Water Absorption Behavior of Jute Fibers Reinforced HDPE Biocomposites: Prediction Using RSM and ANN Modeling

References

• AbdElbaky, M. A., and M. A. Attia. 2019. Water absorption effect on the in-plane shear properties of jute–glass–carbon-reinforced composites using Iosipescu test. Journal of Composite Materials 53:3033–45. doi:10.1177/0021998318809525.
   Google Scholar
• Adda, B., A. Belaadi, M. Boumaaza, and M. Bourchak. 2021. Experimental investigation and optimization of delamination factors in the drilling of jute fiber–reinforced polymer biocomposites with multiple estimators. The International Journal of Advanced Manufacturing Technology (116):2885–907. doi:10.1007/s00170-021-07628-9.
   Google Scholar
• Adeniyi, A. G., J. O. Ighalo, and G. Marques. 2020. Utilisation of Machine Learning Algorithms for the Prediction of Syngas Composition from Biomass Bio-Oil Steam Reforming.”International. Journal of Sustainable Energy 40 (4):310–25. doi:10.1080/14786451.2020.1803862.
   Web of Science ®Google Scholar
• Adeyi, A. J., M. O. Durowoju, and O. Adeyi. 2018. Experimental Studies and Artificial Neural Networks (ANN) Modeling of Moisture Absorption Characteristics of Polyester/Momodical Fibre Reinforced Composite. International Journal of Mechanical Engineering and Technology International Journal of Mechanical Engineering and Technology 9 (11):1453–67.
   Google Scholar
• Ali, A., K. Shaker, Y. Nawab, M. Ashraf, A. Basit, S. Shahid, and M. Umair. 2015. Impact of hydrophobic treatment of jute on moisture regain and mechanical properties of compositematerial. Journal of Reinforced Plastics and Composites 34:2059–2068. doi:10.1177/0731684415610007.
   Web of Science ®Google Scholar
• Amroune, S., A. Belaadi, M. Bourchak, A. Makhlouf, and H. Satha. 2020a. Statistical and experimental analysis of the mechanical properties of flax fibers. Journal of Natural Fibers. doi:10.1080/15440478.2020.1775751.
   Google Scholar
• Amroune, S., A. Belaadi, R. Dalmis, Y. Seki, A. Makhlouf, and H. Satha. 2020b. Quantitatively Investigating the effects of fiber parameters on tensile and flexural response of flax/epoxy biocomposites. Journal of Natural Fibers. doi:10.1080/15440478.2020.1817831.
   Web of Science ®Google Scholar
• Balart, R., N. Montanes, F. Dominici, T. Boronat, and S. Torres-Giner. 2020. Environmentally Friendly Polymers and Polymer Composites. Materials 13:4892. doi:10.3390/ma13214892.
   PubMed Web of Science ®Google Scholar
• Balcıoglu, H. E., A. C. Seckin, and M. Aktas. 2016. Failure load prediction of adhesively bonded pultruded composites using artificial neural network. Journal of Natural Fibers 50 (23):3267–81. doi:10.1177/0021998315617998.
   Google Scholar
• Bazan, P., D. Mierzwinski, R. Bogucki, and S. Kuciel. 2020. Bio-Based Polyethylene Composites with NaturalFiber: Mechanical, Thermal, and Ageing Properties. Materials 13 (11). doi: 10.3390/ma13112595.
   Web of Science ®Google Scholar
• Belaadi, A., S. Amroune, and M. Bourchak. 2019. Effect of eco-friendly chemical sodium bicarbonate treatment on the mechanical properties of flax fibres: Weibull statistics. International Journal of Advanced Manufacturing Technology 106:1753–74. doi:10.1007/s00170-019-04628-8.
   Web of Science ®Google Scholar
• Belaadi, A., M. Boumaaza, S. Amroune, and M. Bourchak. 2020. Mechanical characterization and optimization of delamination factor in drilling bidirectional jute fibre-reinforced polymer biocomposites. International Journal of Advanced Manufacturing International Journal of Advanced Manufacturing Technology 111:2073–94. doi:10.1007/s00170-020-06217-6.
   Web of Science ®Google Scholar
• Belahcen, D., W. Zouari, M. Assarar, and A. Rezak. 2021. Analysis of the hygroscopic and hygroelastic behaviours of water aged flax-epoxy composite. Composite Structures 265 113692. doi:10.1016/j.compstruct.2021.113692.
   Web of Science ®Google Scholar
• Benzannache, N., A. Belaadi, M. Boumaaza, and M. Bourchak. 2020. Improving the Mechanical Performance of biocomposite Plaster/Washingtonian filifira Fibres Using the RSM Method. Journal of Building Engineering Journal of Building Engineering 33:101840. doi:10.1016/j.jobe.2020.101840.
   Web of Science ®Google Scholar
• Boumaaza, M., A. Belaadi, and M. Bourchak. 2021. The Effect of Alkaline Treatment on Mechanical Performance of Natural Fibers-Reinforced Plaster: Part II Optimization Comparison between ANN and RSM Statistics. Journal of Natural Fibers 1–16. doi:10.1080/15440478.2021.1964129.
   Google Scholar
• Boumaaza, M., A. Belaadi, M. Bourchak, M. Jawaid, and H. Satha. 2022. Comparative study of flexural properties prediction of Washingtonia filifera rachis biochar bio-mortar by ANN and RSM models. Construction and Building Materials 318:125985. doi:10.1016/j.conbuildmat.2021.125985.
   Web of Science ®Google Scholar
• Bourmaud, A., and C. Baley. 2009. Rigidity analysis of polypropylene/vegetal fibre composites after recycling. Polymer Degradation and Stability Polymer Degradation and Stability 94 (3):297–305. doi:10.1016/j.polymdegradstab.2008.12.010.
   Web of Science ®Google Scholar
• Chand, N., and M. Fahim. 2020. Jute reinforced polymer composites, Editor(s): Navin Chand, Mohammed Fahim, In Woodhead Publishing Series in Composites Science and Engineering, Tribology of natural fiber polymer composites. Woodheadpublishing. 2008, Pages 108-128, ISBN 9781845693930, https://doi.org/10.1533/9781845695057.108. (https://www.sciencedirect.com/science/article/pii/B978184569393050004X)
   Google Scholar
• Cheng, M., Y. Zhong, U. Kureemun, D. Cao, H. Hu, H. P. Lee, and S. Li. 2020. Environmental Durability of Carbon/Flax Fiber Hybrid Composites. Composite Structures 234:111719. doi:10.1016/j.compstruct.2019.111719.
   Web of Science ®Google Scholar
• Cherief, M., A. Belaadi, M. Boumaaza, and M. Bourchak. 2021. The Effect of Geometry on the Flexural Properties of Cellular Structures Reinforced with Natural Fibres: Statistical Approach. Journal of Natural 0:1–15. doi:10.1080/15440478.2021.1964134.
   Google Scholar
• Chilali, A., M. Assarar, W. Zouari, H. Kebir, and R. Ayad. 2017. Effect of geometric dimensions andfibre orientation on 3D moisture diffusion in flax fibre reinforced thermoplastic and thermosetting composites. Composites Part A: Applied Science and Manufacturing: Applied Science and Manufacturing 95:75–86. doi:10.1016/j.compositesa.2016.12.020.
   Web of Science ®Google Scholar
• Chong, T. Y., M. C. Law, and Y. S. Chan. 2021. The Potentials of Corn Waste Lignocellulosic Fibreas an Improved Reinforced Bioplastic Composites. Journal of Polymers and the Environment 29:363–81. doi:10.1007/s10924-020-01888-4.
   Web of Science ®Google Scholar
• DeMuth, P. C., Y. Min, B. Huang, J. A. Kramer, A. D. Miller, D. H. Barouch, P. T. Hammond, and D. J. Irvine. 2013. Polymer multilayer tattooing for enhanced DNA vaccination. Nature Materials 12:367–76. doi:10.1038/nmat3550.
   PubMed Web of Science ®Google Scholar
• Djellouli, B., W. Zouari, M. Assarar, and R. Ayad. 2021. Analysis of the hygroscopic and hygroelastic behaviours of water aged flax-epoxy composite. Composite Structures 265:113692. doi:10.1016/j.compstruct.2021.113692.
   Web of Science ®Google Scholar
• Doan, T. T. L., H. Brodowsky, and E. Mader. 2007. Jute fibre/polypropylene composites II. Thermal, hydrothermal and dynamic mechanical behaviour. Composites Science and Technology 67:2707–14. doi:10.1016/j.compscitech.2007.02.011.
   Web of Science ®Google Scholar
• Edhirej, A., S. M. Sapuan, M. Jawaid, and N. I. Zahari. 2017. Cassava/sugar palm fiber reinforced cassava starch hybrid composites: Physical, thermal and structural properties. International Journal of Biological Macromolecules Journal of Biological Macromolecules 101:75–83. doi:10.1016/j.ijbiomac.2017.03.045.
   PubMed Web of Science ®Google Scholar
• Englund, K. 2009. Tribology of natural fiber polymer composites. Materials Today Materials Today 12 (45). doi: 10.1016/S1369-7021(09)70093-8.
   Google Scholar
• Ighalo, J. O., C. A. Igwegbe, A. G. Adeniyi, and S. A. Abdulkareem. 2021. Artificial Neural Network Modeling of the Water Absorption Behavior of Plantain Peel and Bamboo Fibers Reinforced Polystyrene Composites. Journal of Macromolecular Science, Part B, Physics, Part B, Physics 60 (7):472–84. doi:10.1080/00222348.2020.1866282.
   Web of Science ®Google Scholar
• Kumar, S., V. K. Patel, K. K. S. Mer, B. Gangil, T. Singh, and G. Fekete. 2019. Himalayan natural fiber-reinforced epoxy composites: Effect of grewiaoptiva/bauhinia vahlii fibers on physico-mechanical and dry sliding wear behavior. Journal of Natural Fibers 1–11. doi:10.1080/15440478.2019.1612814.
   Google Scholar
• Macedo, M. N., J. J. Galo, L. A. L. De Almeida, and A. D. C. Lima. 2015. Demand side management using artificial neural networks in a smart grid environment. Renewable and Sustainable Energy Reviews 41:128–33. doi:10.1016/j.rser.2014.08.035.
   Web of Science ®Google Scholar
• Makhlouf, A., A. Belaadi, S. Amroune, M. Bourchak, and H. Satha. 2020. Elaboration and Characterization of Flax Fiber Reinforced High Density Polyethylene Biocomposite: Effect of the Heating Rate on Thermo-mechanical Properties. Journal of Natural Fibers. doi:10.1080/15440478.2020.1848737.
   Web of Science ®Google Scholar
• Mazaheri, H., M. Ghaedi, A. M. H. Ahmadi, and A. Asfaram. 2017. Application of Machine/Statistical Learning, Artificial Intelligence and Statistical Experimental Design for the Modeling and Optimization of Methylene Blue and CD (II) Removal from a Binary Aqueous Solution by Natural Walnut Carbon. Physical Chemistry Chemical hysics.19. doi:10.1039/c6cp08437k.
   PubMed Web of Science ®Google Scholar
• Mohanty, A. K., M. Misra, and L. T. Drzal. 2005. Natural fibers, biopolymers, and biocomposites. Edited ByAmar K. Mohanty, Manjusri Misra, Lawrence T. Drzal Edition1st Edition First Published2005 eBook Published: 8 April 2005. Boca Raton Imprint: CRC Press 896 9780429211607. https://doi.org/10.1201/9780203508206
   Google Scholar
• Murat, Y. S., and H. Ceylan. 2006. Use of artificial neural networks for transport energy demand modeling. Energy Policy 34 (17):3165–72. doi:10.1016/j.enpol.2005.02.010.
   Web of Science ®Google Scholar
• Ochi, S. 2006. Development of high strength biodegradable composites using Manila hemp fiber and starch-based biodegradable resin.”Composites Part A. Applied Science and Manufacturing 37:1879–83. doi:10.1016/j.compositesa.2005.12.019.
   Web of Science ®Google Scholar
• Pickering, K. L., M. A. Efendy, and T. M. Le. 2016. A review of recent developments in natural fibre composites and their mechanical performance. Composites Part A: Applied Science and Manufacturing: Applied Science and Manufacturing 83:98–112. doi:10.1016/j.compositesa.2015.08.038.
   Web of Science ®Google Scholar
• Pujari, S., A. Ramakrishna, and K. B. Padal. 2017. Prediction of Swelling Behaviour of Jute and Banana Fiber Composites by Using ANN and Regression Analysis. Materials Today Proceedings 4 (8):8548–57. doi:10.1016/j.matpr.2017.07.201.
   Google Scholar
• Ramakrishnan, S., K. Krishnamurthy, G. Rajeshkumar, et al. 2021. Dynamic Mechanical Properties and Free Vibration Characteristics of Surface Modified Jute Fiber/Nano-Clay Reinforced Epoxy Composites. Journal Polymer Environment 29:1076–88. doi:10.1007/s10924-020-01945-y.
   Web of Science ®Google Scholar
• Ravikumar, P., A. R. Suresh, and G. Rajeshkumar. 2022. An Investigation into the Tribological Properties of Bidirectional Jute/Carbon Fiber Reinforced Polyester Hybrid Composites. Journal of Natural Fibers 19 (3):943–53. doi:10.1080/15440478.2020.1764444.
   Web of Science ®Google Scholar
• Safa, M., and S. Samarasinghe. 2011. Determination and modelling of energy consumption in wheat production using neural networks: A case study in Canterbury province, New Zealand. Energy 5140–47. doi:10.1016/j.energy.2011.06.016.
   Google Scholar
• Saidane, E. H., D. Scida, M. Assarar, and R. Ayad. 2016. Assessment of 3D Moisture Diffusion Parameters on Flax/Epoxy Composites. Composites Part A: Applied Science and Manufacturing 80:53–60. doi:10.1016/j.compositesa.2015.10.008.
   Web of Science ®Google Scholar
• Senthamaraikannan, P., M. R. Sanjay, K. S. Bhat, N. H. Padmaraj, and M. Jawaid. 2018. Characterization of natural cellulosic fiber from bark of Albiziaamara. Journal of Natural Fibers 16 (8):1124–31. doi:10.1080/15440478.2018.1453432.
   Web of Science ®Google Scholar
• Tabet, Z., A. Belaadi, M. Boumaaza, and M. Bourchak. 2021. Drilling of a bidirectional jute fibre and cork-reinforced polymer biosandwich structure : ANN and RSM approaches for modelling and optimization. International Journal of Advanced Manufacturing Technology Journal of Advanced Manufacturing Technology 117:3819–39. doi:10.1007/s00170-021-07679-y.
   Web of Science ®Google Scholar
• Thirugnanasambandham, K., V. Sivakumar, and J. P. Maran. 2015. Microwave-Assisted extraction of polysaccharides from mulberry leaves. International Journal of Biological Macromolecules 72:1–5. doi:10.1016/j.ijbiomac.2014.07.031.
   PubMed Web of Science ®Google Scholar
• Venkateshwaran, N., A. ElayaPerumal, A. Alavudeen, and M. Thiruchitrambalam. 2011. Mechanical and water absorption behaviour of banana/sisal reinforced hybrid composites. Materials & Design Design 32 (7):4017–21. doi:10.1016/j.matdes.2011.03.002.
   Web of Science ®Google Scholar
• Wang, X., Y. Li, Y. Yan, E. Wright, N. Gao, and G. Chen. 2020. Prediction on the viscosity and thermal conductivity of hfc/hfo refrigerants with artificial neural network models. International Journal of Refrigeration Journal of Refrigeration 119:316–25. doi:10.1016/j.ijrefrig.2020.07.006.
   Web of Science ®Google Scholar
• Yan, L., N. Chouw, and K. Jayaraman. 2014. Flax fibreand its composites – a review. Composites Part B 56:296–317. doi:10.1016/j.compositesb.2013.08.014.
   Web of Science ®Google Scholar
• Yang, J., Y. C. Ching, and C. H. Chuah. 2019. Applications of lignocellulosic fibers and lignin in bioplastics: A review. Polymers 11 (5):751. doi:10.3390/polym11050751.
   PubMed Web of Science ®Google Scholar
• Yen, T., C. Ming, C. Law, and Y. San. 2021. The Potentials of Corn Waste Lignocellulosic Fibre as an Improved Reinforced Bioplastic Composites. Journal of Polymers and the Journal of Polymers and the Environment 29:363–81. doi:10.1007/s10924-020-01888-4.
   Web of Science ®Google Scholar
• Yokoyama, R., T. Wakui, and R. Satake. 2009. Prediction of energy demands using neural network with model identification by global optimization. Energy Conversion and Management 50 (2):319–27. doi:10.1016/j.enconman.2008.09.017.
   Web of Science ®Google Scholar
• Zhu, S., and S. Heddam. 2020. Prediction of Dissolved Oxygen in Urban Rivers at the Three Gorges Reservoir, China: Extreme Learning Machines (ELM) versus Artificial Neural Network (ANN). Water Quality Research Journal 55 (1):106–18. doi:10.2166/wqrj.2019.053.
   Web of Science ®Google Scholar