A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Thermal-Physical Properties, Improvements and Application

References

• Agrawal, R., N. S. Saxena, K. B. Sharma, S. Thomas, and M. S. Sreekala. 2000. Activation energy and crystallization kinetics of untreated and treated oil palm fibre reinforced phenol formaldehyde composites. Materials Science and Engineering: A 277 (1–2):77–82. doi:10.1016/S0921-5093(99)00556-0.
   Web of Science ®Google Scholar
• Ahmad, F., N. Yuvaraj, and P. K. Bajpai. 2021. Influence of reinforcement architecture on static and dynamic mechanical properties of flax/epoxy composites for structural applications. Composite Structures 255. doi:10.1016/j.compstruct.2020.112955.
   Google Scholar
• Al-Hajaj, Z., R. Zdero, and H. Bougherara. 2018. Mechanical, morphological, and water absorption properties of a new hybrid composite material made from 4 harness satin woven carbon fibres and flax fibres in an epoxy matrix. Composites Part A: Applied Science and Manufacturing 115:46–56. doi:10.1016/j.compositesa.2018.09.015.
   Web of Science ®Google Scholar
• Ameur, B., M. A. E. Mahi, J.-L. Rebiere, M. Beyaoui, M. Abdennadher, and M. Haddar. 2021. Experimental fatigue behavior of carbon/flax hybrid composites under tensile loading. Journal of Composite Materials 55 (5):581–96. doi:10.1177/0021998320954903.
   Web of Science ®Google Scholar
• Apolinario, G., P. Ienny, S. Corn, R. Léger, A. Bergeret, and J.-M. Haudin. 2016. Effects of water ageing on the mechanical properties of flax and glass fibre composites: Degradation and reversibility. In Natural fibres: Advances in science and technology towards industrial applications, Sequence number 14. Springer Netherlands.DOI https://doi.org/10.1007/978-94-017-7515-1_14. https://www.springerprofessional.de/en/effects-of-water-ageing-on-the-mechanical-properties-of-flax-and/7464004
   Google Scholar
• Arul, M. M., V. Jayaseelan, D. Jayabalakrishnan, T. Maridurai, S. Selva Kumar, G. Ramesh, and V. R. Arun Prakash. 2020. Low velocity impact and mechanical behaviour of shot blasted SiC wire-mesh and silane-treated aloevera/hemp/flax-reinforced sic whisker modified epoxy resin composites. Silicon 12 (8):1847–56. doi:10.1007/s12633-019-00297-0.
   Web of Science ®Google Scholar
• Arulmurugan, M., A. S. Selvakumar, K. Prabu, and G. Rajamurugan. 2020. Effect of barium sulphate on mechanical, DMA and thermal behaviour of woven aloevera/flax hybrid composites. Bulletin of Materials Science 43 (1). doi: 10.1007/s12034-019-2018-7.
   Google Scholar
• Arun, P. K., V. Arumugaprabu, P. Amuthakkannan, V. Manikandan, and R. D. J. Johnson. 2020. Low velocity impact, compression after impact and morphological studies on flax fiber reinforced with basalt powder filled composites. Materials Research Express 7 (1). doi: 10.1088/2053-1591/ab611e.
   Google Scholar
• Arun Prakash, V. R., and A. Rajadurai. 2016. MECHANICAL, THERMAL AND DIELECTRIC CHARACTERIZATION OF IRON OXIDE PARTICLES DISPERSED GLASS FIBER EPOXY RESIN HYBRID COMPOSITE. Digest Journal of Nanomaterials & Biostructures (DJNB) Vol. 11 Issue 2, p373-380. e–2016 https://chalcogen.ro/index.php/journals/digest-journal-of-nanomaterials-and-biostructures/8-djnb/384-volume-11-number-2-april-jun
   Web of Science ®Google Scholar
• Assarar, M., W. Zouari, H. Sabhi, R. Ayad, and J. M. Berthelot. 2015. Evaluation of the damping of hybrid carbon-flax reinforced composites. Composite Structures 132:148–54. doi:10.1016/j.compstruct.2015.05.016.
   Web of Science ®Google Scholar
• Bachtiar, E. V., K. Kurkowiak, L. Yan, B. Kasal, and T. Kolb. 2019. Thermal stability, fire performance, and mechanical properties of natural fibre fabric-reinforced polymer composites with different fire retardants. Polymers 11 (4):699. doi:10.3390/polym11040699.
   PubMed Web of Science ®Google Scholar
• Ben Ameur, M., A. E. Mahi, J.-L. Rebiere, M. Abdennadher, and M. Haddar. 2018. Damping analysis of unidirectional carbon/flax fiber hybrid composites. International Journal of Applied Mechanics 10 (5):1850050. doi:10.1142/s1758825118500503.
   Web of Science ®Google Scholar
• Benkhelladi, A., H. Laouici, and A. Bouchoucha. 2020. Tensile and flexural properties of polymer composites reinforced by flax, jute and sisal fibres. International Journal of Advanced Manufacturing Technology 108 (3):895–916. doi:10.1007/s00170-020-05427-2.
   Web of Science ®Google Scholar
• Bert, C. W., and R. R. Clary. 1974. “Evaluation of Experimental Methods for Determining Dynamic Stiffness and Damping of Composite Materials.” In, edited by C. A. Berg, F. J. McGarry and S. Y. Elliott, 250–65. West Conshohocken, PA: ASTM International.P35493S https://doi.org/10.1520/ST
   Google Scholar
• Bisanda, E. T. N., and M. P. Ansell. 1991. The effect of silane treatment on the mechanical and physical properties of sisal-epoxy composites. Composites Science and Technology 41 (2):165–78. doi:10.1016/0266-3538(91)90026-L.
   Web of Science ®Google Scholar
• Cadu, T., L. Van Schoors, O. Sicot, S. Moscardelli, L. Divet, and S. Fontaine. 2019. Cyclic hygrothermal ageing of flax fibers’ bundles and unidirectional flax/epoxy composite. Are bio-based reinforced composites so sensitive? Industrial Crops and Products 141:111730. doi:10.1016/j.indcrop.2019.111730.
   Web of Science ®Google Scholar
• Calabrese, L., V. Fiore, T. Scalici, and A. Valenza. 2019. Experimental assessment of the improved properties during aging of flax/glass hybrid composite laminates for marine applications. Journal of Applied Polymer Science 136 (14). doi: 10.1002/app.47203.
   Web of Science ®Google Scholar
• Campana, C., R. Leger, R. Sonnier, L. Ferry, and P. Ienny. 2018. Effect of post curing temperature on mechanical properties of a flax fiber reinforced epoxy composite. Composites Part a-Applied Science and Manufacturing 107:171–79. doi:10.1016/j.compositesa.2017.12.029.
   Web of Science ®Google Scholar
• Čatić, I. 2012. Technical books: Flax and Hemp fi bres: A natural solution for the composite industry. Polimeri: Časopis Za Plastiku I Gumu 33 (1):47–48.
   Google Scholar
• Carus, M. 2011. Bio-composites: Technologies, applications and markets. Proceedings of the 4th International Conference on Sustainable Materials, Polymers and Composites, Birmingham, UK (2011), pp. 6–7
   Google Scholar
• Chandra, R., S. P. Singh, and K. L. Gupta. 1999. Damping studies in fiber-reinforced composites–a review. Composite Structures 46 (1):41–51. doi:10.1016/S0263-8223(99)00041-0.
   Web of Science ®Google Scholar
• Chandrasekar, M., R. M. Shahroze, M. R. Ishak, N. Saba, M. Jawaid, K. Senthilkumar, T. S. M. Kumar, and S. Siengchin. 2019. Flax and sugar palm reinforced epoxy composites: Effect of hybridization on physical, mechanical, morphological and dynamic mechanical properties. Materials Research Express 6 (10):105331. doi:10.1088/2053-1591/ab382c.
   Web of Science ®Google Scholar
• Chang, L. N., and W. S. Chow. 2010. Accelerated weathering on glass fiber/epoxy/organo-montmorillonite nanocomposites. Journal of Composite Materials 44 (12):1421–34. doi:10.1177/0021998309360944.
   Web of Science ®Google Scholar
• Chaudhary, V., P. K. Bajpai, and S. Maheshwari. 2018. An investigation on wear and dynamic mechanical behavior of jute/hemp/flax reinforced composites and its hybrids for tribological applications. Fibers and Polymers 19 (2):403–15. doi:10.1007/s12221-018-7759-6.
   Web of Science ®Google Scholar
• Cheour, K., M. Assarar, D. Scida, R. Ayad, and X.-L. Gong. 2020. Long-term immersion in water of flax-glass fibre hybrid composites: Effect of stacking sequence on the mechanical and damping properties. Fibers and Polymers 21 (1):162–69. doi:10.1007/s12221-020-9494-7.
   Web of Science ®Google Scholar
• Chilali, A., M. Assarar, W. Zouari, H. Kebir, and R. Ayad. 2017. Effect of geometric dimensions and fibre orientation on 3D moisture diffusion in flax fibre reinforced thermoplastic and thermosetting composites. Composites Part A: Applied Science and Manufacturing 95:75–86. doi:10.1016/j.compositesa.2016.12.020.
   Web of Science ®Google Scholar
• Chilali, A., M. Assarar, W. Zouari, H. Kebir, and R. Ayad. 2018a. Analysis of the hydro-mechanical behaviour of flax fibre-reinforced composites: Assessment of hygroscopic expansion and its impact on internal stress. Composite Structures 206:177–84. doi:10.1016/j.compstruct.2018.08.037.
   Web of Science ®Google Scholar
• Chilali, A., W. Zouari, M. Assarar, H. Kebir, and R. Ayad. 2018b. Effect of water ageing on the load-unload cyclic behaviour of flax fibre-reinforced thermoplastic and thermosetting composites. Composite Structures 183:309–19. doi:10.1016/j.compstruct.2017.03.077.
   Web of Science ®Google Scholar
• De Rosa, I., C. S. Maria, and F. Sarasini. 2010. Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers. Materials & Design (1980-2015) 31 (5):2397–405. doi:10.1016/j.matdes.2009.11.059.
   Web of Science ®Google Scholar
• Deng, Y., Y. Guo, W. Peng, and G. Ingarao. 2019. Optimal design of flax fiber reinforced polymer composite as a lightweight component for automobiles from a life cycle assessment perspective. Journal of Industrial Ecology 23 (4):986–97. doi:10.1111/jiec.12836.
   Web of Science ®Google Scholar
• Dong, C. 2018. Review of natural fibre-reinforced hybrid composites. Journal of Reinforced Plastics and Composites 37 (5):331–48. doi:10.1177/0731684417745368.
   Web of Science ®Google Scholar
• Duc, F., P. E. Bourban, C. J. G. Plummer, and J. A. E. Manson. 2014. Damping of thermoset and thermoplastic flax fibre composites. Composites Part a-Applied Science and Manufacturing 64:115–23. doi:10.1016/j.compositesa.2014.04.016.
   Web of Science ®Google Scholar
• Dujardin, N., M. Fois, M. Grimau, and C. Poilane. 2018. Soft interface dynamics in flax-fabrics/epoxy composites. Composite Structures 202:389–96. doi:10.1016/j.compstruct.2018.02.038.
   Web of Science ®Google Scholar
• Fathi, B., M. Foruzanmehr, S. Elkoun, and M. Robert. 2019. Novel approach for silane treatment of flax fiber to improve the interfacial adhesion in flax/bio epoxy composites. Journal of Composite Materials 53 (16):2229–38. doi:10.1177/0021998318824643.
   Web of Science ®Google Scholar
• Fenta Aynalem, G., B. Sirahbizu, and J. A. F. De Oliveira Correia. 2021. Effect of Al2O3 on the tensile and impact strength of flax/unsaturated polyester composite with emphasis on automobile body applications. Advances in Materials Science and Engineering 2021:1–9. doi:10.1155/2021/6641029.
   Web of Science ®Google Scholar
• Fernández, J. A., N. Le Moigne, A. S. Caro-Bretelle, R. El Hage, A. Le Duc, M. Lozachmeur, P. Bono, and A. Bergeret. 2016. Role of flax cell wall components on the microstructure and transverse mechanical behaviour of flax fabrics reinforced epoxy biocomposites. Industrial Crops and Products 85:93–108. doi:10.1016/j.indcrop.2016.02.047.
   Web of Science ®Google Scholar
• Fiore, V., C. Sanfilippo, and L. Calabrese. 2019. Influence of sodium bicarbonate treatment on the aging resistance of natural fiber reinforced polymer composites under marine environment. Polymer Testing 80. doi:10.1016/j.polymertesting.2019.106100.
   Google Scholar
• Fiore, V., C. Sanfilippo, and L. Calabrese. 2020. Dynamic mechanical behavior analysis of flax/jute fiber-reinforced composites under salt-fog spray environment. Polymers 12 (3):716. doi:10.3390/polym12030716.
   Web of Science ®Google Scholar
• Fiore, V., L. Calabrese, G. Di Bella, T. Scalici, G. Galtieri, A. Valenza, and E. Proverbio. 2016a. Effects of aging in salt spray conditions on flax and flax/basalt reinforced composites: Wettability and dynamic mechanical properties. Composites Part B-Engineering 93:35–42. doi:10.1016/j.compositesb.2016.02.057.
   Web of Science ®Google Scholar
• Fiore, V., T. Scalici, and A. Valenza. 2018. Effect of sodium bicarbonate treatment on mechanical properties of flax-reinforced epoxy composite materials. Journal of Composite Materials 52 (8):1061–72. doi:10.1177/0021998317720009.
   Web of Science ®Google Scholar
• Fiore, V., T. Scalici, L. Calabrese, A. Valenza, and E. Proverbio. 2016b. Effect of external basalt layers on durability behaviour of flax reinforced composites. Composites Part B: Engineering 84:258–65. doi:10.1016/j.compositesb.2015.08.087.
   Web of Science ®Google Scholar
• Firouzsalari, S. E., D. Dizhur, K. Jayaraman, and J. Ingham. 2021. Experimental study of flax fabric-reinforced epoxy pipes subjected to internal pressure. Composites Part a-Applied Science and Manufacturing 147. doi:10.1016/j.compositesa.2021.106445.
   Google Scholar
• Firouzsalari, S. E., D. Dizhur, K. Jayaraman, N. Chouw, and J. M. Ingham. 2020. Flax fabric-reinforced epoxy pipes subjected to lateral compression. Composite Structures 244:112307. doi:10.1016/j.compstruct.2020.112307.
   Web of Science ®Google Scholar
• Herrera‐Franco, P. J., and J. A. Manuel De. 1997. Effect of fiber treatment on the mechanical properties of LDPE‐henequen cellulosic fiber composites. Journal of Applied Polymer Science 65 (1):197–207.
   Web of Science ®Google Scholar
• Hosur, M., H. Maroju, and S. Jeelani. 2015. Comparison of effects of alkali treatment on flax fibre reinforced polyester and polyester-biopolymer blend resins. Polymers and Polymer Composites 23 (4):229–42. doi:10.1177/096739111502300404.
   Web of Science ®Google Scholar
• Hu, J., S. Yin, T. X. Yu, and X. Jun. 2018. Dynamic compressive behavior of woven flax-epoxy-laminated composites. International Journal of Impact Engineering 117:63–74. doi:10.1016/j.ijimpeng.2018.03.004.
   Web of Science ®Google Scholar
• Huner, U. 2018. Effect of chemical surface treatment on flax-reinforced epoxy composite. Journal of Natural Fibers 15 (6):808–21. doi:10.1080/15440478.2017.1369207.
   Web of Science ®Google Scholar
• Ismail, K. I., M. T. H. Sultan, A. U. M. Shah, M. Jawaid, and S. N. A. Safri. 2019. Low velocity impact and compression after impact properties of hybrid bio-composites modified with multi-walled carbon nanotubes. Composites Part B: Engineering 163:455–63. doi:10.1016/j.compositesb.2019.01.026.
   Web of Science ®Google Scholar
• Jeannin, T., M. Berges, X. Gabrion, R. Léger, V. Person, S. Corn, B. Piezel, P. Ienny, S. Fontaine, and V. Placet. 2019. Influence of hydrothermal ageing on the fatigue behaviour of a unidirectional flax-epoxy laminate. Composites Part B: Engineering 174:107056. doi:10.1016/j.compositesb.2019.107056.
   Web of Science ®Google Scholar
• John, M. J., R. Tlili, R. D. Anandjiwala, A. Boudenne, and L. Ibos. 2012. Effect of amphiphilic coupling agent on heat flow and dielectric properties of flax–polypropylene composites. Composites Part B: Engineering 43 (2):526–32. doi:10.1016/j.compositesb.2011.11.016.
   Web of Science ®Google Scholar
• Kabir, H., M. A. Gafur, F. Ahmed, F. Begum, and M. R. Qadir. 2014. Investigation of physical and mechanical properties of bamboo fiber and PVC foam sheet composites. Universal Journal of Materials Science 2 (6):119–24. doi:10.13189/ujms.2014.020603.
   Google Scholar
• Kabir, M. M., H. Wang, K. T. Lau, and F. Cardona. 2012. Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview. Composites Part B: Engineering 43 (7):2883–92. doi:10.1016/j.compositesb.2012.04.053.
   Web of Science ®Google Scholar
• Kamaraj, M., E. Anush Dodson, and S. Datta. 2020. Effect of graphene on the properties of flax fabric reinforced epoxy composites. Advanced Composite Materials 29 (5):443–58. doi:10.1080/09243046.2019.1709679.
   Web of Science ®Google Scholar
• Kollia, A., L. C. Kontaxis, G. C. Papanicolaou, and S. P. Zaoutsos. 2020. Effect of thermal shock cycling on the quasi‐static and dynamic flexural properties of flax fabric‐epoxy matrix laminates. Journal of Applied Polymer Science 137 (14):48529. doi:10.1002/app.48529.
   Web of Science ®Google Scholar
• Lakes, R. S. 2002. High damping composite materials: Effect of structural hierarchy. Journal of Composite Materials 36 (3):287–97. doi:10.1177/0021998302036003538.
   Web of Science ®Google Scholar
• Le Guen, M., R. H. Joo, A. F. Newman, G. W. Emms, and M. P. Staiger. 2016. The damping–modulus relationship in flax–carbon fibre hybrid composites. Composites Part B: Engineering 89:27–33. doi:10.1016/j.compositesb.2015.10.046.
   Web of Science ®Google Scholar
• Liotier, P.-J., M. F. Pucci, A. Le Duigou, A. Kervoelen, J. Tirilló, F. Sarasini, and S. Drapier. 2019. Role of interface formation versus fibres properties in the mechanical behaviour of bio-based composites manufactured by liquid composite molding processes. Composites Part B: Engineering 163:86–95. doi:10.1016/j.compositesb.2018.10.103.
   Web of Science ®Google Scholar
• Mahmoudi, S., A. Kervoelen, G. Robin, L. Duigou, E. M. Daya, and J. M. Cadou. 2019. Experimental and numerical investigation of the damping of flax–epoxy composite plates. Composite Structures 208:426–33. doi:10.1016/j.compstruct.2018.10.030.
   Web of Science ®Google Scholar
• Mak, K., and A. Fam. 2020. The effect of wet-dry cycles on tensile properties of unidirectional flax fiber reinforced polymers. Composites Part B-Engineering 183. doi:10.1016/j.compositesb.2019.107645.
   Google Scholar
• Mak, K., and A. Fam. 2021. Performance of SiO2-impregnated flax fibre reinforced polymers under wet dry and freeze thaw cycles. Journal of Composite Materials 55 (2):251–63. doi:10.1177/0021998320946811.
   Web of Science ®Google Scholar
• Malik, K., F. Ahmad, and E. Gunister. 2021a. Drilling performance of natural fiber reinforced polymer composites: A review. Journal of Natural Fibers 1–19. doi:10.1080/15440478.2020.1870624.
   Google Scholar
• Malik, K., F. Ahmad, and E. Gunister. 2021b. A review on the Kenaf fiber reinforced thermoset composites. Applied Composite Materials 28 (2):491–528. doi:10.1007/s10443-021-09871-5.
   Web of Science ®Google Scholar
• Manteghi, S., Z. Mahboob, Z. Fawaz, and H. Bougherara. 2017. Investigation of the mechanical properties and failure modes of hybrid natural fiber composites for potential bone fracture fixation plates. Journal of the Mechanical Behavior of Biomedical Materials 65:306–16. doi:10.1016/j.jmbbm.2016.08.035.
   PubMed Web of Science ®Google Scholar
• Matykiewicz, D., and M. Barczewski. 2020. On the impact of flax fibers as an internal layer on the properties of basalt-epoxy composites modified with silanized basalt powder. Composites Communications 20:8. doi:10.1016/j.coco.2020.100360.
   Web of Science ®Google Scholar
• Matykiewicz, D., M. Barczewski, O. Mysiukiewicz, and K. Skórczewska. 2019. Comparison of various chemical treatments efficiency in relation to the properties of flax, hemp fibers and cotton trichomes. Journal of Natural Fibers 1–17. doi:10.1080/15440478.2019.1645792.
   Web of Science ®Google Scholar
• Matykiewicz, D., and O. Mysiukiewicz. 2020. Epoxy composites reinforced with natural fillers such as flax fiber and linseed cakes (Rapid communication). Polimery 65 (11–12):828–32. doi:10.14314/polimery.2020.11.11.
   Web of Science ®Google Scholar
• Meenakshi, C. M., and A. Krishnamoorthy. 2019. Study on the effect of surface modification on the mechanical and thermal behaviour of flax, sisal and glass fiber-reinforced epoxy hybrid composites. Journal of Renewable Materials 7 (2):153–69. doi:10.32604/jrm.2019.00046.
   Web of Science ®Google Scholar
• Menard, K. P. 1999. An introduction to dynamic mechanical analysis. Dynamic Mechanical Analysis: A Practical Introduction 2:3–10.
   Google Scholar
• Mishra, R., J. Wiener, J. Militky, M. Petru, B. Tomkova, and J. Novotna. 2020. Bio-Composites reinforced with natural fibers: Comparative analysis of thermal, static and dynamic-mechanical properties. Fibers and Polymers 21 (3):619–27. doi:10.1007/s12221-020-9804-0.
   Web of Science ®Google Scholar
• Mohan, K., and T. Rajmohan. 2018. Effects of MWCNT on mechanical properties of glass-flax fiber reinforced nano composites. Materials Today-Proceedings 5 (5):11628–35. doi:10.1016/j.matpr.2018.02.133.
   Google Scholar
• Mohd, A., N. Saba, M. Jawaid, M. Nasir, M. Pervaiz, and Y. Alothman Othman. 2018. A Review on Phenolic Resin and its Composites. Current Analytical Chemistry 14 (3):185–97. doi:http://doi.org/10.2174/1573411013666171003154410.
   Web of Science ®Google Scholar
• Morissa Lu, M., and A. W. Van Vuure. 2019. Improving moisture durability of flax fibre composites by using non-dry fibres. Composites Part a-Applied Science and Manufacturing 123:301–09. doi:10.1016/j.compositesa.2019.05.029.
   Web of Science ®Google Scholar
• Motoc, D. L., S. F. Bou, and R. Balart. 2018. Thermal properties comparison of hybrid CF/FF and BF/FF cyanate ester-based composites. Journal of Thermal Analysis and Calorimetry 133 (1):509–18. doi:10.1007/s10973-018-7222-y.
   Web of Science ®Google Scholar
• Moudood, A., A. Rahman, H. M. Khanlou, W. Hall, A. Öchsner, and G. Francucci. 2019b. Environmental effects on the durability and the mechanical performance of flax fiber/bio-epoxy composites. Composites Part B: Engineering 171:284–93. doi:10.1016/j.compositesb.2019.05.032.
   Web of Science ®Google Scholar
• Moudood, A., W. Hall, A. Ochsner, L. Huaizhong, A. Rahman, and G. Francucci. 2019a. Effect of moisture in flax fibres on the quality of their composites. Journal of Natural Fibers 16 (2):209–24. doi:10.1080/15440478.2017.1414651.
   Web of Science ®Google Scholar
• Muhammed, H. C. V., M. A. Joseph, and V. Prasad. 2020. Recent developments in flax fiber reinforced composites and its applications. In Thomas, P.C., Mathai, V.J., & Titus, G. (Eds.). (2020). Emerging Technologies for Sustainability: Proceedings of the Annual International Conference on Emerging Research Areas (AICERA 2019), July 18–20, 2019, Kottayam, Kerala (1st ed.).CRC Press. page 623–30. ttps://doi.org/10.1201/9780429353628
   Google Scholar
• Mukherjee, P. S., and K. G. Satyanarayana. 1986. Structure and properties of some vegetable fibres. Journal of Materials Science 21 (1):51–56. doi:10.1007/BF01144698.
   Web of Science ®Google Scholar
• Munoz, E., and J. A. García-Manrique. 2015. Water Absorption Behaviour and Its Effect on the Mechanical Properties of Flax Fibre Reinforced Bioepoxy Composites. International Journal of Polymer Science 2015:390275. doi:10.1155/2015/390275
   Google Scholar
• Nayak, R. K., K. K. Mahato, and B. C. Ray. 2016. Water absorption behavior, mechanical and thermal properties of nano TiO2 enhanced glass fiber reinforced polymer composites. Composites Part A: Applied Science and Manufacturing 90:736–47. doi:10.1016/j.compositesa.2016.09.003.
   Web of Science ®Google Scholar
• Pandian, A., M. Vairavan, J. Thangaiah, W. Jappes, and M. Uthayakumar. 2014. Effect of moisture absorption behavior on mechanical properties of basalt fibre reinforced polymer matrix composites. Journal of Composites 2014:1–8. doi:10.1155/2014/587980.
   Google Scholar
• Panwar, V., and Pal, K. 2017. “Chapter 12 - Dynamic Mechanical Analysis of Clay–Polymer Nanocomposites.” In Clay-Polymer Nanocomposites, edited by Khouloud Jlassi, Mohamed M. Chehimi and Sabu Thomas, 413–41. Elsevier. https://doi.org/10.1016/B978-0-323-46153-5.00012-4.
   Google Scholar
• Peijs, A. A. J. M., H. G. H. Van Melick, S. K. Garkhail, G. T. Pott, and C. A. Baillie. 1998. Natural-fibre-mat-reinforced thermoplastics based on upgraded flax fibres for improved moisture resistance. Paper presented at the Proc. of the 8th Europ. Conf. on Composite Materials (ECCM-8), Science, Technology and Applications, 2.Naples (Italy); 1998. p. 119–26
   Google Scholar
• Perremans, D., I. Verpoest, C. Dupont-Gillain, and A. W. Van Vuure. 2018. Investigation of the tensile behavior of treated flax fibre bio-composites at ambient humidity. Composites Science and Technology 159:119–26. doi:10.1016/j.compscitech.2018.02.038.
   Web of Science ®Google Scholar
• Pil, L., F. Bensadoun, J. Pariset, and I. Verpoest. 2016. Why are designers fascinated by flax and hemp fibre composites? Composites Part A: Applied Science and Manufacturing 83:193–205. doi:10.1016/j.compositesa.2015.11.004.
   Web of Science ®Google Scholar
• Pisupati, A., A. Ayadi, M. Deleglise-Lagardere, and C. H. Park. 2019. Influence of resin curing cycle on the characterization of the tensile properties of flax fibers by impregnated fiber bundle test. Composites Part a-Applied Science and Manufacturing 126. doi:10.1016/j.compositesa.2019.105572.
   Google Scholar
• Pisupati, A., L. Bonnaud, M. Deléglise-Lagardère, and C. H. Park. 2021. Influence of environmental conditions on the mechanical properties of flax fiber reinforced thermoset composites. Applied Composite Materials 28 (3):633–49. doi:10.1007/s10443-021-09885-z.
   Web of Science ®Google Scholar
• Prasad, V., K. Sekar, and M. A. Joseph. 2021. Mechanical and water absorption properties of nano TiO2 coated flax fibre epoxy composites. Construction and Building Materials 284:122803. doi:10.1016/j.conbuildmat.2021.122803.
   Web of Science ®Google Scholar
• Prasad, V., K. Sekar, S. Varghese, and M. A. Joseph. 2019. Enhancing Mode I and Mode II interlaminar fracture toughness of flax fibre reinforced epoxy composites with nano TiO2. Composites Part A: Applied Science and Manufacturing 124:105505. doi:10.1016/j.compositesa.2019.105505.
   Web of Science ®Google Scholar
• Prasad, V., M. A. Deepak Suresh, J. K. Sekar, M. Ali, and M. Ali. 2018. Development of flax fibre reinforced epoxy composite with nano Tio(2) addition into matrix to enhance mechanical properties. Materials Today-Proceedings 5 (5):11569–75. doi:10.1016/j.matpr.2018.02.125.
   Google Scholar
• Prasad, V. M., A. Joseph, and K. Sekar. 2018. Investigation of mechanical, thermal and water absorption properties of flax fibre reinforced epoxy composite with nano TiO2 addition. Composites Part a-Applied Science and Manufacturing 115:360–70. doi:10.1016/j.compositesa.2018.09.031.
   Web of Science ®Google Scholar
• Rajaei, M., N. K. Kim, and D. Bhattacharyya. 2018. Effects of heat-induced damage on impact performance of epoxy laminates with glass and flax fibres. Composite Structures 185:515–23. doi:10.1016/j.compstruct.2017.11.053.
   Web of Science ®Google Scholar
• Ramamoorthy, S. K., Q. Di, K. Adekunle, and M. Skrifvars. 2012. Effect of water absorption on mechanical properties of soybean oil thermosets reinforced with natural fibers. Journal of Reinforced Plastics and Composites 31 (18):1191–200. doi:10.1177/0731684412455257.
   Web of Science ®Google Scholar
• Ramesh, M. 2019. Flax (Linum usitatissimum L.) fibre reinforced polymer composite materials: A review on preparation, properties and prospects. Progress in Materials Science 102:109–66.
   Web of Science ®Google Scholar
• Rasyid, M. F., M. S. Ahmad, H. M. Salim, A. J. Karger-Kocsis, and Z. A. Mohd Ishak. 2019. Non-woven flax fibre reinforced acrylic based polyester composites: The effect of sodium silicate on mechanical, flammability and acoustic properties. Express Polymer Letters 13 (6):553–64. doi:10.3144/expresspolymlett.2019.47.
   Web of Science ®Google Scholar
• Reux, F., and I. Verpoest. 2012. Flax and hemp fibres: A natural solution for the composite industry. Paris, France: JEC Composites
   Google Scholar
• Rouibah, H., M. Kenane, and I. Daoud. 2020. Influence of fabric properties, hybridization, and thermal aging on properties of flax/jute fibres reinforced epoxy hybrid composites. Indian Journal of Fibre & Textile Research 45 (4):426–35.
   Web of Science ®Google Scholar
• Rouison, D., M. Couturier, M. Sain, B. MacMillan, and B. J. Balcom. 2005. Water absorption of hemp fiber/unsaturated polyester composites. Polymer Composites 26 (4):509–25. doi:10.1002/pc.20114.
   Web of Science ®Google Scholar
• Saha, A., S. Kumar, and D. Zindani. 2021. Investigation of the effect of water absorption on thermomechanical and viscoelastic properties of flax-hemp-reinforced hybrid composite. Polymer Composites 42 (9):4497–516. doi:10.1002/pc.26164.
   Web of Science ®Google Scholar
• Salasinska, K., M. Barczewski, J. Anisko, A. Hejna, and M. Celinski. 2021. Comparative study of the reinforcement type effect on the thermomechanical properties and burning of epoxy-based composites. Journal of Composites Science 5 (3):19. doi:10.3390/jcs5030089.
   Google Scholar
• Selver, E., N. Ucar, and T. Gulmez. 2018. Effect of stacking sequence on tensile, flexural and thermomechanical properties of hybrid flax/glass and jute/glass thermoset composites. Journal of Industrial Textiles 48 (2):494–520. doi:10.1177/1528083717736102.
   Web of Science ®Google Scholar
• Sherief, Z., G. Xian, S. Thomas, and A. Ajith. 2017. Effects of surface grafting of copper nanoparticles on the tensile and bonding properties of flax fibers. Science and Engineering of Composite Materials 24 (5):651–60. doi:10.1515/secm-2014-0462.
   Web of Science ®Google Scholar
• Sodoke, F. K., L. Toubal, and L. Laperriere. 2019. Wetting/drying cyclic effects on mechanical and physicochemical properties of quasi-isotopic flax/epoxy composites. Polymer Degradation and Stability 161:121–30. doi:10.1016/j.polymdegradstab.2019.01.014.
   Web of Science ®Google Scholar
• Standard, A. S. T. M. 2012. “ASTM D4065: Standard practice for plastics: dynamic mechanical properties: Determination and report of procedures.” United States.
   Google Scholar
• Standard, A. S. T. M. 2017. “ASTM E756-05(2017), standard test method for measuring vibration-damping properties of materials.” ASTM International, West Conshohocken, PA.
   Google Scholar
• Sumesh, K. R., K. Kanthavel, and V. Kavimani. 2020. Peanut oil cake-derived cellulose fiber: Extraction, application of mechanical and thermal properties in pineapple/flax natural fiber composites. International Journal of Biological Macromolecules 150:775–85. doi:10.1016/j.ijbiomac.2020.02.118.
   PubMed Web of Science ®Google Scholar
• Vinu Kumar, S. M., K. L. Senthil Kumar, H. Siddhi Jailani, and G. Rajamurugan. 2020. Mechanical, DMA and Sound Acoustic behaviour of Flax woven fabric reinforced Epoxy composites. Materials Research Express 7 (8):085302. doi:10.1088/2053-1591/abaea5.
   Web of Science ®Google Scholar
• Vivek, S., K. Kanthavel, A. Torris, and V. Kavimani. 2020. Effect of bio-filler on hybrid Sisal-Banana-Kenaf-Flax based epoxy composites: A statistical correlation on flexural strength. Journal of Bionic Engineering 17 (6):1263–71. doi:10.1007/s42235-020-0083-7.
   Web of Science ®Google Scholar
• Wang, A., D. Xia, G. Xian, and L. Hui. 2019a. Effect of nanoclay grafting onto flax fibers on the interfacial shear strength and mechanical properties of flax/epoxy composites. Polymer Composites 40 (9):3482–92. doi:10.1002/pc.25210.
   Web of Science ®Google Scholar
• Wang, A., X. Wang, and G. Xian. 2020. Mechanical, low-velocity impact, and hydrothermal aging properties of flax/carbon hybrid composite plates. Polymer Testing 90. doi:10.1016/j.polymertesting.2020.106759.
   Google Scholar
• Wang, H., L. Yang, H. Guo, Y. Zhao, and J. Zhao. 2019b. Mechanical and thermodynamic properties of unidirectional flax fiber reinforced CNT modified epoxy composites. Fibers and Polymers 20 (6):1266–76. doi:10.1007/s12221-019-8836-9.
   Web of Science ®Google Scholar
• Wang, W., F. Rao, Q. Deng, X. Wang, Y. Wang, Z. Zhang, and G. Xian. 2020. Surface modification of flax fibers with isocyanate and its effects on fiber/epoxy interfacial properties. Fibers and Polymers 21 (12):2888–95. doi:10.1007/s12221-020-9722-1
   Web of Science ®Google Scholar
• Wang, W., X. Zhang, N. Chouw, L. Zhongxian, and Y. Shi. 2018. Strain rate effect on the dynamic tensile behaviour of flax fibre reinforced polymer. Composite Structures 200:135–43. doi:10.1016/j.compstruct.2018.05.109.
   Web of Science ®Google Scholar
• Wang, X., and M. Petru. 2020. Degradation of bending properties of flax fiber reinforced polymer after natural aging and accelerated aging. Construction and Building Materials 240. doi:10.1016/j.conbuildmat.2019.117909.
   Google Scholar
• Wang, X., M. Petru, and L. Xia. 2021. Modeling the dynamics behavior of flax fiber reinforced composite after water aging using a modified Huet-Sayegh viscoelastic model with fractional derivatives. Construction and Building Materials 290. doi:10.1016/j.conbuildmat.2021.122879.
   Google Scholar
• Wang, X., M. Petru, and Y. Hang. 2019. The effect of surface treatment on the creep behavior of flax fiber reinforced composites under hygrothermal aging conditions. Construction and Building Materials 208:220–27. doi:10.1016/j.conbuildmat.2019.03.001.
   Web of Science ®Google Scholar
• Wu, C. G., K. Yang, Y. Z. Gu, J. Xu, R. O. Ritchie, and J. Guan. 2019. Mechanical properties and impact performance of silk-epoxy resin composites modulated by flax fibres. Composites Part a-Applied Science and Manufacturing 117:357–68. doi:10.1016/j.compositesa.2018.12.003.
   Web of Science ®Google Scholar
• Yan, L., N. Chouw, and X. Yuan. 2012. Improving the mechanical properties of natural fibre fabric reinforced epoxy composites by alkali treatment. Journal of Reinforced Plastics and Composites 31 (6):425–37. doi:10.1177/0731684412439494.
   Web of Science ®Google Scholar
• Yan, W., H. Riahi, K. Benzarti, R. Chlela, L. Curtil, and D. Bigaud. 2021. Durability and reliability estimation of flax fiber reinforced composites using tweedie exponential dispersion degradation process. Mathematical Problems in Engineering. doi:10.1155/2021/6629637.
   Google Scholar
• Yang, H., R. Yan, H. Chen, D. H. Lee, and C. Zheng. 2007. Characteristics of hemicellulose, cellulose and lignin pyrolysis. Fuel 86 (12–13):1781–88. doi:10.1016/j.fuel.2006.12.013.
   Web of Science ®Google Scholar
• Yu, H., and C. Zhou. 2018. Sandwich diffusion model for moisture absorption of flax/glass fiber reinforced hybrid composite. Composite Structures 188:1–6. doi:10.1016/j.compstruct.2017.12.061.
   Web of Science ®Google Scholar
• Zhu, J., H. Zhu, J. Njuguna, and H. Abhyankar. 2013. Recent development of flax fibres and their reinforced composites based on different polymeric matrices. Materials 6, no. 11: 5171–5198. https://doi.org/10.3390/ma6115171
   Google Scholar