Mechanical Behavior of the Alkali-Treated Ichu Fiber-Cementitious Matrix Interface Through Experimental Tests, Numerical, and Analytical Models

References

• Abaqus. 2016. Abaqus analysis user’s guide. Dassault systèmes simulia. Accessed March 15, 2020. http://130.149.89.49:2080/v2016/books/usb/default.htm.
   Google Scholar
• ASTM (American Society for Testing and Materials) C150/C150M-21. 2021. Standard specification for Portland cement. West Conshohocken, PA: ASTM international. doi:10.1520/C0150_C0150M-21
   Google Scholar
• Avila, M. L., R. L. Quevedo, J. B. Rocha, and C. A. R. Morfa. 2010. Modelación Numérica del Ensayo Pull-Out para Losas Compuestas con Lámina Metálica Colaborante. Revista Digital Del Cedex 160:135–52.
   Google Scholar
• Beckert, W., and B. Lauke. 1998. Critical discussion of the single-fibre pull-out test: does it measure adhesion? Composites Science and Technology 57 (12):1689–706. doi:10.1016/S0266-3538(97)00107-3.
   Web of Science ®Google Scholar
• Bheemreddy, V., K. Chandrashekhara, L. R. Dharani, and G. E. Hilmas. 2013. Modeling of fiber pull-out in continuous fiber reinforced ceramic composites using finite element method and artificial neural networks. Computational Materials Science 79 (November):663–73. doi:10.1016/j.commatsci.2013.07.026.
   Google Scholar
• Bowyer, W. H., and M. G. Bader. 1972. On the re-inforcement of thermoplastics by imperfectly aligned discontinuous fibres. Journal of Materials Science 7 (11):1315–21. doi:10.1007/BF00550698.
   Web of Science ®Google Scholar
• Candiotti, S., J. L. Mantari, C. E. Flores, and S. Charca. 2020. Assessment of the mechanical properties of peruvian stipa obtusa fibers for their use as reinforcement in composite materials. Composites Part A: Applied Science and Manufacturing 135 (August):105950. doi:10.1016/j.compositesa.2020.105950.
   Google Scholar
• Chandra, N. 2002. Evaluation of interfacial fracture toughness using cohesive zone model. Composites Part A: Applied Science and Manufacturing 33 (10):1433–47. doi:10.1016/S1359-835X(02)00173-2.
   Web of Science ®Google Scholar
• Esparragoza, I. 1993. Numerical analysis of the pullout problem of a fiber embedded in a matrix: Comparison with an approximate analytical solution. FIU Electronic Theses and Dissertations (July). doi:10.25148/etd.FI15101312.
   Google Scholar
• Frias, M., L. Caneda-Martinez, M. I. Sanchez de Rojas, C. Tenazoa, and E. Flores. 2020. Scientific and technical studies on eco-efficient binary cements produced with thermally activated ichu grass: Behaviour and properties. Cement and Concrete Composites 111:103613. doi:10.1016/j.cemconcomp.2020.103613.
   Web of Science ®Google Scholar
• Friedrich, L. F., and C. Wang. 2016. Continuous modeling technique of fiber pullout from a cement matrix with different interface mechanical properties using finite element program. Latin American Journal of Solids and Structures 13 (10):1937–53. doi:10.1590/1679-78252575.
   Web of Science ®Google Scholar
• Isla, F., and B. Luccioni. 2014. Parámetros que Definen el Comportamiento del Hormigón Reforzado con Fibras. Mecánica Computacional 33 (18):1221–35. doi:10.4067/S0718-50732009000100004.
   Google Scholar
• Kosmatka, S., B. Kerkhoff, and W. Panarese. 2002. Design and control of concrete mixtures. Skokie, IL: Portland Cement Association.
   Google Scholar
• Leung, C. K. Y., and N. Shapiro. 1999. Optimal steel fiber strength for reinforcement of cementitious materials. Journal of Materials in Civil Engineering 11 (2):116–23. doi:10.1061/(ASCE)0899-1561199911:2116.
   Web of Science ®Google Scholar
• Li, Z., B. Mobasher, and S. P. Shah. 1991. Characterization of interfacial properties in fiber-reinforced cementitious composites. Journal of the American Ceramic Society 74 (9):2156–64. doi:10.1111/j.1151-2916.1991.tb08276.x.
   Web of Science ®Google Scholar
• Li, Y., K. L. Pickering, and R. L. Farrell. 2009. Determination of interfacial shear strength of white rot fungi treated hemp fibre reinforced polypropylene. Composites Science and Technology 69 (7–8):1165–71. doi:10.1016/j.compscitech.2009.02.018.
   Web of Science ®Google Scholar
• Mariscal Jiménez, J. G. 2001. Análisis de placas planas de fibrocemento en sección mixta con perfiles de acero. Tesis, Universidad Nacional de Colombia. https://repositorio.unal.edu.co/handle/unal/2598
   Google Scholar
• Mobasher, B., and C. Y. Li. 1995. Modeling of stiffness degradation of the interfacial zone during fiber debonding. Composites Engineering 5 (10–11):1349–65. doi:10.1016/0961-9526(95)00056-S.
   Web of Science ®Google Scholar
• Mori, S., C. Tenazoa, S. Candiotti, E. Flores, and S. Charca. 2018. Assessment of ichu fibers extraction and their use as reinforcement in composite materials. Journal of Natural Fibers 17 (5):700–15. doi:10.1080/15440478.2018.1527271.
   Web of Science ®Google Scholar
• Mori, S., C. Tenazoa, S. Candiotti, E. Flores, and S. Charca. 2020. Assessment of ichu fibers extraction and their use as reinforcement in composite materials. Journal of Natural Fibers 17 (5):700–15. doi:10.1080/15440478.2018.1527271.
   Web of Science ®Google Scholar
• Naaman, A. E., G. G. Namur, J. M. Alwan, and H. S. Najm. 1991. Fiber pullout and bond slip. ii: experimental validation. Journal of Structural Engineering 117 (9):2791–800. doi:10.1061/(ASCE)0733-9445(1991)117:9(2791).
   Web of Science ®Google Scholar
• NTP (Norma Técnica Peruana) 334.149. 2018. Cales: Cal hidratada para acabados. Instituto Nacional de Calidad, Peru.
   Google Scholar
• NTP (Norma Técnica Peruana) ISO 8336. 2017. Planchas planas de fibrocemento. Instituto Nacional de Calidad, Peru.
   Google Scholar
• Redon, C., V. C. Li, C. Wu, H. Hoshiro, T. Saito, and A. Ogawa. 2001. Measuring and modifying interface properties of PVA fibers in ECC matrix. Journal of Materials in Civil Engineering 13 (6):399–406. doi:10.1061/(ASCE)0899-1561(2001)13:6(399).
   Web of Science ®Google Scholar
• Tenazoa, C., S. Charca, and E. Flores. 2018. Estudio de la Interfase Entre las Fibras Endémicas del Perú y Matriz Cementicia aTravés de Pruebas de Arrancamiento (Pull Out). Lima: Universidad de Ingeniería y Tecnología.
   Google Scholar
• Tenazoa, C., H. Savastano, S. Charca, M. Quintana, and E. Flores. 2021. The effect of alkali treatment on chemical and physical properties of ichu and cabuya fibers. Journal of Natural Fibers 18 (7):923–36. doi:10.1080/15440478.2019.1675211.
   Web of Science ®Google Scholar
• Wang, Y., V. C. Li, and S. Backer. 1988. Modelling of fibre pull-out from a cement matrix. International Journal of Cement Composites and Lightweight Concrete 10 (3):143–49. doi:10.1016/0262-5075(88)90002-4.
   Google Scholar