Effectiveness of Dust Control Methods for Crystalline Silica and Respirable Suspended Particulate Matter Exposure During Manual Concrete Surface Grinding

REFERENCES

• “ Occupational Employment and Wages, May 2008, 47-2051 Cement Masons and Concrete Finishers ” . [Online] Available at http://www.bls.gov/oes/current/oes472051.htm#nat (Accessed June 3, 2010)
   Google Scholar
• Akbar-Khanzadeh , F. , Milz , S. A. Ames , A. 2007 . Crystalline silica dust and respirable particulate matter during indoor concrete grinding —Wet grinding and ventilated grinding compared with uncontrolled conventional grinding . J. Occup. Environ. Hyg. , 4 : 770 – 779 .
   PubMed Web of Science ®Google Scholar
• Flanagan , M. E. , Seixas , N. Becker , P. 2006 . Silica exposure on construction sites: Results of an exposure monitoring data compilation project . J. Occup. Environ. Hyg. , 3 : 144 – 152 .
   PubMed Web of Science ®Google Scholar
• Rappaport , S. M. , Goldberg , M. Susi , P. 2003 . Excessive exposure to silica in the U.S. construction industry . Ann. Occup. Hyg. , 47 : 111 – 122 .
   PubMed Web of Science ®Google Scholar
• Flanagan , M. E. , Seixas , N. Major , M. 2003 . Silica dust exposure during selected construction activities . Am. Ind. Hyg. Assoc. J. , 64 : 319 – 328 .
   Google Scholar
• Akbar-Khanzadeh , F. and Brillhart , R. L. 2002 . Respirable crystalline silica dust exposure during concrete finishing (grinding) using hand-held grinders in the construction industry . Ann. Occup. Hyg. , 46 : 341 – 346 .
   PubMed Web of Science ®Google Scholar
• Croteau , G. A. , Guffey , S. E. Flanagan , M. E. 2002 . The effects of local ventilation controls on dust exposure during concrete cutting and grinding activities . Am. Ind. Hyg. J. , 63 : 458 – 467 .
   Google Scholar
• Lumens , M. and Spee , T. 2001 . Determinants of exposure to respirable quartz dust in the construction industry . Ann. Occup. Hyg. , 45 : 585 – 595 .
   PubMed Web of Science ®Google Scholar
• Linch , K. , Miller , W. E. Althouse , R. B. 1998 . Surveillance of respirable crystalline silica dust using OSHA compliance data (1979–1995) . Am. J. Ind. Med. , 34 : 547 – 558 .
   PubMed Web of Science ®Google Scholar
• Yassin , A. , Yebesi , F. and Tingle , R. 2005 . Occupational exposure to crystalline silica dust in the United States, 1988–2003 . Environ. Health Perspect. , 113 : 255 – 260 .
   PubMed Web of Science ®Google Scholar
• Prevention (CDC). Centers for Disease Control . 2005 . Silicosis mortality, prevention, and control —United States, 1968–2002 . Morbidity and Mortality Weekly Report , 54 : 401 – 405 .
   PubMedGoogle Scholar
• Steenland , K. 2005 . One agent, many diseases: Exposure-response data and comparative risks of different outcomes following silica exposure . Am. J. Ind. Med. , 48 : 16 – 23 .
   PubMed Web of Science ®Google Scholar
• Linch , K. 2002 . Respirable concrete dust—Silicosis hazard in the construction industry . Appl. Occup. Environ. Hyg. , 17 : 209 – 211 .
   PubMedGoogle Scholar
• National Institute for Occupational Safety and Health (NIOSH) . 1996 . Request for Assistance in Preventing Silicosis and Deaths in Construction Workers , 2 – 3 . Washington, D.C. : NIOSH . Pub. No. 96-112
   Google Scholar
• Freeman , C. S. and Grossman , E. A. 1995 . Silica exposures in workplace in the United States between 1980 and 1992 . Scand. J. Work, Environ. Health , 2 ( Suppl. 2 ) : 47 – 49 .
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH) . 2002 . Hazard Review: Health Effects of Occupational Exposure to Respirable Crystalline Silica , 67 – 79 . Washington, D.C. : NIOSH . DHHS (NIOSH) Pub. No. 2002-129
   Google Scholar
• ACGIH . 2004 . Industrial Ventilation, A Manual of Recommended Practice , 25th ed , 9 – 9 . Cincinnati, Ohio : ACGIH .
   Google Scholar
• Eller , P. M. and Cassinelli , M. E. 1998 . NIOSH Manual of Analytical Methods , 4th ed. , Washington, D.C. : NIOSH . (Methods 0600 and 7500, DHHS (NIOSH) Pub. No. 94–113)
   Google Scholar
• Hornung , R. W. and Reed , L. D. 1990 . Estimations of average concentration in the presence of non-detectable values . Appl. Occup. Environ. Hyg. , 5 : 46 – 51 .
   Google Scholar
• Helsel , D. 2010 . Much ado about next to nothing: Incorporating nondetects in science . Ann. Occup. Hyg. , 54 : 257 – 262 .
   PubMed Web of Science ®Google Scholar
• Flynn , M. R. 2010 . Analysis of censored exposure data by constrained maximization of the Shapiro-Wilk W statistic . Ann. Occup. Hyg. , 54 : 263 – 271 .
   PubMedGoogle Scholar
• ACGIH . 2009 . Threshold Limit Values and Biological Exposure Indices , 51 Cincinnati, Ohio : ACGIH .
   Google Scholar
• Nij , E. , Hilhorst , S. Spee , T. 2003 . Dust control measures in the construction industry . Ann. Occup. Hyg. , 47 : 211 – 218 .
   PubMed Web of Science ®Google Scholar
• Echt , A. and Sieber , W. K. 2002 . Control of silica exposure from hand tools in construction: Grinding concrete . Appl. Occup. Environ. Hyg. , 17 : 457 – 461 .
   PubMedGoogle Scholar
• Croteau , G. , Flanagan , M. Camp , J. 2004 . The efficacy of local exhaust ventilation for controlling dust exposures during concrete surface grinding . Ann. Occup. Hyg. , 38 : 509 – 518 .
   Web of Science ®Google Scholar
• Thorpe , A. , Ritchie , A. S. Gibson , M. J. 1999 . Measurements of the effectiveness of dust control on cut-off saws used in the construction industry . Ann. Occup. Hyg. , 43 : 443 – 456 .
   PubMed Web of Science ®Google Scholar
• Meeker , J. D. , Cooper , M. R. Lefkowitz , D. 2009 . Engineering control technologies to reduce occupational silica exposures in masonry cutting and tuckpointing . Pub. Health Rep. , 124 ( Suppl. 1 ) : 101 – 111 .
   PubMedGoogle Scholar
• Lahiri , S. , Levenstein , C. Nelson , D. I. 2005 . The cost effectiveness of occupational health interventions: prevention of silicosis . Am. J Ind. Med. , 48 : 503 – 514 .
   PubMed Web of Science ®Google Scholar