A Review on Drilling of Natural and Synthetic Fiber Reinforced Polymer Composites: 1992 - 2021

References

• Abilash, N., and M. Sivapragash. 2016. Optimizing the delamination failure in bamboo fiber reinforced polyester composite. Journal of King Saud University – Engineering Sciences 28:92–102. doi:10.1016/j.jksues.2013.09.004.
   Google Scholar
• Agwa, M. A., and A. A. Megahed. 2019. New nonlinear regression modeling and multi-objective optimization of cutting parameters in drilling of GFRE composites to minimize delamination. Polymer Testing 75:192–204. doi:10.1016/j.polymertesting.2019.02.011.
   Web of Science ®Google Scholar
• Ahmad, N., S. Ali Khan, and S. Farhan Raza. 2019. Influence of hole diameter, workpiece thickness, and tool surface condition on machinability of CFRP composites in orbital drilling: A case of workpiece rotation. The International Journal of Advanced Manufacturing Technology 103:2007–15. doi:10.1007/s00170-019-03713-2.
   Web of Science ®Google Scholar
• Al-wandi, S., S. Ding, and M. John. 2017. An approach to evaluate delamination factor when drilling carbon fiber-reinforced plastics using different drill geometries: Experiment and finite element study. The International Journal of Advanced Manufacturing Technology 93:4043–61. doi:10.1007/s00170-017-0880-2.
   Web of Science ®Google Scholar
• Alagappan, K. M., S. Vijayaraghavan, M. P. Jenarthanan, and R. Giridharan. 2020. Optimization of process parameters on drilling of natural fibres reinforced in epoxy resin matrices using Taguchi–Grey relational analysis. Multidiscipline Modeling in Materials and Structures 16 (5):937–949. 10.1108/MMMS-06-2019-0108.
   Web of Science ®Google Scholar
• Amuthakkannan, P., V. Manikandan, and M. Uthayakumar. 2015. Analysis of delamination in drilling of basalt fiber reinforced polymer composites. Materials Physics and Mechanics 24:1–8.
   Google Scholar
• Anand, P., and V. Anbumalar. 2014. Mechanical properties of cellulose-filled epoxy hybrid composites reinforced with alkali-treated hemp fiber. Polymer Korea 39 (1):46–55. doi:10.7317/pk.2015.39.1.46.
   Web of Science ®Google Scholar
• Arputhabalana, J., S. Prabhu, K. Palanikumar, S. Venkatesh, and K. Vijay. 2019. Assay of machining attributes in drilling of natural hybrid fiber reinforced polymer composite. Materials Today: Proceedings 16:1097–105. doi:10.1016/j.matpr.2019.05.201.
   Google Scholar
• Arul, S., D. Samuel Raj, L. Vijayaraghavan, S. K. Malhotra, and R. Krishnamurthy. 2006. Modeling and optimization of process parameters for defect tolerance drilling of GFRP composites. Materials and Manufacturing Processes 21 (4):357–65. doi:10.1080/10426910500411587.
   Web of Science ®Google Scholar
• Arul, S., L. Vijayaraghavan, S. K. Malhotra, and R. Krishnamurthy. 2006. The effect of vibratory drilling on hole quality in polymeric composites. International Journal of Machine Tools & Manufacture 46:252–59. doi:10.1016/j.ijmachtools.2005.05.023.
   Web of Science ®Google Scholar
• Ashok Kumar, H. P. U., and P. Laxminarayana. 2021. Micro drilling of glass fibre reinforced polymer composites. Materials Today: Proceedings 46 (19):9252–56. doi:10.1016/j.matpr.2020.01.545.
   Google Scholar
• Bhat, R., N. Mohan, S. Sharma, D. Pai, and S. Kulkarni. 2020. Multiple response optimisation of process parameters during drilling of GFRP composite with a solid carbide twist drill. Materials Today: Proceedings. doi:10.1016/j.matpr.2020.02.384.
   Google Scholar
• Bhat, R., N. Mohan, S. Sharma, M. Shandilya, and K. Jayachandran. 2019. An integrated approach of CCD-TOPSIS-RSM for optimizing the marine grade GFRP drilling process parameters. Materials Today: Proceedings. doi:10.1016/j.matpr.2019.07.214.
   PubMedGoogle Scholar
• Campos Rubio, J., A. M. Abrao, P. E. Faria, A. Esteves Correia, and J. Paulo Davim. 2008. Effects of high speed in the drilling of glass fibre reinforced plastic: Evaluation of the delamination factor. International Journal of Machine Tools & Manufacture 48:715–20. doi:10.1016/j.ijmachtools.2007.10.015.
   Web of Science ®Google Scholar
• Chaudhary, V., and P. P. Gohil. 2015. Investigations on drilling of bi-directional cotton polyester composite. Materials and Manufacturing Processes. doi:10.1080/10426914.2015.1059444.
   Web of Science ®Google Scholar
• Chen, W.-C. 1997. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. International Journal of Machine Tools and Manufacture 37 (8):1097–108. doi:10.1016/S0890-6955(96)00095-8.
   Web of Science ®Google Scholar
• Chen, L., K. Zhang, H. Cheng, Q. Zhenchao, and Q. Meng. 2016. A cutting force predicting model in orthogonal machining of unidirectional CFRP for entire range of fiber orientation. The International Journal, Advanced Manufacturing Technology. doi:10.1007/s00170-016-9059-5.
   PubMed Web of Science ®Google Scholar
• Colligan, K., and M. Ramulu. 1992. An experimental investigation into pitting of hole surfaces when drilling graphite/epoxy materials. Processing, Fabrication and Manufacturing of Composite Materials ASME 35:11–25.
   Google Scholar
• Davim, J. P., and P. Reis. 2003. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments. Composite Structures 59:481–87. doi:10.1016/S0263-8223(02)00257-X.
   Web of Science ®Google Scholar
• Debnath, K., I. Singh, and A. Dvivedi. 2014. Drilling characteristics of sisal fiber- reinforced epoxy and polypropylene composites. Materials and Manufacturing Processes 29:1401–09. doi:10.1080/10426914.2014.941870.
   Web of Science ®Google Scholar
• Debnath, K., M. Sisodia, A. Kumar, and I. Singh. 2016. Damage free hole making in fiber-reinforced composites: An innovative tool design approach. Materials and Manufacturing Processes 31:1400–08. doi:10.1080/10426914.2016.1140191.
   Web of Science ®Google Scholar
• Dilli Babu, G., K. Sivaji Babu, and B. Uma Maheswar Gowd. 2013. Effect of machining parameters on milled natural fiber-reinforced plastic composites. Journal of Advanced Mechanical Engineering. doi:10.7726/jame.2013.1001.
   Google Scholar
• Durão, L. M. P., D. J. S. Gonçalves, J. M. R. S. Tavares, V. H. C. de Albuquerque, T. H. Panzera, L. J. Silva, A. A. Vieira, and A. M. Baptista. 2013. Drilling delamination outcomes on glass and sisal reinforced plastics. Materials Science Forum.
   Google Scholar
• Eneyew, E. D., and M. Ramulu. 2014. Experimental study of surface quality and damage when drilling unidirectional CFRP composites. Journal of Materials Research and Technology 3 (4):354–62. doi:10.1016/j.jmrt.2014.10.003.
   Google Scholar
• Ficici, F., Z. Ayparcasi, and H. Unal. 2016. Influence of cutting tool and conditions on machinability aspects of polyphthalamide (PPA) matrix composite materials with 30 % glass fiber reinforced. The International Journal, Advanced Manufacturing Technology 1857–1876. doi:10.1007/s00170-016-9626-9.
   PubMed Web of Science ®Google Scholar
• Gashu Melese, K., T. P. Naik, and I. Singh. 2021. Adhesive joining of sisal/jute/hybrid composites with drilled holes in lap area. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235 (2):255–64. doi:10.1177/1464420720959808.
   Web of Science ®Google Scholar
• Heidary, H., N. Zarif Karimi, and G. Minak. 2018. Investigation on delamination and flexural properties in drilling of carbon nanotube/polymer composites. Composite Structures 201:112–20. doi:10.1016/j.compstruct.2018.06.041.
   Web of Science ®Google Scholar
• Hochengt, H., and H. Y. Pcwt. 1992. On drilling characteristics of fiber-reinforced thermoset and thermoplastics. International Journal of Machine Tools and Manufacture 32 (4):583–92. doi:10.1016/0890-6955(92)90047-K.
   Web of Science ®Google Scholar
• Hrechuk, A., V. Bushlya, and J.-E. Ståhl. 2018. Hole-quality evaluation in drilling fiber- reinforced composites. Composite Structures 204:378–87. doi:10.1016/j.compstruct.2018.07.105.
   Web of Science ®Google Scholar
• Hwan Lee, J., G. Jun Cong, and J. Hee Song. 2021. Study on burr formation and tool wear in drilling CFRP and its hybrid composites. Applied Science 11 (384):2–14. doi:10.3390/app11010384.
   Google Scholar
• I, R., and M. S. Shunmugam. 2012. Analyses of forces and hole quality in micro-drilling of carbon fabric laminate composites. Journal of Composite Materials. doi:10.1177/0021998312445594.
   Web of Science ®Google Scholar
• Indira Rani, M., K. R. Ajmeera Ramesh, and N. V. Srinivasulu. 2019. Multi response optimization of process parameters in drilling operation for jute and basalt fabric composite material. International Journal of Engineering and Advanced Technology (IJEAT). doi:10.35940/ijeat.A9380.109119.
   Google Scholar
• Jena, H., and M. Kumar. 2019. Study of influence of process parameters in drilling of glass fibre reinforced polymer composite with clam shell filler. Materials Today. Proceedings. doi:10.1016/j.matpr.2019.07.622.
   PubMedGoogle Scholar
• K, P., S. Prakash, and K. Shanmugam. 2008. Evaluation of delamination in drilling GFRP composites. Materials and Manufacturing Processes 23 (8):858–64. doi:10.1080/10426910802385026.
   Web of Science ®Google Scholar
• Kalyana Sundaram, R., N. Sivashanmugam, D. Shameer, R. Deepak, and G. Saikrishnan. 2020. Experimental investigation of mechanical properties and drilling characteristics on polymer matrix composite materials. Materials Today: Proceedings 43 (2):1057–63. doi:10.1016/j.matpr.2020.08.021.
   Google Scholar
• Karimah, A., M. Rasyidur Ridho, S. Sofyan Munawar, D. Sudarwoko Adi, R. D. Ismadi, B. Subiyanto, W. Fatriasari, A. Fudholi, and A. Fudholi. 2021. A review on natural fibers for development of eco-friendly bio-composite: Characteristics, and utilizations. Journal of Materials Research and Technology 13:2442–58. doi:10.1016/j.jmrt.2021.06.014.
   Google Scholar
• Karthick, R., and M. Aruna. 2015. Appraisal of mechanical properties of sisal fibre reinforced hybrid composites using isopthalic polyester resin. Proceedings of International Conference on Advances in Materials, Manufacturing and Applications. National Institute of Technology, Trichy: Bonfring. April9-11:939–46.
   Google Scholar
• Karthikeyan, K., M. Nagamadhu, M. Jaiprakash, Kiran, and M. Sheriff. 2020. Effect of drilling parameters on natural fiber reinforced with chaired epoxy poly urethane foam composites using grey relational analysis. Materials Today: Proceedings 24:2193–203. doi:10.1016/j.matpr.2020.03.677.
   Google Scholar
• Khan, T., M. Thariq Bin Hameed Sultan, and A. Hamdan Ariffin. 2020. Challenges on machining characteristics of natural fiber-reinforced composites – A review. Journal of Reinforced Plastics and Composites. doi:10.1177/0731684420940773.
   Google Scholar
• Khashaba, U. A. 2004. Delamination in drilling GFR-thermoset composites. Composite Structures 63:313–27. doi:10.1016/S0263-8223(03)00180-6.
   Web of Science ®Google Scholar
• Khashaba, U. A., I. A. El-Sonbaty, A. I. Selmy, and A. A. Megahed. 2010. Machinability analysis in drilling woven GFR/epoxy composites: Part II – Effect of drill wear. Composites: Part A 41:1130–11370. doi:10.1016/j.compositesa.2010.04.011.
   Web of Science ®Google Scholar
• Khashaba, U. A., M. A. Seif, and M. A. Elhamid. 2007. Drilling analysis of chopped composites. Composites: Part A 38:61–70. doi:10.1016/j.compositesa.2006.01.020.
   Web of Science ®Google Scholar
• Kilickap, E. 2010. Determination of optimum parameters on delamination in drilling of GFRP composites by Taguchi method. Indian Journal of Engineering and Material Sciences 17:265–74.
   Web of Science ®Google Scholar
• Kim, D., and M. Ramulu. 2004. Frequency analysis and process monitoring in drilling of composite materials. Advanced Composite Letters 13 (4):185–92. doi:10.1177/096369350401300402.
   Web of Science ®Google Scholar
• Kiran, N. M., M. Jaiprakash, K. Karthikeyan, and M. sheriff. 2020. Study the impact of drilling process parameters on natural fiber reinforced chaired epoxy composites. Materials Today: Proceedings 24:2204–18. doi:10.1016/j.matpr.2020.03.678.
   Google Scholar
• Krishnaraj, V., A. Prabukarthi, A. Ramanathan, N. Elanghovan, M. S. Kumar, R. Zitoune, and J. P. Davim. 2012. Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates. Composites: Part B 43:1791–99. doi:10.1016/j.compositesb.2012.01.007.
   Web of Science ®Google Scholar
• Kumar Bajpai, P., and I. Singh. 2013. Drilling behavior of sisal fiber-reinforced polypropylene composite laminates. Journal of Reinforced Plastics and Composites 32 (20):1569–76. doi:10.1177/0731684413492866.
   Web of Science ®Google Scholar
• Kumar Vankanti, V., and V. Ganta. 2014. Optimization of process parameters in drilling of GFRP composite using Taguchi method. Journal of Materials Research and Technology 3 (1):35–41. doi:10.1016/j.jmrt.2013.10.007.
   Google Scholar
• Kumar, D., and K. K. Singh. 2017. Experimental analysis of delamination, thrust force and surface roughness on drilling of glass fibre reinforced polymer composites material using different drills. Materials Today: Proceedings 4:7618–27. doi:10.1016/j.matpr.2017.07.095.
   Google Scholar
• Liu, L., Q. Chunliang, W. Feng, X. Zhang, and X. Zhu. 2017. Analysis of thrust force and delamination in drilling GFRP composites with candle stick drills. The International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-017-1369-8.
   PubMedGoogle Scholar
• M, R., and A. Gopinath. 2017. Measurement and analysis of thrust force in drilling sisal-glass fiber reinforced polymer composites. IOP Conference Series: Materials Science and Engineering 197. doi:10.1088/1757-899X/197/1/012056.
   Google Scholar
• Mahadevappa, N., V. K. Shankar, S. Sehgal, and R. Upadhya. 2020. Study the impact of drilling process parameters on natural fiber reinforced herringbone epoxy composites. Annales de Chimie Science des Matériaux 44 (5):339–45. doi:10.18280/acsm.440506.
   Web of Science ®Google Scholar
• Malik, K., F. Ahmad, and E. Gunister. 2021. Drilling performance of natural fiber reinforced polymer composites: A review. Journal of Natural Fibers. doi:10.1080/15440478.2020.1870624.
   Google Scholar
• Meinhard, D., A. Haeger, and V. Knoblauch. 2021. Drilling induced defects on carbon fiber-reinforced thermoplastic polyamide and their effect on mechanical properties. Composite Structures 256:113138. doi:10.1016/j.compstruct.2020.113138.
   Web of Science ®Google Scholar
• Mohan, N. S., S. M. Kulkarni, and A. Ramachandra. 2007. Delamination analysis in drilling process of glass fiber reinforced plastic (GFRP) composite materials. Journal of Materials Processing Technology 186:265–71. doi:10.1016/j.jmatprotec.2006.12.043.
   Web of Science ®Google Scholar
• Murthy, B. R. N., R. Beedu, R. Bhat, N. Naik, and P. Prabakar. 2020. Delamination assessment in drilling basalt/carbon fiber reinforced epoxy composite material. Journal of Materials Research and Technology 9 (4):7427–33. doi:10.1016/j.jmrt.2020.05.001.
   Google Scholar
• N, V., and A. ElayaPerumal. 2013. Hole quality evaluation of natural fiber composite using image analysis technique. Journal of Reinforced Plastics and Composites 32 (16):1188–97. doi:10.1177/0731684413486847.
   Web of Science ®Google Scholar
• Nagamadhu, M., R. Upadhya, S. Sehgal, S. Vijay Kumar, and H. Basavaraj. 2020. Mechanical and drilling process characterisation of herringbone sisal fabric reinforced vinyl ester sandwich composites. Advances in Materials and Processing Technologies. doi:10.1080/2374068X.2020.1855963.
   Google Scholar
• Nagaraj, A., A. Uysal, and I. S. Jawahir. 2020. An investigation of process performance when drilling carbon fiber reinforced polymer (CFRP) composite under dry, cryogenic and MQL environments. Procedia Manufacturing 43:551–58. doi:10.1016/j.promfg.2020.02.165.
   Google Scholar
• Ogawa, K., E. Aoyama, H. Inoue, T. Hirogaki, H. Nobe, Y. Kitahara, T. Katayama, and M. Gunjima. 1997. Investigation on cutting mechanism in small diameter drilling for GFFW (thrust force and surface roughness at drilled hole wall). Composite Shuchtres 38:343–50.
   Web of Science ®Google Scholar
• Palanikumar, K. 2007. Modeling and analysis for surface roughness in machining glass fibre reinforced plastics using response surface methodology. Materials & Design 28:2611–18. doi:10.1016/j.matdes.2006.10.001.
   Web of Science ®Google Scholar
• Palanikumar, K. 2011. Experimental investigation and optimisation in drilling of GFRP composites. Measurement 44:2138–48. doi:10.1016/j.measurement.2011.07.023.
   Web of Science ®Google Scholar
• Palanikumar, K., B. Latha, V. S. Senthilkumar, and J. Paulo Davim. 2012. Analysis on drilling of glass fiber– reinforced polymer (GFRP) composites using grey relational analysis. Materials and Manufacturing Processes 27 (3):297–305. doi:10.1080/10426914.2011.577865.
   Web of Science ®Google Scholar
• Palanivel, A., A. Veerabathiran, R. Duruvasalu, S. Iyyanar, and R. Velumayil. 2017. Dynamic mechanical analysis and crystalline analysis of hemp fiber reinforced cellulose filled epoxy composite. Polímeros 27 (4):309–19. doi:10.1590/0104-1428.00516.
   Google Scholar
• Panneerselvam, T., S. Raghuraman, T. K. Kandavel, and K. Mahalingam. 2020. Evaluation and analysis of delamination during drilling on sisal-glass fibres reinforced polymer. Measurement 154:107462. doi:10.1016/j.measurement.2019.107462.
   Web of Science ®Google Scholar
• Patel, K., P. P. Gohil, and V. Chaudhary. 2018. Investigations on drilling of hemp/glass hybrid composites. Materials and Manufacturing Processes 33:1714–25. doi:10.1080/10426914.2018.1453150.
   Web of Science ®Google Scholar
• Pereszlai, C., N. Geier, D. István Poór, B. Zoltán Balázs, and G. Póka. 2021. Drilling fibre reinforced polymer composites (CFRP and GFRP): An analysis of the cutting force of the tilted helical milling process. Composite Structures 262:113646. doi:10.1016/j.compstruct.2021.113646.
   Web of Science ®Google Scholar
• Puglia, D., J. Biagiotti, and J. M. Kenny. 2005. A review on natural fibre-based composites—Part II. Journal of Natural Fibers 1 (3):23–65. doi:10.1300/J395v01n03_03.
   Google Scholar
• Raj Raj, S. S., J. Edwin Raja Dhas, and C. P. Jesuthanam. 2020. Challenges on machining characteristics of natural fiber-reinforced composites – A review. Journal of Reinforced Plastics and Composite. doi:10.1177/0731684420940773.
   Google Scholar
• Rajamurugan, G., A. Prajwal Sanjay, B. M. Prabu Krishnasamy, S. Jain, and S. Jain. 2020. Drilling and mechanical performance analysis on flax-sisal hybrid composite embedded with perforated aluminum foil. Journal of Reinforced Plastics and Composites 39:902–17. doi:10.1177/0731684420937070.
   Web of Science ®Google Scholar
• Rajamurugan, T. V., K. Shanmugam, and K. Palanikumar. 2013. Analysis of delamination in drilling glass fiber reinforced polyester composites. Materials & Design 45:80–87. doi:10.1016/j.matdes.2012.08.047.
   Web of Science ®Google Scholar
• Rajmohan, T. 2016. Experimental investigation and optimization of machining parameters in drilling of fly ash filled carbon fibre reinforced composites. Particulate Science and Technology. doi:10.1080/02726351.2016.1205686.
   Google Scholar
• Ramesh, B., A. Elayaperumal, S. Satishkumar, and A. Kumar. 2018. Drilling of pultruded and liquid composite moulded glass/epoxy thick composites: Experimental and statistical investigation. Measurement 114:109–21. doi:10.1016/j.measurement.2017.09.026.
   Web of Science ®Google Scholar
• Ramesh, M., K. Palanikumar, and K. Hema Chandra Reddy. 2014. Influence of tool materials on thrust force and delamination in drilling sisal-glass fiber reinforced polymer (S-GFRP) composites. Procedia Materials Science 5:1915–21. doi:10.1016/j.mspro.2014.07.513.
   Google Scholar
• Ramkumar, J., S. K. Malhotra, and R. Krishnamurthy. 2002. Studies on drilling of glass/epoxy laminates using coated high-speed steel drills. Materials and Manufacturing Processes 17 (2):213–22. doi:10.1081/AMP-120003531.
   Web of Science ®Google Scholar
• Rezghi Maleki, H., M. Hamedi, M. Kubouchi, and Y. Arao. 2018. Experimental investigation on drilling of natural flax fiber-reinforced composites. Materials and Manufacturing Processes. doi:10.1080/10426914.2018.1532584.
   Google Scholar
• Roy Choudhury, M., M. Shanmuka Srinivas, and K. Debnath. 2018. Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates. Journal of Manufacturing Processes 34:51–61. doi:10.1016/j.jmapro.2018.05.032.
   Web of Science ®Google Scholar
• Sakthivel, M., S. Vijayakumar, and N. Karuppanna Prasad. 2015. Drilling analysis on basalt/sisal reinforced polymer composites using ANOVA and regression model. Applied Mathematical Sciences 9 (66):3285–90. doi:10.12988/ams.2015.54315.
   Google Scholar
• Sandhyarani Pailoor, H. N. N. M., and T. N. Sreenivasa. 2019. Drilling of in-line compression molded jute/polypropylene composites. Journal of Natural Fibers. doi:10.1080/15440478.2019.1612309.
   Web of Science ®Google Scholar
• Saravana Kumar, M., S. Bharani, S. Joe Patrick Gnanaraj, R. Prabaharan, and P. E. S. Paul. 2020. Optimization of machining parameter in drilling of coir-bagasse natural fiber reinforced polymer composites. International Journal of Scientific & Technology Research 9 (1):4250–55.
   Google Scholar
• Saravana Kumar, A., S. Maivizhi Selvi, and L. Rajeshkumar. 2017. Delamination in drilling of sisal/banana reinforced composites produced by hand lay-up process. Applied Mechanics and Materials 867:29–33.
   Google Scholar
• Selvam, R., N. Sathishkumar, K. M. Kumar, N. Arunkumar, and T. Khaleelur Rahman. 2020. Optimization of drilling parameters on hybrid natural fiber reinforced polymer matrix composites. IOP Conference Series: Materials Science and Engineering 923(10.1088/1757-899X/923/1/012059):12059. doi:10.1088/1757-899X/923/1/012059.
   Google Scholar
• Shadrach Jeya Sekaran, A., and K. Palani Kumar. 2019. study on drilling of woven sisal and aloevera natural fibre polymer composite. Materials Today: Proceedings 16:640–46. doi:10.1016/j.matpr.2019.05.140.
   Google Scholar
• Shanmugam, V., U. Marimuthu, S. Rajendran, A. Veerasimman, A. Mahaboob Basha, M. Shukry Bin Abdul Majid, R. Esmaeely Neisiany, M. Försth, G. Sas, S. Mohammad Javad Razavi, et al. 2021. Experimental investigation of thrust force, delamination and surface roughness in drilling hybrid structural composites. Materials 14:4468. doi:10.3390/ma14164468.
   PubMedGoogle Scholar
• Shariff, M., M. Nagamadhu, M. Jaiprakash, K. Karthikeyan, and Kiran. 2020. Effect of drilling process parameters on natural fiber reinforced basket epoxy composites using grey relational analysis. Materials Today: Proceedings 24:2255–64. doi:10.1016/j.matpr.2020.03.753.
   Google Scholar
• Sharma, A., R. Govindasamy, P. Krishnasamy, and Q. Jeeva Singh C. 2020. Influence of copper foil reinforcement on the mechanical and drilling efficiency of sisal/flax epoxy composite. SAE Technical Papers; 2020-28-0416.
   Google Scholar
• Singh, H., B. Dewangan, and P. K. Jain. 2021. Experimental study on drilling characteristics of the hybrid sisal–jute fibre epoxy composites. Journal of Micromanufacturing 4:157–68. doi:10.1177/25165984211015413.
   Google Scholar
• Singh, C. Q. J., R. Govindasamy, P. Krishnasamy, and H. Vardhan Reddy. 2020. Recyclability of particulate natural fibre composite waste on sisal/epoxy composite-mechanical and drilling characterization. SAE Technical Paper 28:398. doi:10.4271/2020-28-0398.
   Google Scholar
• Sridharan, V., and N. Muthukrishnan. 2013. Optimization of machinability of polyester/modified jute fabric composite using grey relational analysis (GRA). Procedia Engineering 64:1003–12. doi:10.1016/j.proeng.2013.09.177.
   Google Scholar
• Tamer Erturk, A., F. Vatansever, E. Yarar, and S. Karabay. 2019. Machining behavior of multiple layer polymer composite bearing with using different drill bits. Composites Part B: Engineering 176:107318. doi:10.1016/j.compositesb.2019.107318.
   Web of Science ®Google Scholar
• Tanaka, H., K. Ohta, R. Takizawa, and K. Yanagi. 2012. Experimental study on tilted planetary motion drilling for CFRP. Procedia CIRP 1:443–48. doi:10.1016/j.procir.2012.04.079.
   Google Scholar
• Upputuri, H. B., V. S. Nimmagadda, and E. Duraisamy. 2020. Optimization of drilling parameters on carbon fiber reinforced polymer composites using fuzzy logic. Materials Today: Proceedings 23 (3):528–35. doi:10.1016/j.matpr.2019.05.400.
   Google Scholar
• Velayudham, A., and R. Krishnamurthy. 2007. Effect of point geometry and their influence on thrust and delamination in drilling of polymeric composites. Journal of Materials Processing Technology 185:204–09. doi:10.1016/j.jmatprotec.2006.03.146.
   Web of Science ®Google Scholar
• Velayudham, A., R. Krishnamurthy, and T. Soundarapandian. 2005. Evaluation of drilling characteristics of high volume fraction fibre glass reinforced polymeric composite. International Journal of Machine Tools & Manufacture 45:399–406. doi:10.1016/j.ijmachtools.2004.09.012.
   Web of Science ®Google Scholar
• Voss, R., M. Henerichs, and F. Kuster. 2016. Comparison of conventional drilling and orbital drilling in machining carbon fibre reinforced plastics (CFRP). CIRP Annals - Manufacturing Technology 65:137–40. doi:10.1016/j.cirp.2016.04.001.
   Web of Science ®Google Scholar
• Won, M. S., and C. K. H. Dharan. 2002. Drilling of aramid and carbon fiber polymer composites. Transactions of the ASME 124:778–83. doi:10.1115/1.1505854.
   Google Scholar
• Zarif Karimi, N., H. Heidary, G. Minak, and M. Fotouhi. 2017. Experimental analysis of GFRP laminates subjected to compression after drilling. Composite Structures 169:144–52. doi:10.1016/j.compstruct.2017.01.017.
   Web of Science ®Google Scholar