REFERENCES
- Flanagan , M. E. , Seixas , N. , Becker , P. , Takacs , B. and Camp , J. 2006 . Silica exposure on construction sites: Results of an exposure monitoring data compilation project. . J. Occup. Environ. Hyg. , 3 : 144 – 152 .
- Linch , K. D. , Miller , W.E. , Althouse , R.B. , Groce , D.W. and Hale , J.M. 1998 . Surveillance of respirable crystalline silica dust using OSHA compliance data (1979–1995). . Am. J. Ind. Med. , 34 : 47 – 558 .
- “NIOSH Pocket Guide to Chemical Hazards. Silica, crystalline (as respirable dust)” . [Online] Available at http://www.cdc.gov/niosh/npg/npgd0553.html (Accessed November 6, 2008).
- National Institute for Occupational Safety and Health (NIOSH) . 2002 . Health Effects of Occupational Exposure to Respirable Crystalline Silica , Cincinnati , Ohio : NIOSH . DHHS (NIOSH) Pub. No. 2002-129.
- ACGIH . 2006 . 2006 TLVs and BEIs Based on the Documentation of the Threshold Limit Values for Chemical Substances and Physical Agents & Biological Exposure Indices , Cincinnati , Ohio : ACGIH .
- ACGIH . 2006 . Documentation of the TLVs—Silica, Crystalline: Alpha Quartz and Cristobalite , Cincinnati , Ohio : ACGIH Publications Office .
- Heitbrink , W. A. and Bennett , J. 2006 . A numerical and experimental investigation of crystalline silica exposure control during tuck pointing. . J. Occup. Environ. Hyg. , 3 : 366 – 378 .
- Collingwood , S. and Heitbrink , W.A. 2007 . Field evaluation of an engineering control for respirable crystalline silica exposures during mortar removal. . J. Occup. Environ. Health , 4 : 875 – 887 .
- ACGIH . 2006 . Industrial Ventilation—A Manual of Recommended Practice, , 26th ed. , Cincinnati , Ohio : ACGIH .
- Nij , E. T. , Hilhorst , S. Spee , T. 2003 . Dust control measures in the construction industry. . Ann. Occup. Hyg. , 47 : 211 – 218 .
- Soderberg , G. 1987 . Handbook for Planning and Dimensioning of Spot Extraction , Norsborg , , Sweden : Dustcontrol .
- Nevers , D.E. 1987 . Air Pollution Control Engineering , 232 New York : McGraw Hill .
- Hinds , W.C. 1999 . Aerosol Technology—Properties, Behavior, and Measurement of Airborne Particles , New York : John Wiley and Sons .
- Halmi , D. 1974 . Metering performance investigation and substantiation of the universal venturi tube. Part 1 hydraulic shape and discharge coefficient. . Trans. ASME J. Fluids Eng. , 96 ( 2 ) : 124 – 138 .
- International Standards Organization (ISO) . 2003 . ISO 5167-4 Measurement of Fluid Flow by Means of a Pressure Differential Device Inserted in the Circular Cross-Section Conduits Running Full—Part 4: Venturi Tubes , Geneva : ISO .
- Miller , R.W. 1988 . Flow Measurement Engineering Handbook, , 2nd ed. , 6 – 30 . New York : McGraw Hill .
- AIHA . 2005 . American National Standard for Occupational Safety and Health Management Systems , Fairfax , Va : AIHA . ANSI/AIHA Z-10.