Influence of Date Palm Tree Fibers on the Tensile Fracture Energy of an Epoxy-based Adhesive

References

• Ahmed, F., J. Wolodko, and M. G. Lipsett. 2015. Isotherm moisture absorption kinetics in natural-fiber-reinforced polymer under immersion conditions. Journal of Composite Materials 49 (11):1301–14. doi:10.1177/0021998314533366.
   Web of Science ®Google Scholar
• Akhavan-Safar, A., M. R. Ayatollahi, S. A. Bahreinian, and L. F. M. da Silva. 2019. Application of adhesively bonded single lap joints for fracture assessment of adhesive materials. The Journal of Adhesion 95 (1):1–22. doi:10.1080/00218464.2017.1329656.
   Web of Science ®Google Scholar
• Akhavan-Safar, A., R. Beygi, F. Delzendehrooy, and L. F. M. da Silva. 2021. “Fracture energy assessment of adhesives–Part I: Is GIC an adhesive property? A neural network analysis.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235 ( 6):1461–76.
   Google Scholar
• Akhavan-Safar, A., A. Queirós Barbosa, L. F. M. da Silva, and M. Reza Ayatollahi. 2018. Micro failure analysis of adhesively bonded joints enhanced with natural cork particles: Impact of overlap length and particles volume fraction. Frattura ed Integrità Strutturale 12 (46):266–74. doi:10.3221/IGF-ESIS.46.24.
   Google Scholar
• AL-Oqla, F., M. Othman, Y. Alothman, M. Jawaid, S. M. Sapuan, and M. H. Es-Saheb. 2014. Processing and properties of date palm fibers and its composites. In Biomass and bioenergy, 1–25. UK: Springer, Cham.
   Google Scholar
• Alarifi, I. M. 2021. “Fabrication and characterization of Neem leaves waste material reinforced composites.” Materials Today: Proceedings 47 (2021):5946–54. doi: 10.1016/j.matpr.2021.04.488.
   Google Scholar
• Alawar, A., A. M. Hamed, and K. Al-Kaabi. 2009. Characterization of treated date palm tree fiber as composite reinforcement. Composites Part B: Engineering 40 (7):601–06. doi:10.1016/j.compositesb.2009.04.018.
   Web of Science ®Google Scholar
• Ali, N. G., M. R. Ayatollahi, S. Hengameh Ghaffari, and L. F. M. da Silva. 2018. Effect of reinforcements at different scales on mechanical properties of epoxy adhesives and adhesive joints: A review. The Journal of Adhesion 94 (13):1082–121. doi:10.1080/00218464.2018.1452736.
   Web of Science ®Google Scholar
• Alsaeed, T., B. F. Yousif, and H. Ku. 2013. The potential of using date palm fibres as reinforcement for polymeric composites. Materials & Design 43:177–84. doi:10.1016/j.matdes.2012.06.061.
   Web of Science ®Google Scholar
• Amroune, S., A. Bezazi, A. Dufresne, F. Scarpa, and A. Imad. 2021. Investigation of the date palm fiber for green composites reinforcement: Thermo-physical and mechanical properties of the fiber. Journal of Natural Fibers 18 (5):717–34. doi:10.1080/15440478.2019.1645791.
   Web of Science ®Google Scholar
• Barbosa, A. Q., L. F. M. da Silva, and A. Öchsner. 2014. “Effect of the amount of cork particles on the strength and glass transition temperature of a structural adhesive.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 228 ( 4):323–33.
   Google Scholar
• Biagiotti, J., D. Puglia, and J. M. Kenny. 2004. A review on natural fibre-based composites-part I: Structure, processing and properties of vegetable fibres. Journal of Natural Fibers 1 (2):37–68. doi:10.1300/J395v01n02_04.
   Google Scholar
• Bonhomme, J., A. Argüelles, J. Viña, and I. Viña. 2009. Fractography and failure mechanisms in static mode I and mode II delamination testing of unidirectional carbon reinforced composites. Polymer Testing 28 (6):612–17. doi:10.1016/j.polymertesting.2009.05.003.
   Web of Science ®Google Scholar
• Boumaaza, M., A. Belaadi, and M. Bourchak. 2021. The effect of alkaline treatment on mechanical performance of natural fibers-reinforced plaster: Optimization using RSM. Journal of Natural Fibers 18 (12): 2220–2240.
   Web of Science ®Google Scholar
• Chaves, F. J. P., L. F. M. Da Silva, M. F. S. F. De Moura, D. A. Dillard, and V. H. C. Esteves. 2014. Fracture mechanics tests in adhesively bonded joints: A literature review. The Journal of Adhesion 90 (12):955–92. doi:10.1080/00218464.2013.859075.
   Web of Science ®Google Scholar
• Costa, M., G. Viana, C. Canto, L. F. M. Da Silva, M. D. Banea, F. Chaves, R. D. S. G. Campilho, and A. A. Fernandes. 2016. “Effect of the size reduction on the bulk tensile and double cantilever beam specimens used in cohesive zone models.” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 230 ( 5):968–82.
   Google Scholar
• D-99, ASTM. 1999. Standard test method for fracture strength in cleavage of adhesives in bonded metal joints. Adhesives, USA: American Society for Testing and Materials.
   Google Scholar
• da Silva, L. F. M., A. Öchsner, and R. D. Adams. 2011. Handbook of adhesion technology. UK: Springer, Cham.
   Google Scholar
• Dassios, K. G. 2007. A review of the pull-out mechanism in the fracture of brittle-matrix fibre-reinforced composites. Advanced Composites Letters 16 (1):096369350701600102. doi:10.1177/096369350701600102.
   Web of Science ®Google Scholar
• De Moura, M. F. S. F., R. D. S. G. Campilho, and J. P. M. Gonçalves. 2008. Crack equivalent concept applied to the fracture characterization of bonded joints under pure mode I loading. Composites Science and Technology 68 (10–11):2224–30. doi:10.1016/j.compscitech.2008.04.003.
   Web of Science ®Google Scholar
• Dehury, J., J. Ranjan Mohanty, S. Nayak, P. Samal, S. Kumar Khuntia, C. Malla, S. Darsan Mohanty, and J. Mohapatra. 2021. Comprehensive characterization of date palm petiole fiber reinforced epoxy composites: Effect of fiber treatment and loading on various properties. Journal of Natural Fibers 1–14. doi:10.1080/15440478.2021.1982834.
   Google Scholar
• Delzendehrooy, F., M. R. Ayatollahi, A. Akhavan-Safar, and L. F. M. da Silva. 2020. Strength improvement of adhesively bonded single lap joints with date palm fibers: Effect of type, size, treatment method and density of fibers. Composites Part B: Engineering 188:107874. doi:10.1016/j.compositesb.2020.107874.
   Web of Science ®Google Scholar
• Delzendehrooy, F., R. Beygi, A. Akhavan-Safar, and L. F. M. da Silva. 2021. Fracture energy assessment of adhesives Part II: Is GIIc an adhesive material property?(A neural network analysis). Journal of Advanced Joining Processes 3:100049. doi:10.1016/j.jajp.2021.100049.
   Google Scholar
• Eslami-Farsani, R. 2015. Effect of fiber treatment on the mechanical properties of date palm fiber reinforced PP/EPDM composites. Advanced Composite Materials 24 (1):27–40. doi:10.1080/09243046.2013.871177.
   Web of Science ®Google Scholar
• Gandini, A., and M. N. Belgacem. 2001. Modifying cellulose fibre surfaces in the manufacture of natural fibre composites. In Interface engineering of natural fibre composites for maximum performance, 3–42. Cambridge, UK: Woodhead Publishing.
   Google Scholar
• Han, J. S., W. Kim, and R. M. Rowell. 1995. “Chemical and physical properties of kenaf as a function of growth.” Proceedings of the 7th Annual International Kenaf Association Conference Irving, Tex, USA.
   Google Scholar
• Ismail, H., M. R. Edyham, and B. Wirjosentono. 2002. Bamboo fibre filled natural rubber composites: The effects of filler loading and bonding agent. Polymer Testing 21 (2):139–44. doi:10.1016/S0142-9418(01)00060-5.
   Web of Science ®Google Scholar
• Jia, Z., X. Feng, and Y. Zou. 2018. Graphene reinforced epoxy adhesive for fracture resistance. Composites Part B: Engineering 155:457–62. doi:10.1016/j.compositesb.2018.09.093.
   Web of Science ®Google Scholar
• Joao, M., A. Akhavan‐Safar, R. Carbas, E. Marques, R. Goyal, M. El‐zein, and L. F. M. da Silva. 2020. Influence of mode mixity and loading conditions on the fatigue crack growth behaviour of an epoxy adhesive. Fatigue & Fracture of Engineering Materials & Structures 43 (2):308–16. doi:10.1111/ffe.13125.
   Web of Science ®Google Scholar
• Kaddami, H., A. Dufresne, B. Khelifi, A. Bendahou, M. Taourirte, M. Raihane, N. Issartel, H. Sautereau, J.-F. Gerard, and N. Sami. 2006. Short palm tree fibers–Thermoset matrices composites. Composites. Part A, Applied Science and Manufacturing 37 (9):1413–22. doi:10.1016/j.compositesa.2005.06.020.
   Web of Science ®Google Scholar
• Khakpour, H., M. R. Ayatollahi, A. Akhavan-Safar, and L. F. M. da Silva. 2020. Mechanical properties of structural adhesives enhanced with natural date palm tree fibers: Effects of length, density and fiber type. Composite Structures 237:111950. doi:10.1016/j.compstruct.2020.111950.
   Web of Science ®Google Scholar
• Kunz-Douglass, S., P. W. R. Beaumont, and M. F. Ashby. 1980. A model for the toughness of epoxy-rubber particulate composites. Journal of Materials Science 15 (5):1109–23. doi:10.1007/BF00551799.
   Web of Science ®Google Scholar
• Kwon, D.-J., I.-J. Kwon, J. Kong, and S.-Y. Nam. 2020. Investigation of impediment factors in commercialization of reinforced adhesives. Polymer Testing 93: 106995.
   Web of Science ®Google Scholar
• Mahdavi, S., H. Kermanian, and A. Varshoei. 2010. Comparison of mechanical properties of date palm fiber-polyethylene composite. BioResources 5 (4):2391–403.
   Web of Science ®Google Scholar
• Mallick, P. K. 2007. Fiber-reinforced composites: Materials, manufacturing, and design. UK: CRC press.
   Google Scholar
• Mohanty, A. K., M. Misra, and L. T. Drzal. 2005. Natural fibers, biopolymers, and biocomposites. UK: CRC press.
   Google Scholar
• Musiari, F., A. Pirondi, A. Zucchelli, D. Menozzi, J. Belcari, T. M. Brugo, and L. Zomparelli. 2018. Experimental investigation on the enhancement of Mode I fracture toughness of adhesive bonded joints by electrospun nanofibers. The Journal of Adhesion 94 (11):974–90. doi:10.1080/00218464.2017.1402301.
   Web of Science ®Google Scholar
• Ning, H., S. Pillay, N. Lu, S. Zainuddin, and Y. Yan. 2019. Natural fiber-reinforced high-density polyethylene composite hybridized with ultra-high molecular weight polyethylene. Journal of Composite Materials 53 (15):2119–29. doi:10.1177/0021998318822716.
   Web of Science ®Google Scholar
• Oushabi, A., S. Sair, Y. Abboud, O. Tanane, and A. El Bouari. 2017a. An experimental investigation on morphological, mechanical and thermal properties of date palm particles reinforced polyurethane composites as new ecological insulating materials in building. Case Studies in Construction Materials 7:128–37. doi:10.1016/j.cscm.2017.06.002.
   Google Scholar
• Oushabi, A., S. Sair, F. Oudrhiri Hassani, Y. Abboud, O. Tanane, and A. El Bouari. 2017b. The effect of alkali treatment on mechanical, morphological and thermal properties of date palm fibers (DPFs): Study of the interface of DPF–Polyurethane composite. South African Journal of Chemical Engineering 23 (Supplement C):116–23. doi:10.1016/j.sajce.2017.04.005.
   Google Scholar
• Prasad, L., A. Saini, and V. Kumar. 2021. Mechanical performance of Jute and Basalt Fiber Geo-grid-reinforced epoxy hybrid composite material. Journal of Natural Fibers 18 (5):694–704. doi:10.1080/15440478.2019.1645789.
   Web of Science ®Google Scholar
• Quan, D., and A. Ivankovic. 2015. Effect of core–shell rubber (CSR) nano-particles on mechanical properties and fracture toughness of an epoxy polymer. Polymer 66:16–28. doi:10.1016/j.polymer.2015.04.002.
   Web of Science ®Google Scholar
• Ravindran, A. R., R. B. Ladani, W. Shuying, A. J. Kinloch, C. H. Wang, and A. P. Mouritz. 2018. Multi-scale toughening of epoxy composites via electric field alignment of carbon nanofibres and short carbon fibres. Composites Science and Technology 167:115–25. doi:10.1016/j.compscitech.2018.07.034.
   Web of Science ®Google Scholar
• Rocha, A. V. M., A. Akhavan‐Safar, R. Carbas, E. A. S. Marques, R. Goyal, M. El‐zein, and L. F. M. da Silva. 2020. Fatigue crack growth analysis of different adhesive systems: Effects of mode mixity and load level. Fatigue & Fracture of Engineering Materials & Structures 43 (2):330–41. doi:10.1111/ffe.13145.
   Web of Science ®Google Scholar
• Rout, J., M. Misra, S. S. Tripathy, S. K. Nayak, and A. K. Mohanty. 2001. The influence of fibre treatment on the performance of coir-polyester composites. Composites Science and Technology 61 (9):1303–10. doi:10.1016/S0266-3538(01)00021-5.
   Web of Science ®Google Scholar
• Rowell, R. M. 2008. Natural fibres: Types and properties. In Properties and performance of natural-fibre composites. Cambridge, UK: Woodhead Publishing.
   Google Scholar
• Salih, A., R. Z. Abeer, and C. Husna Azhari. 2020. Tensile properties and microstructure of single-cellulosic bamboo fiber strips after alkali treatment. Fibers 8 (5):26. doi:10.3390/fib8050026.
   Web of Science ®Google Scholar
• Taj, S., M. Ali Munawar, and S. Khan. 2007. “Natural fiber-reinforced polymer composites.” Proceedings-Pakistan Academy of Sciences 44 ( 2):129–144.
   Google Scholar
• Tripathy, S., J. Dehury, and D. Mishra 2016. “A study on the effect of surface treatment on the physical and mechanical properties of date-palm stem fiber embedded epoxy composites.” 5th National Conference on Processing and Characterization of Materials, Rourkela, India, .
   Google Scholar