Characterization of Indonesian Banana Species as an Alternative Cellulose Fibers

References

• Ahmad, T., and M. Danish. 2018. Prospects of banana waste utilization in wastewater treatment: A review. Journal of Environmental Management 206:330–48. doi:10.1016/j.jenvman.2017.10.061.
   PubMed Web of Science ®Google Scholar
• Al-Oqla, F. M., and M. S. Salit. 2017. Materials Selection for Natural Fiber Composites. G. Jones, Ed. Woodhead Publishing, Matthew Deans.
   Google Scholar
• Ashik, K. P., and R. S. Sharma. 2015. A Review on mechanical properties of natural fiber reinforced hybrid polymer composites. Journal of Minerals and Materials Characterization and Engineering 03:420–26. doi:10.4236/jmmce.2015.35044.
   Google Scholar
• Asim, M., K. Abdan, M. Jawaid, M. Nasir, Z. Dashtizadeh, M. R. Ishak, M. E. Hoque, and Y. Deng. 2015. A review on pineapple leaves fibre and its composites. International Journal of Polymer Science 2015:1–17. doi:10.1155/2015/950567.
   Web of Science ®Google Scholar
• Bajpai, P. 2018. Pulp bleaching. In Biermann’s Handbook of Pulp and Paper,3rd, 465–91. doi: 10.1016/b978-0-12-814240-0.00019-7.
   Google Scholar
• Bilba, K., M. A. Arsene, and A. Ouensanga. 2007. Study of banana and coconut fibers botanical composition, thermal degradation, and textural observations. Bioresource Technology 98:58–68. doi:10.1016/j.biortech.2005.11.030.
   PubMed Web of Science ®Google Scholar
• Blanco, A., M. C. Monte, C. Campano, A. Balea, N. Merayo, and C. Negro. 2018. Chapter 5 - Nanocellulose for Industrial Use: Cellulose Nanofibers (CNF), Cellulose Nanocrystals (CNC), and Bacterial Cellulose (BC). In Handbook of Nanomaterials for Industrial Applications, ed. C. M. Hussain, 74–126. Elsevier. doi:10.1016/B978-0-12-813351-4.00005-5.
   Google Scholar
• Bondeson, D., A. Mathew, and K. Oksman. 2006. Optimization of the isolation of nanocrystals from microcrystalline cellulose by acid hydrolysis. Cellulose 13 (2):171–80. doi:10.1007/s10570-006-9061-4.
   Web of Science ®Google Scholar
• BSN. 2012. ”SNI 5351:2012-pulp - cara uji bilangan viskositas limit (viskositas intrinsik) dalam larutan kuprietilendiamina (CED). “ Jakarta: Badan Standardisasi Nasional.
   Google Scholar
• De Silva, R., and N. Byrne. 2017. Utilization of cotton waste for regenerated cellulose fibres : Influence of degree of polymerization on mechanical properties. Carbohydr. Polym 174:89–94. doi:10.1016/j.carbpol.2017.06.042.
   PubMed Web of Science ®Google Scholar
• Del Rio, J. C., A. Gutierrez, M. Hernando, P. Landin, J. Romero, and A. T. Martinez. 2005. Determining the influence of eucalyptus composition in paper pulp yield using Py-GC/MS. Journal of Analytical and Applied Pyrolysis 74:110–15. doi:10.1016/j.jaap.2004.10.010.
   Web of Science ®Google Scholar
• Derrouiche, I., I. B. Marzoug, F. Sakli, and S. Roudesli. 2015. Study of extraction and characterization of ultimate date palm fibers. Advances in Materials 4:7–14. doi:10.11648/j.am.s.2015040501.12.
   Google Scholar
• Dhakal, H. N., Z. Y. Zhang, and M. O. W. Richardson. 2007. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Composites Science and Technology 67 (7–8):1674–83. doi:10.1016/j.compscitech.2006.06.019.
   Web of Science ®Google Scholar
• Dhaliwal, J. S. 2020. Natural Fibers: Applications. In In Development and modifications of natural fibers, Chap. 2, Intechopen.
   Google Scholar
• Elanthikkal, S., U. Gopalakrishnapanicker, S. Varghese, and J. T. Guthrie. 2010. Cellulose microfibres produced from banana plant wastes: Isolation and characterization. Carbohydrate Polymers 80 (3):852–59. doi:10.1016/j.carbpol.2009.12.043.
   Web of Science ®Google Scholar
• Fang, C., J. E. Schmidt, I. Cybulska, G. P. Brudecki, C. G. Frankær, and M. H. Thomsen. 2015. Hydrothermal pretreatment of date palm (Phoenix dactylifera L.) leaflets and rachis to enhance enzymatic digestibility and bioethanol potential. BioMed Research International 1–13. doi:10.1155/2015/216454.
   Web of Science ®Google Scholar
• Fatriasari, W. “Produksi gula pereduksi melalui rekayasa proses pra-pelakuan bambu betung (Dendrocalamus asper (Schult. f)).” Doctoral thesis. Bogor Agricultural University
   Google Scholar
• Fatriasari, W., W. Syafii, N. J. Wistara, K. Syamsu, and B. Prasetya. 2014. The characteristic changes of betung bamboo (Dendrocalamus asper) pretreated by fungal pretreatment. International Journal of Renewable Energy Development (IJRED) 3 (2):133–43. doi:10.14710/ijred.3.2.133-143.
   Google Scholar
• Fatriasari, W., W. Syafii, N. J. Wistara, K. Syamsu, and B. Prasetya. 2016. Lignin and cellulose changes of betung bamboo (Dendrocalamus asper) pretreated microwave heating. International Journal on Advanced Science, Engineering and Information Technology 6:186–95. doi:10.18517/ijaseit.6.2.688.
   Google Scholar
• Ferdous, T., M. A. Quaiyyum, S. Bashar, and M. S. Jahan. 2020. Anatomical, morphological and chemical characteristics of kaun straw (Seetaria-ltalika). Nordic Pulp and Paper Research Journal 35 (2):288–98. doi:10.1515/npprj-2019-0057.
   Web of Science ®Google Scholar
• Ghalibaf, M., T. R. K. C. Doddapaneni, and R. Alén. 2019. Pyrolytic behavior of lignocellulosic-based polysaccharides. Journal of Thermal Analysis and Calorimetry 137:121–31. doi:10.1007/s10973-018-7919-y.
   Web of Science ®Google Scholar
• Gupta, U. S., M. Dhamarikar, A. Dharkar, S. Tiwari, and R. Namdeo. 2020. Study on the effects of fibre volume percentage on banana-reinforced epoxy composite by finite element method. Advanced Composites and Hybrid Materials 3 (4):530–40. doi:10.1007/s42114-020-00179-9.
   Google Scholar
• Horvath, L., I. Peszlen, P. Peralta, B. Kasal, and L. Li. 2010. Mechanical properties of genetically engineered young aspen with modified lignin content and/or structure. Wood and Fiber Science 42 (3):310–17.
   Web of Science ®Google Scholar
• Ibrahim, M. M., F. A. Agblevor, and W. K. El-Zawawy. 2010. Isolation and characterization of cellulose and lignin from steam-exploded lignocellulosic biomass. Bioresources 5:397–418.
   Web of Science ®Google Scholar
• Ismayati, M., A. Nakagawa-Izumi, N. N. Kamaluddin, and H. Ohi. 2016. Toxicity and feeding deterrent effect of 2-methylanthraquinone from the wood extractives of Tectona grandis on the subterranean termites Coptotermes formosanus and Reticulitermes speratus. Insects Del Rio, J. C., J. Rencoret, G. Marques, J. Li, G. Gellerstedt, J. Jiménez-Barbero, T. A. Matinez, and A. Gutiérrez. 2009. “Structural characterization of the lignin from Jute (Corchorus capsularis) Fibers. Journal of Agricultural and food chemistry 57: 10271–1028. 7 (4):63. doi:10.3390/insects7040063.
   PubMed Web of Science ®Google Scholar
• Jasiukaitytė-Grojzdek, E., M. Kunaver, and I. Poljanšek. 2012. Influence of cellulose polymerization degree and crystallinity on kinetics of cellulose degradation. BioRes 7 (3):3008–27.
   Web of Science ®Google Scholar
• Joshi, P. V., A. A. Mandot, and B. H. Patel. 2018. Enzymatic extraction of nano cellulose from banana stem : Morphological, structural and thermal characterization. School Library Research 8:1–11.
   Google Scholar
• Justiz-Smith, N. G., G. Junior Virgo, and V. E. Buchanan. 2008. Potential of Jamaican banana, coconut coir and bagasse fibres as composite materials. Materials Characterization 59 (9):1273–78. doi:10.1016/j.matchar.2007.10.011.
   Web of Science ®Google Scholar
• Karimah, A., M. R. Ridho, S. S. Munawar, Ismadi, Y. Amin, R. Damayanti, M. A. R. Lubis, M. A. R. Wulandari, Nurindah, A. H. Iswanto, et al. 2021b. A Comprehensive Review on Natural Fibers: Technological and Socio-Economical Aspects. Polymers 13 (24):4280. doi:10.3390/polym13244280.
   PubMed Web of Science ®Google Scholar
• Karimah, A., M. R. Ridho, S. S. Munawar, D. S. A. Ismadi, R. Damayanti, B. Subiyanto, W. Fatriasari, and A. Fudholi. 2021a. A review on natural fibers for development of eco-friendly bio-composite: Characteristics, and utilization. Journal of Materials Research and Technology 13:2442–58. doi:10.1016/j.jmrt.2021.06.014.
   Google Scholar
• Komuraiah, A., N. S. Kumar, and B. D. Prasad. 2014. Chemical composition of natural fibers and its influence on their mechanical properties. Mechanics of Composite Materials 50 (3):359–76. doi:10.1007/s11029-014-9422-2.
   Web of Science ®Google Scholar
• Koutsianitis, D., C. Mitani, K. Giagli, D. Tsalagkas, K. Halász, O. Kolonics, C. Gallis, and L. Csóka. 2015. Properties of ultrasound extracted bicomponent lignocellulose thin films. Ultrasonics Sonochemistry 23:148–55. doi:10.1016/j.ultsonch.2014.10.014.
   PubMed Web of Science ®Google Scholar
• Li, K., S. Fu, H. Zhan, Y. Zhan, and L. A. Lucia. 2010a. Analysis of the chemical composition and morphological structure of banana pseudo-stem. BioResources 5:576–85. doi:10.15376/biores.5.2.576-585.
   Web of Science ®Google Scholar
• Li, X., E. Ximenes, Y. Kim, M. Slinger, R. Meilan, M. Ladisch, and C. Chapple. 2010b. Lignin monomer composition affects Arabidopsis cell-wall degradability after liquid hot water pretreatment. Biotechnology for Biofuels 3 (1):27. doi:10.1186/1754-6834-3-27.
   PubMedGoogle Scholar
• Lourenço, A., J. Gominho, and H. Pereira. 2018. Chemical characterization of lignocellulosic materials by analytical pyrolysis. In In Analytical Pyrolysis, Chap. 2, IntechOpen.
   Google Scholar
• Malešič, J., I. Kraševec, and I. K. Cigić. 2021. Determination of cellulose degree of polymerization in historical papers with high lignin content. Polymers (Basel) 13 (12):1–15. doi:10.3390/polym13121990.
   Web of Science ®Google Scholar
• Mburu, F., P. Sirmah, F. Muisu, S. Dumar-cay, and P. Gerardin. 2013. Selected wood properties of Prunus africana (Hook) grown in Kenya as possible reasons for its high natural durability. Drvna Ind 64:19–24. doi:10.5552/drind.2013.1238.
   Web of Science ®Google Scholar
• Milani, M. D. Y., D. S. Samarawickrama, G. P. C. A. Dharmasiri, and I. R. M. Kottegoda. 2016. Study the Structure, Morphology, and Thermal Behavior of Banana Fiber and Its Charcoal Derivative from Selected Banana Varieties. Journal of Natural Fibers 13 (3):332–42. doi:10.1080/15440478.2015.1029195.
   Web of Science ®Google Scholar
• Mwaikambo, L. Y., and M. P. Ansell. 2006. Mechanical properties of alkali treated plant fibres and their potential as reinforcement materials. I. hemp fibres. Journal of Materials Science 41 (8):2483–96. doi:10.1007/s10853-006-5098-x.
   Web of Science ®Google Scholar
• Ortega, Z., M. Morón, M. D. Monzón, P. Badalló, and R. Paz. 2016. Production of banana fiber yarns for technical textile reinforced composites. Materials 9 (5):1–16. doi:10.3390/ma9050370.
   Web of Science ®Google Scholar
• Patwardhan, P. R., J. A. Satrio, C. Brown, and B. H. Shanks. 2009. Product distribution from fast pyrolysis of glucose-based carbohydrates. Journal of Analytical and Applied Pyrolysis 86 (2):323–30. doi:10.1016/j.jaap.2009.08.007.
   Web of Science ®Google Scholar
• Perrier, X., E. De Langhe, M. Donohue, C. Lentfer, L. Vrydaghs, F. Bakry, F. Carreel, I. Hippolyte, J.-P. Horry, C. Jenny, et al. 2011. Multidisciplinary perspectives on banana (Musa spp.) domestication. Proceedings of the National Academy of Sciences. 108(28):11311–18. doi:10.1073/pnas.1102001108.
   PubMed Web of Science ®Google Scholar
• Petroudy, S. R. D. 2017. Physical and mechanical properties of natural fibers. Advanced high strength natural fibre composites in constructioned., M. Fan and F. Fu, 59–83. Woodhead Publishing. Chap. 3. 10.1016/B978-0-08-100411-1.00003-0.
   Google Scholar
• Poletto, M., L. H. O. Júnior, and A. J. Zattera. 2015. Thermal decomposition of natural fibers: Kinetics and degradation mechanisms. In Reactions and Mechanisms in Thermal Analysis of Materials, ed. A. Tiwari and B. Raj, 515–46. Scrivener Publishing LLC. doi:10.1002/9781119117711.ch21.
   Google Scholar
• Preethi, P., and M. Balakrishna. 2013. Physical and Chemical Properties of banana fibre extracted from commercial banana cultivars grown in Tamilnadu state. Agrotechnology 11:1–3. doi:10.4172/2168-9881.s11-008.
   Google Scholar
• Reddy, N., and Y. Yang. 2005. Biofibers from agricultural byproducts for industrial applications. Trends in Biotechnology 23 (1):22–27. doi:10.1016/j.tibtech.2004.11.002.
   PubMed Web of Science ®Google Scholar
• Romagnoli, M., V. Vinciguerra, and A. Silvestri. 2018. Heat treatment effect on lignin and carbohydrates in Corsican pine earlywood and latewood studied by PY–GC–MS technique. Journal of Wood Chemistry and Technology 38 (1):57–70. doi:10.1080/02773813.2017.1372479.
   Web of Science ®Google Scholar
• Rowell, R. M., J. S. Han, and J. S. Rowell. 2000. Characterization and factors effecting fiber properties. In Natural polymers and agrofibers based composites, ed. E. Frollini, A. L. Leão, and L. H. C. Mattoso, 115–34. Embrapa Instrumentação Agropecuária.
   Google Scholar
• Rowell, R. M., R. Pettersen, J. S. Han, J. S. Rowell, and M. A. Tshabalala. 2005. Cell wall chemistry. In Handbook Wood Chemistry and Wood Composites, ed. R. M. Rowell, 71–72. 1st edn ed. CRC Press LLC.
   Google Scholar
• Salmén, L., and I. Burgert. 2009. Cell wall features with regard to mechanical performance. A Review. COST Action E35 2006– 2009: Wood Machining – Micromechanics and Fracture. Holzforshung 63:121–29. doi:10.1515/HF.2009.011.
   Web of Science ®Google Scholar
• Sango, T., A. M. Cheumani Yona, L. Duchatel, A. Marin, M. Kor Ndikontar, N. Joly, and J. M. Lefebvre. 2018. Step–wise multi–scale deconstruction of banana pseudo–stem (Musa acuminata) biomass and morpho–mechanical characterization of extracted long fibres for sustainable applications. Industrial Crops and Products 122:657–68. doi:10.1016/j.indcrop.2018.06.050.
   Web of Science ®Google Scholar
• Serrano, L., E. S. Esakkimuthu, N. Marlin, M.-C. Brochier-Salon, G. Mortha, and F. Bertaud. 2018. Fast, easy, and economical quantification of lignin phenolic hydroxyl groups: Comparison with classical techniques. Energy & Fuels 32 (5):5969–77. doi:10.1021/acs.energyfuels.8b00383.
   Web of Science ®Google Scholar
• Simmonds, N. W., and K. Shepherd. 1955. The taxonomy and origins of the cultivated bananas. Journal of the Linnean Society of London, Botany 55 (359):302–12. doi:10.1111/j.1095-8339.1955.tb00015.x.
   Google Scholar
• Studer, M. H., J. D. DeMartini, M. F. Davis, R. W. Sykes, B. Davison, M. Keller, G. A. Tuskan, and C. E. Wyman. 2011. Lignin content in natural Populus variants affects sugar release. Proceedings of the National Academy of Sciences 108 (15):6300–05. doi:10.1073/pnas.1009252108.
   PubMed Web of Science ®Google Scholar
• Subagyo, A., and A. Chafidz. 2018. Banana Pseudo-Stem Fiber: Preparation, Characteristics, and Applications. In Chap. 4. In Banana Nutrition-Function and Processing Kineties, 1–19. IntechOpen.
   Google Scholar
• Sunthornvarabhas, J., P. Rungthaworn, U. Sukatta, N. Juntratip, and K. Sriroth. 2020. Antimicrobial tendency of bagasse lignin extracts by Raman peak intensity. Sugar Tech 22 (4):697–705. doi:10.1007/s12355-019-00778-x.
   Web of Science ®Google Scholar
• Tsutsumi, Y., R. Kondo, K. Sakai, and H. Imamura. 1995. The difference of reactivity between syringyl lignin and guaiacyl lignin in alkaline systems. Holzforschung 49 (5):423–28. doi:10.1515/hfsg.1995.49.5.423.
   Web of Science ®Google Scholar
• Venkateshwaran, N., and A. Elayaperumal. 2010. Banana fiber reinforced polymer composites - A review. Journal of Reinforced Plastics and Composites 29 (15):2387–96. doi:10.1177/0731684409360578.
   Web of Science ®Google Scholar
• Ververis, C., K. Georghiou, N. Christodoulakis, P. Santas, and R. Santas. 2004. Fiber dimensions, lignin and cellulose content of various plant materials and their suitability for paper production. Industrial Crops and Products 19 (3):245–54. doi:10.1016/j.indcrop.2003.10.006.
   Web of Science ®Google Scholar
• Wang, J. H. 1999. Papermaking raw materials of China. In An Atlas of micrographs and the characteristics of fibers, 66–67. China Light Industry Press.
   Google Scholar
• Wise, L. E., and M. Murphy, Addieco. 1946. Chlorite holocellulose, its fractionation and bearing on summative wood analysis and on studies on the hemicelluloses. Paper Trade Journal 122:35–43.
   Google Scholar
• Yoo, C. G., A. Dumitrache, W. Muchero, J. Natzke, H. Akinosho, M. Li, R. W. Sykes, S. D. Brown, B. Davison, G. A. Tuskan, et al. 2018. Significance of lignin S/G ratio in biomass recalcitrance of Populus trichocarpa variants for bioethanol production. ACS Sustainable Chemistry & Engineering 6 (2):2162–68. doi:10.1021/acssuschemeng.7b03586.
   Web of Science ®Google Scholar
• Zhang, S. Y., B. H. Fei, Y. Yu, H. T. Cheng, and C. G. Wang. 2013. Effect of the amount of lignin on tensile properties of single wood fiber. Forest Science and Practice 15:56–60. doi:10.1007/s11632-013-0106-0.
   Google Scholar
• Zuluaga, R., J. L. Putaux, A. Restrepo, I. Mondragon, and P. Gañán. 2007. Cellulose microfibrils from banana farming residues: Isolation and characterization. Cellulose 14:585–92. doi:10.1007/s10570-007-9118-z.
   Web of Science ®Google Scholar