Mechanical and Dry Sliding Wear Characterization of Marble Dust and Short Kenaf Fiber Reinforced Hybrid Polyester Composites

References

• Akshatha, B. S., and D. T. Gowda. 2015. Effect of various particle sizes of filler on dry sliding wear behavior of fiber reinforced polymer matrix composite. International Journal of Engineering Research and Technology 4 (7):282–86. doi:10.17577/ijertv4is070255.
   Google Scholar
• Azmi, A. M. R., M. T. H. Sultan, M. Jawaid, A. U. M. Shah, A. F. M. Nor, M. S. A. Majid, S. Muhamad, and A. R. A. Talib. 2019. Impact properties of kenaf fibre/X-ray films hybrid composites for structural applications. Journal of Materials Research and Technology 8 (2):1982–90. doi:10.1016/j.jmrt.2018.12.016.
   Google Scholar
• Azwa, Z. N., and B. F. Yousif. 2013. Characteristics of kenaf fibre/epoxy composites subjected to thermal degradation. Polymer Degradation and Stability 98 (12):2752–59. doi:10.1016/j.polymdegradstab.2013.10.008.
   Web of Science ®Google Scholar
• Basavarajappa, S., K. V. Arun, and J. Paulo Davim. 2009. Effect of filler materials on dry sliding wear behavior of polymer matrix composites – A Taguchi approach. Journal of Minerals & Materials Characterization & Engineering 8 (5):379–91. doi:10.1093/eurpub/ckx130.
   Google Scholar
• Begum, K., and M. A. Islam. 2013. Natural fiber as a substitute to synthetic fiber in polymer composites: A review. Research Journal of Engineering Sciences 2 (3):2278–9472. doi:10.13140/RG.2.1.2685.6163.
   Google Scholar
• Biswas, S., and A. Satapathy. 2009. Tribo-performance analysis of red mud filled glass-epoxy composites using Taguchi experimental design. Materials & Design 30 (8):2841–53. doi:10.1016/j.matdes.2009.01.018.
   Web of Science ®Google Scholar
• Biswas, S., and A. Satapathy. 2010. Use of Copper slag in glass-epoxy composites for improved wear resistance. Waste Management and Research 28 (7):615–25. doi:10.1177/0734242X09352260.
   PubMed Web of Science ®Google Scholar
• Chin, C. W., and B. F. Yousif. 2009. Potential of kenaf fibres as reinforcement for tribological applications. Wear 267 (9–10):1550–57. doi:10.1016/j.wear.2009.06.002.
   Web of Science ®Google Scholar
• Chin, D., D. V. Sheng, Y. Musli Nizam Bin, D. Nazli Bin Che, and P. Ong. 2018. Acoustic properties of biodegradable composite micro-perforated panel (BC-MPP) made from kenaf fibre and Polylactic Acid (PLA). Applied Acoustics 138 ((December 2017):179–87. doi:10.1016/j.apacoust.2018.04.009.
   Google Scholar
• El-Tayeb, N. S. M. 2008. A study on the potential of sugarcane fibers/Polyester composite for tribological applications. Wear 265 (1–2):223–35. doi:10.1016/j.wear.2007.10.006.
   Web of Science ®Google Scholar
• Foard, J. H. D., D. Rollason, A. N. Thite, and C. Bell. 2019. Polymer composite Belleville springs for an automotive application. Composite Structures 221 (April):110891. doi:10.1016/j.compstruct.2019.04.063.
   Google Scholar
• Friedrich, K., R. Reinicke, and Z. Zhang. 2002. “Wear of polymer composites.” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 216 (6): 415–26. doi:10.1243/135065002762355334.
   Google Scholar
• Friedrich, K., Z. Zhang, and A. K. Schlarb. 2005. Effects of various fillers on the sliding wear of polymer composites. Composites Science and Technology 65 (15–16):2329–43. doi:10.1016/j.compscitech.2005.05.028.
   Web of Science ®Google Scholar
• Godwin Antony, A., P. Lakshmanan, S. V. Kajendira Kumar, S. Dinesh, K. Rajaguru, and P. Parameswaran. 2019. “Experimental evaluation of hybrid composites by the Cu addition.” In Materials Today: Proceedings, Tiruchirapalli, India, 1–5. doi:10.1016/j.matpr.2019.06.378.
   Google Scholar
• Gupta, G., A. Kumar, R. Tyagi, and S. Kumar. 2016. Application and future of composite materials : A review. International Journal of Innovative Research in Science,Engineering and Technology 5 (5):6907–11. doi:10.15680/IJIRSET.2016.0505041.
   Google Scholar
• Ku, H., H. Wang, N. Pattarachaiyakoop, and M. Trada. 2011. A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B: Engineering 42 (4):856–73. doi:10.1016/j.compositesb.2011.01.010.
   Web of Science ®Google Scholar
• Nayak, S. K., and A. Satapathy. 2019. “Wear analysis of waste marble dust-filled polymer composites with an integrated approach based on design of experiments and neural computation.” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (12):1–11. doi:10.1177/1350650119896170.
   Google Scholar
• Ochi, S. 2008. Mechanical properties of kenaf fibers and kenaf/PLA composites. Mechanics of Materials 40 (4–5):446–52. doi:10.1016/j.mechmat.2007.10.006.
   Web of Science ®Google Scholar
• Padhi, P. K., and A. Satapathy. 2013. Analysis of sliding wear characteristics of BFS filled composites using an experimental design approach integrated with ANN. Tribology Transactions 56 (5):789–96. doi:10.1080/10402004.2013.798448.
   Web of Science ®Google Scholar
• Patnaik, A., A. Satapathy, S. S. Mahapatra, and R. R. Dash. 2009. Modeling and prediction of erosion response of glass reinforced Polyester-Flyash composites. Journal of Reinforced Plastics and Composites 28 (5):513–36. doi:10.1177/0731684407085644.
   Web of Science ®Google Scholar
• Pattanaik, A., M. P. Satapathy, and S. C. Mishra. 2016. Dry sliding wear behavior of Epoxy Fly Ash composite with Taguchi optimization. Engineering Science and Technology, an International Journal 19 (1):710–16. doi:10.1016/j.jestch.2015.07.008.
   Google Scholar
• Phadtare, V. D., V. G. Parale, K. Y. Lee, T. Kim, V. R. Puri, and H. H. Park. 2019. Flexible and lightweight Fe3O4/polymer foam composites for microwave-absorption applications. Journal of Alloys and Compounds 805:120–29. doi:10.1016/j.jallcom.2019.07.048.
   Web of Science ®Google Scholar
• Pihtili, H., and N. Tosun. 2002. Effect of load and speed on the wear behaviour of woven glass fabrics and aramid fibre-reinforced composites. Wear 252 (11–12):979–84. doi:10.1016/S0043-1648(02)00062-5.
   Web of Science ®Google Scholar
• Prashanthakuamr, H. D., and N. Bhanuprakash. 2017. Friction and wear behaviour of polymer matrix composites – A review. International Research Journal of Engineering and Technology 4 (5):988–91. https://www.irjet.net/archives/V4/i5/IRJET-V4I5191.pdf.
   Google Scholar
• Purohit, A., and A. Satapathy. 2017. Development and characterization of Epoxy-based composites filled with Linz-Donawitz sludge. Journal of Composite Materials 51 (7):899–911. doi:10.1177/0021998316656478.
   Web of Science ®Google Scholar
• Reza, M., M. Y. Jamaludin, R. Mohd SamAbdul, and R. Mehdi. 2014. Characteristics of continuous unidirectional kenaf fiber reinforced Epoxy composites. Materials & Design 64:640–49. doi:10.1016/j.matdes.2014.08.010.
   Web of Science ®Google Scholar
• Rout, A. K., and A. Satapathy. 2015. “Study on mechanical and erosion wear performance of granite filled Glass-Epoxy hybrid composites.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 229 (1):38–50. doi:10.1177/1464420713499483.
   Google Scholar
• Santos, T. F. A., G. C. Vasconcelos, W. A. de Souza, M. L. Costa, and E. C. Botelho. 2015. Suitability of Carbon fiber-reinforced polymers as power cable cores: galvanic corrosion and thermal stability evaluation. Materials & Design 65:780–88. doi:10.1016/j.matdes.2014.10.005.
   Web of Science ®Google Scholar
• Selvaruju, S., and S. Ilaiyavel. 2011. Application of composites in marine industry. Journal of Engineering Research and Studies 2 (2):89–91. E-0976-7916.
   Google Scholar
• Shuhimi, F. F., A. Mohd Fadzli Bin, M. A. Kalam, M. Hassan, A. Mustafa, and H. Amiruddin. 2016. Tribological characteristics comparison for oil palm fibre/Epoxy and kenaf fibre/Epoxy composites under dry sliding conditions. Tribology International 101:247–54. doi:10.1016/j.triboint.2016.04.020.
   Web of Science ®Google Scholar
• Singh, G. N., and B. F. Yousif. 2009. “Wear and frictional performance of betelnut fibre-reinforced Polyester composite.” Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223 (2):183–94. doi:10.1243/13506501JET516.
   Google Scholar
• Sonar, T., S. Patil, V. Deshmukh, and R. Acharya. 2015. Natural fiber reinforced polymer composite material-A review. IOSR Journal of Mechanical and Civil Engineering. 142–47. www.iosrjournals.org.
   Google Scholar
• Thakur, V. K., M. K. Thakur, and R. K. Gupta. 2014. Review: raw natural fiber-based polymer composites. International Journal of Polymer Analysis and Characterization 19 (3):256–71. doi:10.1080/1023666X.2014.880016.
   Web of Science ®Google Scholar
• Yadav, R., M. Tirumali, X. Wang, M. Naebe, and B. Kandasubramanian. 2020. Polymer composite for antistatic application in aerospace. Defence Technology 16 (1):107–18. doi:10.1016/j.dt.2019.04.008.
   Web of Science ®Google Scholar
• Yadav, S., Z. Haque, and S. Kumar. 2016. Mechanical and sliding wear behaviour of E-Glass fiber reinforced with Epoxy composites. International Research Journal of Engineering and Technology(IRJET) 3 (5):563–67.
   Google Scholar
• Zainuddin, S., Y. Zanariah, H. Kargarzadeh, I. Ahmad, A. Dufresne, and I. Abdullah. 2012. Potential of using multiscale kenaf fibers as reinforcing filler in cassava starch-kenaf biocomposites. Carbohydrate Polymers 92 (2):2299–305. doi:10.1016/j.carbpol.2012.11.106.
   PubMed Web of Science ®Google Scholar