References
- Abdullah-Al-Kafi, M. Z. A., K. L. Pickering, K. L. Pickering, A. K. Mubarak, and M. A. Khan. 2006. Study on the Mechanical Properties of Jute/Glass Fiber-Reinforced Unsaturated Polyester Hybrid Composites: Effect of Surface Modification by Ultraviolet Radiation. Journal of Reinforced Plastics and Composites 25 (6):575–88. doi:10.1177/0731684405056437.
- Bajpai, P. K., I. Singh, and J. Madaan. 2014. Development and Characterization of PLA-Based Green Composites. Journal of Thermoplastic Composite Materials 27 (1):52–81. doi:10.1177/0892705712439571.
- Dong, C. 2018. Review of Natural Fibre-Reinforced Hybrid Composites. Journal of Reinforced Plastics and Composites 37 (5):331–48. doi:10.1177/0731684417745368.
- Jha, K., R. Kumar, J. Verma, and R. Kataria. 2018. Nonlinear Modelling of Roughness Parameters in Finish Turning of EN31 High Carbon Steel. International Journal of Machining and Machinability of Materials 20 (5):460. doi:10.1504/IJMMM.2018.096050.
- Kishore, R. A., R. Tiwari, A. Dvivedi, and I. Singh. 2009. Taguchi Analysis of the Residual Tensile Strength after Drilling in Glass Fiber Reinforced Epoxy Composites. Materials & Design 30 (6):2186–90. doi:10.1016/j.matdes.2008.08.035.
- Mann, G. S., L. Pal Singh, P. Kumar, and S. Singh. 2020. Green Composites: A Review of Processing Technologies and Recent Applications. Journal of Thermoplastic Composite Materials 33 (8):1145–71. doi:10.1177/0892705718816354.
- Navaneethakrishnan, S., and A. Athijayamani. 2017. Taguchi Method for Optimization of Fabrication Parameters with Mechanical Properties in Sisal Fibre–Vinyl Ester Composites. Australian Journal of Mechanical Engineering 15 (2):74–83. doi:10.1080/14484846.2015.1093258.
- Ramesh, M., K. Palanikumar, and K. Hemachandra Reddy. 2013. Comparative Evaluation on Properties of Hybrid Glass Fiber- Sisal/Jute Reinforced Epoxy Composites. Procedia Engineering 51:745–50. doi:10.1016/j.proeng.2013.01.106.
- Samal, S. K., S. Mohanty, and S. K. Nayak. 2009. Polypropylene—Bamboo/Glass Fiber Hybrid Composites: Fabrication and Analysis of Mechanical, Morphological, Thermal, and Dynamic Mechanical Behavior. Journal of Reinforced Plastics and Composites 28 (22):2729–47. doi:10.1177/0731684408093451.
- Singh, J. I. P., S. Singh, and V. Dhawan. 2020a. Influence of Fiber Volume Fraction and Curing Temperature on Mechanical Properties of Jute/PLA Green Composites. Polymers and Polymer Composites 28 (4):273–84. doi:10.1177/0967391119872875.
- Singh, J. I. P., S. Singh, and V. Dhawan. 2020b. Effect of Alkali Treatment on Mechanical Properties of Jute Fiber-Reinforced Partially Biodegradable Green Composites Using Epoxy Resin Matrix. Polymers and Polymer Composites 28 (6):388–97. doi:10.1177/0967391119880046.
- Singh, M. K., and S. Zafar. 2019. Development and Mechanical Characterization of Microwave-Cured Thermoplastic Based Natural Fibre Reinforced Composites. Journal of Thermoplastic Composite Materials 32 (10):1427–42. doi:10.1177/0892705718799832.
- Tang, S. H., Y. J. Tan, S. M. Sapuan, S. Sulaiman, N. Ismail, and R. Samin. 2007. The Use of Taguchi Method in the Design of Plastic Injection Mould for Reducing Warpage. Journal of Materials Processing Technology 182 (1–3):418–26. doi:10.1016/j.jmatprotec.2006.08.025.
- Vijay, R., S. G. Jafrey Daniel James Dhilip, S. Harikrishnan, B. Chandru, M. Amarnath, and A. Khan. 2022. Characterization of Natural Cellulose Fiber from the Barks of Vachellia Farnesiana. Journal of Natural Fibers 19 (4):1343–52. doi:10.1080/15440478.2020.1764457.