Case Study

REFERENCES

• National Institute for Occupational Safety and Health (NIOSH) . 1987 . Guide to Industrial Respiratory Protection (DHHS NIOSH Pub. No. 87-116). Cincinnati, Ohio: U.S. Department of Health and Human Services, Centers for Disease Control, NIOSH
   Google Scholar
• Occupational Safety and Health Administration (OSHA) . Abrasive Blasting Hazards in Shipyard Employment, An OSHA Guidance Document . Available at http://www.osha.gov/dts/maritime/standards/guidance/shipyard_guidance.html. (accessed November 2012)
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH) . 1994 . Health Hazard Evaluation and Technical Assistance Report: Bath Iron Works Corporation, by D. Sylvain. NIOSH HETA Report No. 94-0122-2578. Cincinnati, Ohio: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, NIOSH
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH) . 1998 . Health Hazard Evaluation and Technical Assistance Report: Avondale Shipyards, by M. Kiefer, D. Trout, and M.E. Wallace. NIOSH HETA Report No. 97-0260-2716. Cincinnati, Ohio: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, NIOSH
   Google Scholar
• Occupational Safety and Health Administration (OSHA) . Abrasive Blasting Monitoring Requirements and Sampling Procedures . Standard interpretation of August 13, 1999, from Richard E. Fairfax, Director, Directorate of Compliance Programs - OSHA, to Irene S. Fanelli, Environmental Health Consultants. Available at http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=INTERPRETATIONS&p_id=22777 (accessed November 2012)
   Google Scholar
• Aizenberg , B. , England , A. and Grinshpun , S. 2000 . Metal exposures among abrasive blasting workers at four U.S. Air Force facilities . Appl. Occup. Environ. Hyg , 15 : 766 – 772 .
   PubMedGoogle Scholar
• National Institute for Occupational Safety and Health (NIOSH) . 2012 . Health Hazard Evaluation Report: Evaluation of Air Sampling Methods for Abrasive Blasting – Louisiana, by D. Sylvain, D. Ceballos, and M. Kiefer. HETA No. 2001-0279-3163. Cincinnati, Ohio: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, NIOSH
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH) . “NIOSH Manual of Analytical Methods (NMAM).” Method 0500 . Available at http://www.cdc.gov/niosh/nmam/ (accessed November 2012)
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH) . 2007 . Applied Research and Technology Report: Control Technology and Exposure Assessment for Occupational Exposure to Beryllium: Abrasive Blasting with Coal-Slag . By K. G. Crouch, A. S. Echt, R. Kurimo, Y. T. Gagnon. Report No. EPHB 263-13a. Cincinnati, Ohio: U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, NIOSH
   Google Scholar
• SKC . Abrasive Blasting Sampler for Heavy Metals . Available at http://www.skcinc.com/instructions/1602.pdf (accessed September 2012)
   Google Scholar
• Stephenson , D. , Spear , T. , Seymour , M. and Cashell , L. 2002 . Airborne exposure to heavy metals and total particulate during abrasive blasting using copper slag abrasive . Appl. Occup. Environ. Hyg , 17 : 437 – 443 .
   PubMedGoogle Scholar