811.
  • Indran, S. and R. E. Raj. 2015. Characterization of new natural cellulosic fiber from Cissus quadrangularis stem. Carbohydrate Polymers 117:392–399. doi: 10.1016/j.carbpol.2014.09.072.
  • Jasbi, M. S., H. Hasani, A. Zadhoush, and S. Safi. 2018. Effect of alkali treatment on mechanical properties of the green composites reinforced with milkweed fibers. Journal of The Textile Institute 109 (1): 24–31. doi:10.1080/00405000.2017.1320816.
  • Jiang, D. M., P. H. An, S. P. Cui, F. Xu, T. F. Tuo, J. Z. Zhang, and H. Jiang. 2018. Effect of leaf fiber modification methods on mechanical and heat-insulating properties of leaf fiber cement-based composite materials. Journal of Building Engineering 19:573–583. doi:10.1016/j.jobe.2018.05.028.
  • Krishnaiah, P., C. T. Ratnam, and S. Manickam. 2017. Enhancements in crystallinity, thermal stability, tensile modulus and strength of sisal fibres and their PP composites induced by the synergistic effects of alkali and high intensity ultrasound (HIU) treatments. Ultrasonics Sonochemistry 34: 729–742. doi:10.1016/j.ultsonch.2016.07.008.
  • Lee, W. K., P. E. Lim, S. M. Phang, P. Namasivayam, and C. L. Ho, 2016. Agar properties of Gracilaria species (Gracilariaceae, Rhodophyta) collected from different natural habitats in Malaysia. Regional Studies In Marine Science 7:123–128. doi:10.1016/j.rsma.2016.06.001.
  • Li, M., X. Tian, R. F. Jin, and D. Li. 2018. Preparation and characterization of nanocomposite films containing starch and cellulose nanofibers. Industrial Crops & Products 13:654–660. doi:10.1016/j.indcrop.2018.07.043.
  • Liu, Y. C., J. Xie, N. Wu, L. D. Wang, Y. H. Ma, and J. Tong. 2019. Influence of silane treatment on the mechanical, tribological and morphological properties of corn stalk fiber reinforced polymer composites. Tribology International 131: 398–405. doi:10.1016/j.triboint.2018.11.004.
  • Ma, Q. Y. and L. J. Wang. 2020. Preparation of a visual pH-sensing film based on tara gum incorporating cellulose and extracts from grape skins. Sensors and Actuators B: Chemical 235:401–407. doi: 10.1016/j.snb.2016.05.107.
  • Mayandi, K., N. Rajini, P. Pitchipoo, J. T. W. Jappes, and A. V. Rajulu. 2018. Properties of untreated and chemically treated cissus quadrangularis natural fibers and their composites with polyester as the matrix. Polymer Composites 39 (3):876–886. doi:10.1002/pc.24011.
  • Mittal, V. and S. Sinha. 2017. Effect of alkali treatment on the thermal properties of wheat straw fiber reinforced epoxy composites. Journal of Composite Materials 51 (3):323–331. doi: 10.1177/0021998316646168.
  • Mostafavi, F. S. and D. Zaeim. 2020. Agar-based edible films for food packaging applications - a review. International Journal of Biological Macromolecules 159:1165–1176. doi:10.1016/j.rsma.2016.06.001.
  • Napper, I. E., B. F. R. Davies, H. Clifford, S. Elvin, H. J. Koldewey, P. A. Mayewski, K. R. Miner, M. Potocki, A. C. Elmore, A. P. Gajurel, et al. 2020. Reaching New Heights in Plastic Pollution—Preliminary Findings of Microplastics on Mount Everest. One Earth 3 (5):621–630. doi: 10.1016/j.oneear.2020.10.020.
  • Ortega-Toro, R., J. Contreras, P. Talens, and A. Chiralt. 2015. Physical and structural properties and thermal behaviour of starch-poly (ɛ-caprolactone) blend films for food packaging. Food Packaging and Shelf Life 5:10–20. doi: 10.1016/j.fpsl.2015.04.001.
  • Orue, A., A. Jauregi, C. Pena-Rodriguez, J. Labidi, A. Eceiza, and A. Arbelaiz. 2015. The effect of surface modifications on sisal fiber properties and sisal/poly (lactic acid) interface adhesion. Composites Part B: Engineering 73:132–138. doi:10.1016/j.compositesb.2014.12.022.
  • Orue, A., A. Jauregi, U. Unsuain, J. Labidi, A. Eceiza, and A. Arbelaiz. 2016. The effect of alkaline and silane treatments on mechanical properties and breakage of sisal fibers and poly (lactic acid)/sisal fiber composites. Composites Part A: Applied Science and Manufacturing 84:186–195. doi:10.1016/j.compositesa.2016.01.021.
  • Rizal, S., Ikramullah, D. A. Gopakumar, S. Thalib, S. Huzni, and H. P. S. A. Khalil. 2018. Interfacial compatibility evaluation on the fiber treatment in the Typha fiber reinforced epoxy composites and their effect on the chemical and mechanical properties. Polymers 10 (12):1316–1329. doi:10.3390/polym10121316.
  • Safri, S. N. A., M. T. H. Sultan, M. Jawaid. and M.K. Jayakrishna. 2018. Composites Part B: Engineering 133: 112-121. doi: 10.1016/j.compositesb.2017.09.008.
  • Sarasini, E. and V. Fiore. 2018. A systematic literature review on less common natural fibres and their biocomposites. Journal of Cleaner Production 195:240–267. doi:10.1016/j.jclepro.2018.05.197.
  • Sepe, R., F. Bollino, L. Boccarusso, and F. Caputo. 2018. Influence of chemical treatments on mechanical properties of hemp fiber reinforced composites. Composites Part B: Engineering 133: 210–217. doi:10.1016/j.compositesb.2017.09.030.
  • Talukder, S., S. K. Mendiratte, R. R. Kumar, R. K. Agrawal, A. Soni, A. Luke, and S. Chand. 2020. Jamun fruit (Syzgium cumini) skin extract based indicator for monitoring chicken patties quality during storage. Journal of Food Science & Technology 57 (2):537–548. doi:10.1007/s13197-019-04084-y.
  • Tischer, P. C. S. F., M. R. Sierakowski, H. Westfahl, and C. A. Tischer. 2010. Nanostructural reorganization of bacterial cellulose by ultrasonic treatment. Biomacromolecules 11 (5):1217–1224. doi:10.1021/bm901383a.
  • Vivek, S. and K. Kanthavel. 2019. Effect of bagasse ash filled epoxy composites reinforced with hybrid plant fibres for mechanical and thermal properties. Composites Part B: Engineering 160:170–176. doi:10.1016/j.compositesb.2018.10.038.
  • Wang, M., C. X. He, X. N. Chang, and D. N. Liu. 2016. Comparison on properties of composites prepared by four kinds of biological glues and wheat straw. Acta Materiae Compositae Sinica 33 (11):2625–2633 (in Chinese). doi:10.13801/j.cnki.fhclxb.20160107.007.
  • Wei, J. and C. Meyer. 2014. Improving degradation resistance of sisal fiber in concrete through fiber surface treatment. Applied Surface Science 289:511–523. doi: 10.1016/j.apsusc.2013.11.024.
  • Yadav, S. K. J., A. Vedrtnam, and D. Gunwant. 2020. Experimental and numerical study on mechanical behavior and resistance to natural weathering of sugarcane leave reinforced polymer composite. Construction and Building Materials 262:1–18. doi:10.1016/j.conbuildmat.2020.120785.
  • Zhang, K. L., T. S. Huang, H. Yan, X. Z. Hu, and T. Ren. 2020. Novel pH-sensitive films based on starch/polyvinyl alcohol and food anthocyanins as a visual indicator of shrimp deterioration. International Journal of Biological Macromolecules 145:768–776. doi: 10.1016/j.ijbiomac.2019.12.159.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.