REFERENCES
- International Agency for Research on Cancer (IARC): Polynuclear Aromatic Hydrocarbons, Part 2, Carbon Blacks, Mineral Oils and Some Nitroarenes. IARC Monograph on the Evaluation of Carcinogenic Risks to Humans. Lyon, France: IARC, 1984 . pp. 33:87–168 .
- National Institute for Occupational Safety and Health (NIOSH): Criteria for a Recommended Standard Occupational Exposure to Metalworking Fluids. DHHS Publication 98-1002. Cincinnati, Ohio: NIOSH, 1998.
- Woskie, S.R., M.A. Virji, M. Hallock, T.J. Smith, and K. Hammond: Summary of the findings from the exposure assessments for metalworking fluid mortality and morbidity studies. Appl. Occup. Environ. Hyg. 11:855–864 (2003).
- Friesen, M.C., S. Costello, S.W. Thurston, and E.A. Eisen: Distinguishing the common components of oil- and water-based metalworking fluids for assessment of cancer incidence risk in autoworkers. Am. J. Ind. Med. 54:450–460 (2011).
- American Society of Tool and Manufacturing Engineers (ASTME): Cutting and Grinding Fluids, Selection and Application, R.K. Springborn (ed). Dearborn, Mich.: ASTME, 1967. pp. 63–75.
- Friesen, M.C., D.-U. Park, and J.S. Colt, et al.: Developing estimates of frequency and intensity of exposure to three types of metalworking fluids in a population-based case-control study of bladder cancer. Am. J. Ind. Med. 57:915–927 (2014).
- Colt, J.S., M.R. Karagas, and M. Schwenn, et al.: Occupation and bladder cancer in a population-based case-control study in northern New England. Occup. Environ. Med. 68:239–249 (2010).
- Park, D., P.A. Stewart, and J.B. Coble: A comprehensive review of the literature on exposure to metalworking fluids. J. Occup. Environ. Hyg. 6:530–541 (2009).
- Park, D., P.A. Stewart, and J.B. Coble: Determinants of exposure to metalworking fluid aerosols: A literature review and analysis of reported measurements. Ann. Occup. Hyg. 53:271–288 (2009).
- Childers, J.C.: The Chemistry of Metalworking Fluids. In Metalworking Fluids, J.P. Byers (ed.). Boca Raton, Fla.: CRC Press, Taylor & Francis, 2006. p. 128.
- Colt, J.S., M.C. Friesen, and P.A. Stewart, et al.: A case-control study of occupational exposure to metalworking fluids and bladder cancer risk among men. Occup. Environ. Med. June 20, 2014. [Epub ahead of print].
- Blenkowski, K.: Coolants and lubricants. The truth. Manuf. Eng. March:90–96 (1993).
- Salmon, S.C.: Metal Cutting Processes. In: Metalworking Fluids, J.P. Byers (ed.), 2nd ed. Boca Raton, Fla.: CRC Press, Taylor & Francis, 2006. pp. 47–72.
- University of Northern Iowa: Cutting Fluid Management. Small Machining Operations, 3rd ed. Cedar Falls, Iowa: Waste Reduction Center, 2003. pp. 5–14.
- University of Northern Iowa: Cutting Fluid Management in Small Machine Shop Operations. Cedar Falls, Iowa: Waste Reduction Center, 1990. p. 7
- Sluhan, C.A.: Selecting the right cutting and grinding fluids. Tool. Prod. May:40–50 (1994).
- Aronson, R.B.: “Fluid Management Basics.” Mfg. Eng. 126(6):1–5 (2001). Available at http://www.sme.org/cgi-bin/find-articles.pl?&01ju0090&ME&20010601&&SME& (accessed Oct. 26, 2007).
- Kuchler, C.: Are you using the right cutting fluid? CNC Machining Winter:16–19 (2002).
- Chambers R.J.: “How to Select a Cutting Fluid.” CNC Machining Spring: 15–16. Available at http://www.atyourservice.haascnc.com/pdf/v2i05.pdf (accessed Oct. 28, 2007).
- Holmes, P.M.: Factors affecting the selection of cutting fluids. Ind. Lubr. Tribiol. Feb:47–55 (1971).
- Department of Ecology, Hazardous Waste and Toxics Reduction Program, State of Washington: Metal Machining Sector: A Pollution Prevention Assessment and Guidance. Pub#99-412. Olympia, Wash.: Department of Ecology, 1999. p. 9.
- Stewart, P.A., and W.F. Stewart: Occupational case-control studies: II. Recommendations for exposure assessment. Am. J. Ind. Med. 26:313–26 (1994).
- Koelsch, J.R.: “Pick the Right Fluids.” Available at http://www.sme.org/cgi-bin/find-articles.pl?&00ocff32&FF&20001014&&SME& (accessed Oct. 29, 2007).
- Lukas, J.: Auto industry seeks universal fluids. Lubricants World May:30 (1994).
- Teschke, K., A.F. Olshan, J.L. Daniels, et al.: Occupational exposure assessment in case–control studies: Opportunities for improvement. Occup. Environ. Med. 59:575–594 (2002).
- Lavoue, J. Pintos, M.Van Tongeren et al.: Comparison of exposure estimates in the Finnish job-exposure matrix FINJEM with a JEM derived from expert assessments performed in Montreal. Occup. Environ. Med. 69:465–471 (2012).