475
Views
3
CrossRef citations to date
0
Altmetric
Original Articles

Task-Specific Noise Exposure During Manual Concrete Surface Grinding in Enclosed Areas—Influence of Operation Variables and Dust Control Methods

, , &
Pages 478-486 | Published online: 08 Aug 2013

REFERENCES

  • Occupational Safety and Health Administration (OSHA): . Occupational Noise Exposure , 29 CFR 1910.95. U.S. Department of Labor . Available at http://www.osha.gov/pls/oshaweb/owadisp.show_document?p_table=standards&p_id=9735 (accessed Jan. 26, 2013)
  • National Institute for Occupational Safety and Health (NIOSH): . 1998 . Criteria for a Recommended Standard—Occupational Noise Exposure (Revised Criteria) Cincinnati , Ohio
  • U. S. Department of Labor: . 2011 . Occupational Outlook Handbook, , 2010–11 Edition Available at http://www.bls.gov/oco/oco20016.htm (accessed Jan. 26, 2013)
  • Concha-Barrientos , M. , Campbell-Lendrum , D. and Steenland , K. 2004 . Occupational Noise: Assessing the Burden of Disease from Work-Related Hearing Impairment at National and Local Levels , Geneva : World Health Organization (WHO) Environmental Burden of Disease Series . No. 9
  • Eaton , S. Construction Noise Workers’ Compensation Board of British Columbia Engineering Section Report ARCS Reference No: 0135-20, Project Number: 7.11-99284, February 2000. Available at http://www.nonoise.org/resource/construc/bc.htm (accessed Jan. 26, 2013)
  • Neitzel , R. , Seixas , N. S. , Camp , J. and Yost , M. 1999 . An assessment of occupational noise exposures in four construction trades . Am. Ind. Hyg. Assoc. J. , 60 : 807 – 817 .
  • Elstad , T. , Cahill , R. , Shaw , C. and Duble , A. 2000 Final Report: Worksite Redesign Project Agreement Contract # 97/99-7. Available at http://www.orosha.org/pdf/roadmasterfinal.pdf (accessed Jan. 26, 2013)
  • Government of Western Australia (GWA): . 2008 Noise Management Data Sheets: Angle Grinder , Department of Commerce, Government of Western Australia . Available at http://www.commerce.wa.gov.au/WorkSafe/Content/Safety_Topics/Noise/Further_information/Angle_grinders.html#1 (accessed Jan. 26, 2013)
  • Akbar-Khanzadeh , F. , Milz , S. Ames , A. 2007 . Crystalline silica dust and respirable particulate matter during indoor concrete grinding—Wet-grinding and ventilated-grinding compared with uncontrolled conventional-grinding . JOEH , 4 : 770 – 779 .
  • Akbar-Khanzadeh , F. , Milz , S. Wagner , C. 2010 . Effectiveness of dust control methods for crystalline silica and respirable suspended particulate matter exposure during manual concrete surface grinding . JOEH , 7 : 700 – 711 .
  • Occupational Safety and Health Administration (OSHA): . Noise and Hearing Conservation - Appendix IV:C. Methods for Estimating HPD Attenuation Available at http://www.osha.gov/dts/osta/otm/noise/hcp/attenuation_estimation.html (accessed Jan. 29, 2013)
  • Suggs , C. W. “ Noise Problems of Hand and Power Tools ” . In Proceedings of Noise-Con 81, National Conference on Noise Control Engineering, Applied Noise Control Technology , Edited by: Royster , H. , Hart , D. and Stewart , N. D. North Carolina State University . Raleigh, June 8–10, 1981. Pp. 339–342. Available at http://dx.doi.org/10.1016/0003-6870(84)90322-3 (accessed Jan. 26, 2013)
  • Heisel , U. and Gärtner , H. 1999 . Noise Reduction by Rough-Working with Handheld Machine Tools , Bremerhaven , , Germany : Wirtschaftsverlag NW Verlag für neue Wissenschaft GmbH . (Schriftenreihe der Bundesanstalt für Arbeitsschutz und rbeitsmedizin: Forschungsbericht, Fb 847). Available at http://www.baua.de/en/Publications/Research-reports/1999/Fb847.html?nn=717392 (accessed Jan. 26, 2013)
  • Greenslade , E. and Larsson , T. J. 1997 . Reducing vibration exposure from hand-held grinding, sanding and polishing power tools by improvement in equipment and industrial processes . Safety Science , 25 : 143 – 152 . Available at http://dx.doi.org/10.1016/S0925-7535(97)00040-4 (accessed Jan. 26, 2013)
  • Biery , M. , Terwillger , F. , Robinson , R. , Adkison , D. and Gonsowski , M. 2005 A Case Study of the Sound Generated by a Handheld Angle Grinder , Michigan Technological University, Department Mechanical Engineering (MTU-DME) . Available at http://www.me.mtu.edu/courses/meem4704/project/spring05/grinder_report.pdf (accessed January 26, 2013
  • Gorai , A. K. , Mukhopadhyay , A. K. , Pal , A. K. and Dey , U. K. 2008 . Design of enclosure of a grinding machine for the noise attenuation . J. Environ. Sci. Eng. , 50 : 141 – 146 .
  • Hansen , C. H. and Goelzer , B. I.F. 2013 . “ Engineering Noise Control ” . In Occupational exposure to noise: Evaluation, prevention and control , Edited by: Goelzer , B.I.F. and Sehrndt , G. A. 245 – 296 . Geneva : World Health Organization .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.