A Comparative Study on Drill Tool Effect on Vibration and Delamination Characteristics of FRPs

References

• Abdul Nasir, A. A., A. I. Azmi, and A. N. M. Khalil. 2015. Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites. Measurement: Journal of the International Measurement Confederation 75:298–307. doi:10.1016/j.measurement.2015.07.046.
   Web of Science ®Google Scholar
• Abhishek, S., M. R. Sanjay, R. George, S. Siengchin, J. Parameswaranpillai, and C. Iulian Pruncu. 2018. Development of new hybrid phoenix pusilla/carbon/fish bone filler reinforced polymer composites. Journal of the Chinese Advanced Materials Society 6 (4):553–60. doi:10.1080/22243682.2018.1522599.
   Google Scholar
• Alias, M. A. A., A. Iskandar Azmi, C. Lih Tan, and M. Syamil Zakaria. 2021. Drilling performance of flax fibre epoxy composites: Induced thrust force and delamination damage analyses. Materials Today: Proceedings 41:51–55. doi:10.1016/j.matpr.2020.10.1002.
   Google Scholar
• Anarghya, A., D. N. Harshith, N. Rao, S. N. Nagaraj, B. M. Gurumurthy, V. N. Abhishek, and S. P. Ishwar Gouda. 2018. Thrust and torque force analysis in the drilling of aramid fibre-reinforced composite laminates using RSM and MLPNN-GA. Heliyon 4 (7):e00703. doi:10.1016/j.heliyon.2018.e00703.
   PubMed Web of Science ®Google Scholar
• Aravindh, S., and K. Umanath. 2015. Delamination in drilling of natural fibre reinforced polymer composites produced by compression moulding. Applied Mechanics and Materials 766–767 (June):796–800. doi:10.4028/amm.766-767.796.
   Google Scholar
• Basappa Khot, M., and M. Prasanna Kumar. 2021. Effect of tool material on thrust force and delamination in the drilling of coconut leaf sheath fibre reinforced polymer composites. Materials Today: Proceedings 47:5715–21. doi:10.1016/j.matpr.2021.05.061.
   Google Scholar
• Bisu, C., M. Cherif, and J. Yves Knevez. 2018. Dynamic analysis of the forced vibration drilling process. Procedia CIRP 67:290–95. doi:10.1016/j.procir.2017.12.215.
   Google Scholar
• Bonhin, E. P., S. David-Müzel, E. Siqueira Guidi, E. Cocchieri Botelho, and M. Valério Ribeiro. 2021. Influence of drilling parameters on thrust force and burr on fiber metal laminate (Al 2024-T3/Glass fiber reinforced epoxy). Procedia CIRP 101:338–41. doi:10.1016/j.procir.2021.02.035.
   Google Scholar
• Capello, E. 2004. Workpiece damping and its effect on delamination damage in drilling thin composite laminates. Journal of Materials Processing Technology 148 (2):186–95. doi:10.1016/S0924-0136(03)00812-4.
   Web of Science ®Google Scholar
• Choudhury, R., M. S. S. Mridusmita, and K. Debnath. 2018. Experimental investigations on drilling of lignocellulosic fiber reinforced composite laminates. Journal of Manufacturing Processes 34 (June 2017):51–61. doi:10.1016/j.jmapro.2018.05.032.
   Google Scholar
• Durão, L. M. P., J. M. R. S. Tavares, V. H. C. de Albuquerque, J. F. S. Marques, and O. N. G. Andrade. 2014. Drilling damage in composite material. Materials 7 (5):3802–19. doi:10.3390/ma7053802.
   PubMed Web of Science ®Google Scholar
• Edward Kennedy, Z., and M. Arul Inigo Raja. 2021. Influence of stacking sequence and hybridization on the mechanical and tribological properties of glass and jute fiber composites. Materials Today: Proceedings (xxxx):4–9. doi:10.1016/j.matpr.2021.06.294.
   Google Scholar
• Ficici, F. 2021. Investigation of thrust force in drilling polyphthalamide (PPA) composites. Measurement: Journal of the International Measurement Confederation 182 (March):109505. doi:10.1016/j.measurement.2021.109505.
   Google Scholar
• Ganesan, K., C. Kailasanathan, M. R. Sanjay, P. Senthamaraikannan, and S. S. Saravanakumar. 2020. A new assessment on mechanical properties of jute fiber mat with egg shell powder/nanoclay-reinforced polyester matrix composites. Journal of Natural Fibers 17 (4):482–90. doi:10.1080/15440478.2018.1500340.
   Web of Science ®Google Scholar
• Geier, N., J. P. Davim, and T. Szalay. 2019. Advanced cutting tools and technologies for drilling carbon fibre reinforced polymer (CFRP) composites: A review. Composites: Part A, Applied Science and Manufacturing 125 (July):105552. doi:10.1016/j.compositesa.2019.105552.
   Google Scholar
• Geier, N., J. P. Davim, and T. Szalay. 2019a. Advanced Cutting Tools and Technologies for Drilling Carbon Fibre Reinforced Polymer (CFRP) Composites: A Review. Composites. Part A, Applied Science and Manufacturing 125 (July):105552. doi:10.1016/j.compositesa.2019.105552.
   Google Scholar
• Gemi, L., U. Köklü, Ş. Yazman, and S. Morkavuk. 2020. The effects of stacking sequence on drilling machinability of filament wound hybrid composite pipes: Part-1 mechanical characterization and drilling tests. Composites Part B: Engineering 186 (January). doi:10.1016/j.compositesb.2020.107787.
   Web of Science ®Google Scholar
• Girijappa, T., Y. Gowda, S. Mavinkere Rangappa, J. Parameswaranpillai, and S. Siengchin. 2019. Natural fibers as sustainable and renewable resource for development of eco-friendly composites: A comprehensive review. Frontiers in Materials. Frontiers Media S.A. doi:10.3389/fmats.2019.00226.
   Web of Science ®Google Scholar
• Hemath, M., S. Mavinkere Rangappa, V. Kushvaha, H. Nath Dhakal, and S. Siengchin. 2020. A comprehensive review on mechanical, electromagnetic radiation shielding, and thermal conductivity of fibers/inorganic fillers reinforced hybrid polymer composites. Polymer Composites 41 (10):3940–65. doi:https://doi.org/10.1002/pc.25703. John Wiley and Sons Inc.
   Web of Science ®Google Scholar
• Ho-Cheng, H., and C. K. H. Dharan. 1990. Delamination during drilling in composite laminates. Journal of Manufacturing Science and Engineering, Transactions of the ASME 112 (3):236–39. doi:10.1115/1.2899580.
   Google Scholar
• Jagadeesh, P., Y. Gowda Thyavihalli Girijappa, M. Puttegowda, S. Mavinkere Rangappa, and S. Siengchin. 2020. Effect of natural filler materials on fiber reinforced hybrid polymer composites: An overview. Journal of Natural Fibers 1–16. doi:10.1080/15440478.2020.1854145. Bellwether Publishing, Ltd.
   Google Scholar
• Jain, A., C. Sandesh Kumar, and Y. Shrivastava. 2021. Fabrication and machining of fiber matrix composite through electric discharge machining: A short review. Materials Today: Proceedings (xxxx):1–5. doi:10.1016/j.matpr.2021.07.288.
   PubMedGoogle Scholar
• Karthikeyan, K., M. Nagamadhu, M. Jaiprakash, Kiran, and M. Shariff. 2019. Effect of drilling parameters on natural fiber reinforced with chaired epoxy poly urethane foam composites using grey relational analysis. Materials Today: Proceedings 24:2193–203. doi:10.1016/j.matpr.2020.03.677.
   Google Scholar
• Kimmelmann, M., J. Duntschew, I. Schluchter, and H. C. Möhring. 2019. Analysis of burr formation mechanisms when drilling CFRP-aluminium stacks using acoustic emission. Procedia Manufacturing 40 (2019):64–69. doi:10.1016/j.promfg.2020.02.012.
   Google Scholar
• Kumar, D., and K. K. Sing. 2017. Experimental analysis of delamination, thrust force and surface roughness on drilling of glass fibre reinforced polymer composites material using different drills. Materials Today: Proceedings 4 (8):7618–27. doi:10.1016/j.matpr.2017.07.095.
   Google Scholar
• Kyratsis, P., A. P. Markopoulos, N. Efkolidis, V. Maliagkas, and K. Kakoulis. 2018. Prediction of thrust force and cutting torque in drilling based on the response surface methodology. Machines 6 (2). doi:10.3390/MACHINES6020024.
   Web of Science ®Google Scholar
• Lotfi, A., H. Li, and D. Viet Dao. 2020. Drilling behavior of flax/poly(lactic acid) bio-composite laminates: An experimental investigation. Journal of Natural Fibers 17 (9):1264–80. doi:10.1080/15440478.2018.1558158.
   Web of Science ®Google Scholar
• Maleki, R., M. H. Hadi, M. Kubouchi, and Y. Arao. 2019. Experimental study on drilling of jute fiber reinforced polymer composites. Journal of Composite Materials 53 (3):283–95. doi:10.1177/0021998318782376.
   Web of Science ®Google Scholar
• Nagaraja, R., and T. Rangaswamy. 2020. Drilling of CFRP G-833 composite laminates to evaluate the performance of K20 and one shot solid carbide step drill K44. AIP Conference Proceedings 2247 (July). doi:10.1063/5.0004830.
   Google Scholar
• Panneerselvam, T., S. Raghuraman, T. K. Kandavel, and K. Mahalingam. 2020. Evaluation and analysis of delamination during drilling on sisal-glass fibres reinforced polymer. Measurement: Journal of the International Measurement Confederation 154:107462. doi:10.1016/j.measurement.2019.107462.
   Web of Science ®Google Scholar
• Rajesh, M., and J. Pitchaimani. 2018. Dynamic mechanical and free vibration behavior of natural fiber braided fabric composite: Comparison with conventional and knitted fabric composites. Polymer Composites 39 (7):2479–89. doi:10.1002/pc.24234.
   Web of Science ®Google Scholar
• Rakesh, P. K., I. Singh, and D. Kumar. 2012. Drilling of composite laminates with solid and hollow drill point geometries. Journal of Composite Materials 46 (25):3173–80. doi:10.1177/0021998312436997.
   Web of Science ®Google Scholar
• Ramesh, M., C. Deepa, L. Rajesh Kumar, M. R. Sanjay, and S. Siengchin. 2020. Life-cycle and environmental impact assessments on processing of plant fibres and its bio-composites: A critical review. Journal of Industrial Textiles. SAGE Publications Ltd. doi:10.1177/1528083720924730.
   Web of Science ®Google Scholar
• Sanjay, M. R., P. Madhu, M. Jawaid, P. Senthamaraikannan, S. Senthil, and S. Pradeep. 2018. Characterization and properties of natural fiber polymer composites: a comprehensive review. Journal of Cleaner Production 172: 566–81. doi:https://doi.org/10.1016/j.jclepro.2017.10.101.
   Web of Science ®Google Scholar
• Sankar, B., P. U. Ravi, A. V. Avinash Reddy, and P. Koushik Kumar. 2014. Drilling of composite materials: A review. Journal of Basic and Applied Engineering Research 1 (2):19–23. https://www.krishisanskriti.org/vol_image/02Jul20150307046.pdf.
   Google Scholar
• Sankar, B. R., P. Umamaheswarrao, A. V. Avinash Reddy, and P. Koushik Kumar. 2014. Drilling of composite laminates-A review. 1 (3):19–24. http://www.krishisanskriti.org/jbaer.html.
   Google Scholar
• Shadrach Jeya Sekaran, A., and K. Palani Kumar. 2019. Study on drilling of woven sisal and aloevera natural fibre polymer composite. Materials Today: Proceedings 16:640–46. doi:10.1016/j.matpr.2019.05.140.
   Google Scholar
• Singh, A. P., M. Sharma, and I. Singh. 2013. A review of modeling and control during drilling of fiber reinforced plastic composites. Composites Part B: Engineering 47:118–25. doi:10.1016/j.compositesb.2012.10.038.
   Web of Science ®Google Scholar
• Vinay, S. S., M. R. Sanjay, S. Siengchin, and C. V. Venkatesh. 2021. Effect of Al2O3 nanofillers in basalt/epoxy composites: mechanical and tribological properties. Polymer Composites 42 (4):1727–40. doi:10.1002/pc.25927.
   Web of Science ®Google Scholar
• Vinayagamoorthy, R., V. Konda, P. Tonge, T. Nikhil Koteshwar, and M. Premkumar. 2019. Surface roughness analysis and optimization during drilling on chemically treated natural fiber composite. Materials Today: Proceedings 16:567–73. doi:10.1016/j.matpr.2019.05.129.
   Google Scholar
• Vinod, A., M. R. Sanjay, S. Suchart, and P. Jyotishkumar. 2020. Renewable and sustainable biobased materials: An assessment on biofibers, biofilms, biopolymers and biocomposites. Journal of Cleaner Production 258: 120978. doi:https://doi.org/10.1016/j.jclepro.2020.120978.
   Web of Science ®Google Scholar
• Wang, D., P. Y. Onawumi, S. O. Ismail, H. N. Dhakal, I. Popov, V. V. Silberschmidt, and A. Roy. 2019. Machinability of natural-fibre-reinforced polymer composites: Conventional vs ultrasonically-assisted machining. Composites: Part A, Applied Science and Manufacturing 119 (June 2018):188–95. doi:10.1016/j.compositesa.2019.01.028.
   Google Scholar
• Zitoune, R., L. Crouzeix, F. Collombet, T. Tamine, and Y. H. Grunevald. 2011. Behaviour of composite plates with drilled and moulded hole under tensile load. Composite Structures 93 (9):2384–91. doi:10.1016/j.compstruct.2011.03.027.
   Web of Science ®Google Scholar