760
Views
17
CrossRef citations to date
0
Altmetric
Departments

Case Study

Ultrafine Particles Exposure in Apprentice Welders

, &

REFERENCES

  • Cunningham , E. , Jablonski , W. and Todd , J. 1996 . Electron microscopy studies of silica fume emissions from a silicon smelter in southern Tasmania, Australia . Am. Ind. Hyg. Assoc. J. , 57 : 1024 – 1034 .
  • Debia , M. , Weichenthal , S. , Tardif , R. and Dufresne , A. 2012 . Ultrafine particle (UFP) exposures in an aluminium smelter: Soderberg vs. prebake potrooms . Environ. Poll. , 1 ( 1 ) : 2 – 12 .
  • Thomassen , Y. , Koch , W. Dunkhorst , W. 2006 . Ultrafine particles at workplaces of a primary aluminium smelter . J. Environ. Mon. , 8 ( 1 ) : 127 – 133 .
  • Rendall , R. , Phillips , J. and Renton , K. 1994 . Death following exposure to fine particulate nickel from a metal arc process . Ann. Occup. Hyg. , 38 : 921 – 930 .
  • Zimmer , A. T. and Maynard , A. D. 2002 . Investigation of the aerosols produced by a high-speed, hand-held grinder using various substrates . Ann. Occup. Hyg. , 46 ( 8 ) : 663 – 672 .
  • Evans , D. E. , Heitbrink , W. A. , Slavin , T. J. and Peters , T. M. 2008 . Ultrafine and respirable particles in an automotive grey iron foundry . Ann. Occup. Hyg. , 52 ( 1 ) : 9 – 21 .
  • Handy , R. G. , Jackson , M. J. , Robinson , G. M. and Lafreniere , M. D. 2006 . The measurement of ultrafine particles: A pilot study using a portable particle counting technique to measure generated particles during a micromachining process . J. Mater. Eng. Perf. , 15 ( 2 ) : 172 – 177 .
  • Elihn , K. and Berg , P. 2009 . Ultrafine particle characteristics in seven industrial plants . Ann. Occup. Hyg. , 53 ( 5 ) : 475 – 484 .
  • Brouwer , D. H. , Gijsbers , J. H.J. and Lurvink , M. W.M. 2004 . Personal exposure to ultrafine particles in the workplace: Exploring sampling techniques and strategies . Ann. Occup. Hyg. , 48 ( 5 ) : 439 – 453 .
  • Hewett , P. 1995 . Estimation of regional pulmonary deposition and exposure for fumes from SMAW and GMAW mild and stainless steel consumables . Am. Ind. Hyg. Assoc. J. , 56 ( 2 ) : 136 – 142 .
  • Hovde , C. A. and Raynor , P. C. 2007 . Effects of voltage and wire feed speed on weld fume characteristics . J. Occup. Environ. Hyg. , 4 ( 12 ) : 903 – 912 .
  • Zimmer , A. T. , Baron , P. A. and Biswas , P. 2002 . The influence of operating parameters on number-weighted aerosol size distribution generated from a gas metal arc welding process . J. Aerosol Sci. , 33 ( 3 ) : 519 – 531 .
  • Pfefferkorn , F. E. , Bello , D. Haddad , G. 2010 . Characterization of exposures to airborne nanoscale particles during friction stir welding of aluminum . Ann. Occup. Hyg. , 54 ( 5 ) : 486 – 503 .
  • Hewett , P. 1995 . The particle size distribution, density, and specific surface area of welding fumes from SMAW and GMAW mild and stainless steel consumables . Am. Ind. Hyg. Assoc. J. , 56 ( 2 ) : 128 – 135 .
  • Isaxon , C. , Pagels , J. Gudmundsson , A. 2009 . Characteristics of welding fume aerosol investigated in three Swedish workshops . J. Physics: Conf. Ser. , 151 : 1 – 5 .
  • Stephenson , D. , Seshadri , G. and Veranth , J. M. 2003 . Workplace exposure to submicron particle mass and number concentrations from manual arc welding of carbon steel . Am. Ind. Hyg. Assoc. J. , 64 ( 4 ) : 516 – 521 .
  • Brand , P. , Lenz , K. , Reisgen , U. and Kraus , T. 2013 . Number size distribution of fine and ultrafine fume particles from various welding processes . Ann. Occup. Hyg. , 57 ( 3 ) : 305 – 313 .
  • Donaldson , K. , Stone , V. , Gilmour , P. , Brown , D. and MacNee , W. 2000 . Ultrafine particles: Mechanism of lung injury . Phil. Trans. R. Soc. Lond. A. , 358 : 2741 – 2749 .
  • Oberdorster , G. , Oberdorster , E. and Oberdorster , J. 2005 . Nanotoxicology: An emerging discipline evolving from studies of ultrafine particles . Environ. Health Perspect. , 113 ( 7 ) : 823 – 839 .
  • Oesterling , E. , Chopra , N. Gavalas , V. 2008 . Alumina nanoparticles induce expression of endothelial cell adhesion molecules . Toxicol. Lett. , 178 ( 3 ) : 160 – 166 .
  • Sioutas , C. , Delfino , R. and Singh , M. 2005 . Potential role of ultrafine particles in associations between airborne particle mass and cardiovascular health . Environ. Health Perspect. , 113 : 934 – 946 .
  • Warheit , D. B. , Sayes , C. M. , Reed , K. L. and Swain , K. A. 2008 . Health effects related to nanoparticle exposures: Environmental, health and safety considerations for assessing hazards and risks . Pharmacol. Ther. , 120 ( 1 ) : 35 – 42 .
  • Wittmaack , K. 2007 . In search of the most relevant parameters for quantifying lung inflammatory response to nanoparticle exposure: Particle number, surface area or what? . Environ. Health Perspect. , 114 : 187 – 194 .
  • Baxter , C. S. , Ross , C. S. Fabian , T. 2010 . Ultrafine particle exposure during fire suppression—Is it an important contributory factor for coronary heart disease in firefighters? . J. Occup. Environ. Med. , 52 ( 8 ) : 791 – 796 .
  • Antonini , J. , Keane , M. Chen , B. 2011 . Alterations in welding process voltage affect the generation of ultrafine particles, fume composition, and pulmonary toxicity . Nanotoxicol , 5 ( 4 ) : 700 – 710 .
  • International Agency for Research on Cancer . 1990 . Chromium, Nickel and Welding. IARC Monographs on the Evaluation of Carcinogenic Risks to Humans , Vol. 49 , Lyon , , France : International Agency for Research on Cancer (IARC) .
  • El-zein , M. , Malo , J. L. , Infante-Rivard , C. and Gautrin , D. 2003 . Incidence of probable occupational asthma and changes in airway calibre and responsiveness in apprentice welders . Eur. Respir. J. , 22 : 513 – 518 .
  • Burgess , W. A. 1995 . Recognition of Health Hazards in Industry: A Review of Materials Processes (2nd edition) , New York: John Wiley & Sons .
  • Berlinger , B. , Benker , N. Weinbruch , S. 2010 . Physicochemical characterisation of different welding aerosols . Anal. Bioanal. Chem. , 399 ( 5 ) : 1773 – 1780 .
  • Soward , J. W. , Lippold , J. C. , Dickinson , D. W. and Ramirez , A. J. 2008 . Characterization of welding fume from SMAW electrodes—Part I. Size and mass distributions, fume generation rates, and chemistry are compared for three SMAW electrodes . Welding Res , 87 : 106 – 112 .
  • American Conference of Gouvernmental Industrial Hygienists . 2007 . Industrial Ventilation. A Manual of Recommended Practice for Design, 26th Edition , Cincinnati , Ohio : American Conference of Governmental and Industrial Hygienists .
  • Schoonover , T. , Conroy , L. , Lacey , S. and Plavka , J. 2011 . Personal exposure to metal fume, NO2, and O3 among production welders and non-welders . Ind. Health , 49 : 63 – 72 .
  • Lehnert , M. , Pesch , B. Lotz , A. 2012 . Exposure to inhalable, respirable, and ultrafine particles in welding fume . Ann. Occup. Hyg. , 56 ( 5 ) : 557 – 567 .
  • Zhu , Y. , Yu , Y. , Kuhn , T. and Hinds , W. C. 2006 . Field comparison of P-Trak and condensation particle counters . Aerosol Sci. Tech. , 40 ( 6 ) : 422 – 430 .
  • Park , J. Y. , Ramachandran , G. , Raynor , P. C. , Eberly , L. E. and Olson , G. Jr . 2010 . Comparing exposure zones by different exposure metrics using statistical parameters: Contrast and precision . Ann. Occup. Hyg. , 54 ( 7 ) : 799 – 812 .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.