Tribological Behaviors of Natural Fiber Reinforced Nanofilled Polyurea Matrix Composites at High Temperatures

References

• Ashik, K. P., R. S. Sharma, and N. Raghavendra. 2017. Evaluation of tensile, modal and fracture properties of jute/epoxy natural composites with addition of silicon Di oxide as filler material. Materials Today: Proceedings 4 (9):9586–21. doi:10.1016/j.matpr.2017.06.229.
   Google Scholar
• ASTM G 99–95a Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus. 2000. Annual book of ASTM standards. West Conshohocken, United States: American Society for Testing and Materials.
   Google Scholar
• Casalini, R., R. Bogoslovov, S. B. Qadri, and C. M. Roland. 2012. Nanofiller reinforcement of elastomeric polyurea. Polymer 53 (6):1282–87. doi:10.1016/j.polymer.2012.01.034.
   Web of Science ®Google Scholar
• Chang, L., and K. Friedrich. 2010. Enhancement effect of nanoparticles on the sliding wear of short fiber-reinforced polymer composites: A critical discussion of wear mechanisms. Tribology International 43 (12):2355–64. doi:10.1016/j.triboint.2010.08.011.
   Web of Science ®Google Scholar
• Chang, L., and Z. Zhang. 2006. Tribological properties of epoxy nanocomposites: Part II. A combinative effect of short carbon fibre with nano-TiO2. Wear 260 (7–8):869–78. doi:10.1016/j.wear.2005.04.002.
   Web of Science ®Google Scholar
• Chaudhary, V., P. K. Bajpai, and S. Maheshwari. 2018. An investigation on wear and dynamic mechanical behavior of jute/hemp/flax reinforced composites and its hybrids for tribological applications. Fibers and Polymers 19 (2):403–15. doi:10.1007/s12221-018-7759-6.
   Web of Science ®Google Scholar
• Erdoğdu, Y. E. 2020. Investigation of the mechanical and tribological behaviors of natural fiber reinforced particle filled polymer matrix composites. [In Turkish]. PhD diss., Inonu University.
   Google Scholar
• Erdoğdu, Y. E., E. E. Korkmaz, and Ş. Temiz. 2021. Effect of graphene nanoplatelet filling on mechanical properties of natural fiber reinforced polymer composites. Materials Testing 63 (4):322–28. doi:10.1515/mt-2020-0046.
   Web of Science ®Google Scholar
• Erdoğdu, Y. E., and Ş. Temiz. 2021. Abrasive wear on natural fiber reinforced graphene nanoplatelets filled epoxy matrix composites. Journal of the Institute of Science and Technology 11 (1):440–49. In Turkish. doi:10.21597/jist.811215.
   Google Scholar
• George, J., R. Janardhan, J. S. Anand, S. S. Bhagawan, and S. Thomas. 1996. Melt rheological behaviour of short pineapple fibre reinforced low density polyethylene composites. Polymer 37 (24):5421–31. doi:10.1016/S0032-3861(96)00386-2.
   Web of Science ®Google Scholar
• Gu, Y., X. Tan, Z. Yang, and Z. Zhang. 2014. Hot compaction and mechanical properties of ramie fabric/epoxy composite fabricated using vacuum assisted resin infusion molding. Materials & Design (1980-2015) 56:852–61. doi:10.1016/j.matdes.2013.11.077.
   Web of Science ®Google Scholar
• Hashmi, S. A. R., U. K. Dwivedi, and N. Chand. 2007. Graphite modified cotton fibre reinforced polyester composites under sliding wear conditions. Wear 262 (11–12):1426–32. doi:10.1016/j.wear.2007.01.014.
   Web of Science ®Google Scholar
• Hu, H., S. Yu, M. Wang, J. Ma, and K. Liu. 2009. Tribological properties of epoxy/polyurea composite. Polymers for Advanced Technologies 20 (9):748–52. doi:10.1002/pat.1347.
   Web of Science ®Google Scholar
• Iqbal, N., M. Tripathi, S. Parthasarathy, D. Kumar, and P. K. Roy. 2016. Polyurea coatings for enhanced blast-mitigation: A review. RSC advances 6 (111):109706–17. doi:10.1039/C6RA23866A.
   Web of Science ®Google Scholar
• Iqbal, N., M. Tripathi, S. Parthasarathy, D. Kumar, and P. K. Roy. 2018. Aromatic versus aliphatic: Hydrogen bonding pattern in chain‐extended high‐performance polyurea. Chemistry Select 3 (7):1976–82. doi:10.1002/slct.201703176.
   Google Scholar
• Jawaid, M., H. A. Khalil, A. Hassan, R. Dungani, and A. Hadiyane. 2013. Effect of jute fibre loading on tensile and dynamic mechanical properties of oil palm epoxy composites. Composites Part B: Engineering 45 (1):619–24. doi:10.1016/j.compositesb.2012.04.068.
   Web of Science ®Google Scholar
• Jiang, Z., and Z. Zhang. 2013. Wear of Multi-Scale Phase Reinforced Composites. In Tribology of nanocomposites, ed. J. P. Davim, 79–100. Berlin Heidelberg: Springer.
   Google Scholar
• Job, S., P. Mativenga, N. A. Shuaib, G. Oliveux, G. Leeke, and S. Pickering. 2016. Composites Recycling - where are we now?. United Kingdom: Composites UK.
   Google Scholar
• Joseph, P. V., K. Joseph, S. Thomas, C. K. S. Pillai, V. S. Prasad, G. Groeninckx, and M. Sarkissova. 2003. The thermal and cystallisation studies of short sisal fibre reinforced polypropylene composites. Composites Part A, Applied Science and Manufacturing 34 (3):253–66. doi:10.1016/S1359-835X(02)00185-9.
   Web of Science ®Google Scholar
• Joshi, S. V., L. T. Drzal, A. K. Mohanty, and S. Arora. 2004. Are natural fiber composites environmentally superior to glass fiber reinforced composites? Composites Part A, Applied Science and Manufacturing 35 (3):371–76. doi:10.1016/j.compositesa.2003.09.016.
   Web of Science ®Google Scholar
• Kabir, M. M., H. Wang, K. T. Lau, and F. Cardona. 2012. Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview. Composites Part B: Engineering 43 (7):2883–92. doi:10.1016/j.compositesb.2012.04.053.
   Web of Science ®Google Scholar
• Kavitha, M. K., L. Rolland, L. Johnson, H. John, and M. K. Jayaraj. 2020. Visible light responsive superhydrophilic TiO2/reduced graphene oxide coating by vacuum-assisted filtration and transfer method for self-cleaning application. Materials Science in Semiconductor Processing 113:105011. doi:10.1016/j.mssp.2020.105011.
   Web of Science ®Google Scholar
• Kazemi‐khasragh, E., F. Bahari‐sambran, S. M. H. Siadati, R. Eslami‐farsani, and S. Arbab Chirani. 2019. The effects of surface‐modified graphene nanoplatelets on the sliding wear properties of basalt fibers‐reinforced epoxy composites. Journal of Applied Polymer Science 136 (39):47986. doi:10.1002/app.47986.
   Web of Science ®Google Scholar
• Kazemi-Khasragh, E., F. Bahari-Sambran, C. Platzer, and R. Eslami-Farsani. 2020. The synergistic effect of graphene nanoplatelets–montmorillonite hybrid system on tribological behavior of epoxy-based nanocomposites. Tribology International 151:106472. doi:10.1016/j.triboint.2020.106472.
   Web of Science ®Google Scholar
• Kishore, M., M. Amrita, and B. Kamesh. 2021. Tribological properties of basalt-jute hybrid composite with graphene as nanofiller. Materials Today: Proceedings 43:244–49. doi:10.1016/j.matpr.2020.11.654.
   Google Scholar
• Kokta, B. V., D. Maldas, C. Daneault, and P. Beland. 1990. Composites of polyvinyl chloride-wood fibers. I. effect of isocyanate as a bonding agent. Polymer-Plastics Technology and Engineering 29 (1–2):87–118. doi:10.1080/03602559008049836.
   Web of Science ®Google Scholar
• Li, M., Y. Pu, V. M. Thomas, C. G. Yoo, S. Ozcan, Y. Deng, K. Nelson, and A. J. Ragauskas. 2020. Recent advancements of plant-based natural fiber–reinforced composites and their applications. Composites Part B: Engineering 200:108254. doi:10.1016/j.compositesb.2020.108254.
   Web of Science ®Google Scholar
• Mohammed, L., M. N. Ansari, G. Pua, M. Jawaid, and M. S. Islam. 2015. A review on natural fiber reinforced polymer composite and its applications. International Journal of Polymer Science 2015:1–15. 243947. doi:10.1155/2015/243947.
   Web of Science ®Google Scholar
• Mohan, N., S. Natarajan, and S. P. Kumaresh Babu. 2011. Sliding wear behavior of graphite filled glass-epoxy composites at elevated temperatures. Polymer-Plastics Technology and Engineering 50 (3):251–59. doi:10.1080/03602559.2010.531606.
   Web of Science ®Google Scholar
• Nirmal, U., J. Hashim, and K. O. Low. 2012. Adhesive wear and frictional performance of bamboo fibres reinforced epoxy composite. Tribology International 47:122–33. doi:10.1016/j.triboint.2011.10.012.
   Web of Science ®Google Scholar
• Pandita, S. D., X. Yuan, M. A. Manan, C. H. Lau, A. S. Subramanian, and J. Wei. 2014. Evaluation of jute/glass hybrid composite sandwich: Water resistance, impact properties and life cycle assessment. Journal of Reinforced Plastics and Composites 33 (1):14–25. doi:10.1177/0731684413505349.
   Web of Science ®Google Scholar
• Pinto, M. A., V. B. Chalivendra, Y. K. Kim, and A. F. Lewis. 2013. Effect of surface treatment and Z-axis reinforcement on the interlaminar fracture of jute/epoxy laminated composites. Engineering Fracture Mechanics 114:104–14. doi:10.1016/j.engfracmech.2013.10.015.
   Web of Science ®Google Scholar
• Saheb, D. N., and J. P. Jog. 1999. Natural fiber polymer composites: A review. Advances in Polymer Technology: Journal of the Polymer Processing Institute 18 (4):351–63. doi:10.1002/(SICI)1098-2329(199924)18:4<351:AID-ADV6>3.0.CO;2-X.
   Web of Science ®Google Scholar
• Samiee, A., A. V. Amirkhizi, and S. Nemat-Nasser. 2013. Numerical study of the effect of polyurea on the performance of steel plates under blast loads. Mechanics of Materials 64:1–10. doi:10.1016/j.mechmat.2013.03.008.
   Web of Science ®Google Scholar
• Sathish, S., N. Karthi, L. Prabhu, S. Gokulkumar, D. Balaji, N. Vigneshkumar, T. S. Ajeem Farhan, A. AkilKumar, and V. P. Dinesh. 2021. A review of natural fiber composites: Extraction methods, chemical treatments and applications. Materials Today: Proceedings 45 (9):8017–23. doi:10.1016/j.matpr.2020.12.1105.
   Google Scholar
• Sgriccia, N., M. C. Hawley, and M. Misra. 2008. Characterization of natural fiber surfaces and natural fiber composites. Composites Part A, Applied Science and Manufacturing 39 (10):1632–37. doi:10.1016/j.compositesa.2008.07.007.
   Web of Science ®Google Scholar
• Sinha, S. K., and B. J. Briscoe. 2009. Polymer Tribology. Singapore: World Scientific.
   Google Scholar
• Vigneshwaran, S., R. Sundarakannan, K. M. John, R. D. J. Johnson, K. A. Prasath, S. Ajith, V. Arumugaprabu, and M. Uthayakumar. 2020. Recent advancement in the natural fiber polymer composites: A comprehensive review. Journal of Cleaner Production 277:124109. doi:10.1016/j.jclepro.2020.124109.
   Web of Science ®Google Scholar
• Wang, X., S. Z. Luo, G. S. Liu, L. C. Zhang, and Y. Wang. 2014. Abrasion test of flexible protective materials on hydraulic structures. Water Science and Engineering 7 (1):106–16.
   Google Scholar
• Zhang, Z., C. Breidt, L. Chang, F. Haupert, and K. Friedrich. 2004. Enhancement of the wear resistance of epoxy: Short carbon fibre, graphite, PTFE and nano-TiO2. Composites Part A, Applied Science and Manufacturing 35 (12):1385–92. doi:10.1016/j.compositesa.2004.05.005.
   Web of Science ®Google Scholar
• Zhang, L., G. Zhang, L. Chang, B. Wetzel, B. Jim, and Q. Wang. 2016. Distinct tribological mechanisms of silica nanoparticles in epoxy composites reinforced with carbon nanotubes, carbon fibers and glass fibers. Tribology International 104:225–36. doi:10.1016/j.triboint.2016.09.001.
   Web of Science ®Google Scholar