Two-Zone Model Application to Breathing Zone and Area Welding Fume Concentration Data

REFERENCES

• U.S. Environmental Protection Agency (EPA) . 1994 . Development of Particulate and Hazardous Emission Factors for Electric Arc Welding 1 – 247 . (AP-42, Section 12.9). Revised Final Report by L. Henning and J. Kinsey (EPA Contract No. 68-D2-0159)Research Triangle Park, N.C.: USEPA, Office of Air Quality Planning and Standards Emission Inventory Branch
   Google Scholar
• Antonini , J. 2003 . Health effects of welding . Crit. Rev. Toxicol. , 33 ( 1 ) : 61 – 103 .
   PubMed Web of Science ®Google Scholar
• Moreton , J. and Sharples , R. V. 1986 . Fume problems during manual metal arc weld surfacing . Surfacing Journal International , 1 : 138 – 141 .
   Google Scholar
• Bureau of Mines . 1987 . Fumes from Shielded Metal Arc Welding Electrodes , Edited by: McIlwain , J.F. and Neumeier , L.A. 1 – 18 . U.S. Department of the Interior, Bureau of Mines . (Report of Investigations RI 9105)
   Google Scholar
• Heile , R. F. and Hill , D. C. 1975 . Particulate fume generation in arc welding processes . Welding Research Supplement , July : 201S – 210S .
   Google Scholar
• Franke , J. E. and Wadden , R. A. 1987 . Indoor contaminant emission rates characterized by source activity factors . Environ. Sci. Technol. , 21 : 45 – 51 .
   Web of Science ®Google Scholar
• Berman , L. 2005 . “ Welding Fume Exposure Assessment under Isolated Process Conditions ” . Amsterdam : Ph.D. dissertation, University of Illinois at Chicago, Health Sciences Center .
   Google Scholar
• National Institute for Occupational Safety Health (NIOSH) . 1994 . “ Particulates not Otherwise Regulated, Total 0500 ” . In NIOSH Manual of Analytical Methods (NMAM) , 4th , Cincinnati, Ohio : Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, NIOSH . Pub no. 94-113
   Google Scholar
• National Institute for Occupational Safety Health (NIOSH) . 2003 . “ Elements by ICP 7300 ” . In NIOSH Manual of Analytical Methods (NMAM) , 4th , Cincinnati, Ohio : Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, NIOSH . 3rd Suppl. (Pub no. 2003-154.)
   Google Scholar
• Wurzelbacher , S. J. , Hudlock , S. D. , Johnston , O. E. , Blade , L. M. and Shulman , S. A. 2002 . A pilot study on the effects of two ventilation methods on weld fume exposures in a shipyard confined space welding task . Appl. Occup. Environ. Hyg. , 17 : 735 – 740 .
   PubMedGoogle Scholar
• Vasconcelos , M.T.S.D. , Machado , A.A.S.C. and Silva , P.A.P Laquipai . 1996 . Metals and fluoride from electric arc welding fume in real tasks. Part I–Correlations between the levels of the different pollutants . Occup. Hyg. , 3 : 311 – 329 .
   Google Scholar
• Bureau of Mines Information . 1982 . Reduction of Airborne Contaminants from Welding Exhaust at Surface Edited by: Derby , G.K. 1 – 12 . (Circular 8868). U.S. Department of the Interior, Bureau of Mines
   Google Scholar
• American Society for Testing Materials (ASTM) . 2000 . Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution (E714-00) , West Conshohocken, Pa. : ASTM . Standard
   Google Scholar
• Nicas , M. 1996 . Estimating exposure intensity in an imperfectly mixed room . Am. Ind. Hyg. Assoc. J. , 57 : 542 – 550 .
   PubMed Web of Science ®Google Scholar
• Nicas , M. 2000 . “ Two-zone model ” . In Mathematical Models for Estimating Occupational Exposure to Chemicals , Edited by: Keil , C.B. 51 – 56 . Fairfax, Va. : AIHA Press .
   Google Scholar
• Nicas , M. and Jayjock , M. 2002 . Uncertainty in exposure estimates made by modeling versus monitoring . Am. Ind. Hyg. Assoc. J. , 63 : 275 – 283 .
   Google Scholar
• Cherrie , J. W. 1999 . The effect of room size and general ventilation on the relationship between near and far field concentrations . Appl. Occup. Environ. Hyg. , 14 : 539 – 546 .
   PubMedGoogle Scholar
• Wadden , R. A. and Scheff , P. A. 1983 . Indoor Air Pollution, Characterization, Prediction, and Control , Toronto, Ontario, Canada : John Wiley .
   Google Scholar
• Liu , D. , Wong , H. , Quinlan , P. and Blanc , P. D. 1995 . Welding helmet airborne fume concentrations compared to personal breathing zone sampling . Am. Ind. Hyg. Assoc. J. , 56 : 280 – 283 .
   PubMed Web of Science ®Google Scholar
• Harris , M. K. , Ewing , W. M. Longo , W. 2005 . Manganese exposures during shielded metal arc welding (SMAW) in an enclosed space . J. Occup. Environ. Hyg. , 2 : 375 – 382 .
   PubMed Web of Science ®Google Scholar
• Chung , K.Y. K. , Carter , G. J. and Stancliffe , J. D. 1999 . Laboratory evaluation of a protocol for personal sampling of airborne particles in welding and allied processes . Appl. Occup. Environ. Hyg. , 14 : 107 – 118 .
   PubMedGoogle Scholar
• Jenney , C. L. and O'Brien , A. , eds. 2001 . “ Welding Handbook Volume 1–Welding Science & Technology ” . 495 – 596 . Miami, Fla. : American Welding Society .
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH) . 1979 . Assessment of Selected Control Technology Techniques for Wwelding Fumes Edited by: Van Wagenen , H.D. NIOSH Pub. No. 79-125
   Google Scholar
• Wadden , R. A. , Hawkins , J. L. , Scheff , P. A. and Franke , J. E. 1991 . Characterization of emission factors related to source activity for trichloroethylene degreasing and chrome plating processes . Am. Ind. Hyg. Assoc. J. , 52 : 349 – 356 .
   PubMed Web of Science ®Google Scholar
• Bureau of Mines . 1983 . The Generation, Collection, and Analysis of Welding Fumes Edited by: McIlwain , J.F. and Neumeier , L.A. 1 – 14 . (Report of Investigations RI 8793). U.S. Department of the Interior, Bureau of Mines
   Google Scholar