References
- Harper, M., and M. Demange: Concerning sampler wall deposits in the chemical analysis of airborne metals. J. Occup. Environ. Hyg. 4:D81–D86 (2007).
- Ashley, K., and M. Harper: Closed-face filter cassette (CFC) sampling—Guidance on procedures for inclusion of material adhering to internal sampler surfaces. J. Occup. Environ. Hyg. 10: D29–D33 (2013).
- Harper, M., and K. Ashley: Acid-soluble internal capsules for closed-face cassette elemental sampling and analysis of workplace air. J. Occup. Environ. Hyg. 10:297–306 (2013).
- National Institute for Occupational Safety and Health (NIOSH): “Elements by ICP (Hot Block/HCl/HNO3 Digestion), Method 7303.” In NIOSH Manual of Analytical Methods, 4th ed., P.C. Schlecht and P.F. O'Connor (eds.). Cincinnati, OH: NIOSH, 2003. Available at www.cdc.gov/niosh/nmam.
- NIOSH: “Elements by ICP (Nitric/Perchloric Acid Ashing), Method 7300.” In NIOSH Manual of Analytical Methods, 4th ed. P.C. Schlecht and P.F. O'Connor (eds.). Cincinnati, OH: NIOSH, (2003).
- NIOSH: “Elements by ICP (Aqua Regia Ashing), Method 7301.” In NIOSH Manual of Analytical Methods, 4th ed. P.C. Schlecht and P.F. O'Connor (eds.). Cincinnati, OH: NIOSH, 2003.
- NIOSH: “Elements by ICP (Microwave Digestion), Method 7302.” In NIOSH Manual of Analytical Methods, 5th ed. K. Ashley and P.F. O'Connor (eds.). Cincinnati, OH: NIOSH, 2014.
- ASTM International: Standard Guide for Sampling Chain of Custody Procedures, ASTM D4840 [Standard]. West Conshohocken, PA: ASTM International, 2010. Available at www.astm.org.
- Kennedy, E.R., T.J. Fischbach, R. Song, P.M. Eller, and S.A. Shulman: Guidelines for Air Sampling and Analytical Method Development and Evaluation; DHHS (NIOSH) Publ. No. 95-117. Cincinnati, OH: NIOSH, 1995.
- Bartley, D.L., S.A. Shulman, and P.C. Schlecht: “Measurement uncertainty and NIOSH method accuracy (Chap. P.).” In NIOSH Manual of Analytical Methods, 4th ed. P.C. Schlecht and P.F. O'Connor (eds.). Cincinnati, OH: NIOSH, 2003.
- Lee, E.G., W.P. Chisholm, D.A. Burns, J.H. Nelson, M.L. Kashon, and M. Harper: Comparison of lead and tin concentrations in air at a solder manufacturer from the closed-face 37-mm cassette with and without a custom cellulose-acetate cassette insert. J. Occup. Environ. Hyg. 11: 819–825 (2014).
- Ashley, K., S.A. Shulman, M.J. Brisson, and A.M. Howe: Interlaboratory evaluation of trace element determination in workplace air samples by inductively coupled plasma mass spectrometry. J. Environ. Monit. 14: 360–367 (2012).
- Drake, P.L., A.D. Marcy, and K. Ashley: Evaluation of a standardized method for determining soluble silver in workplace air samples. J. Environ. Monit. 8: 134–139 (2006).
- Hund, E., D.L. Massart, and J. Smeyers-Verbecke: Inter-laboratory studies in analytical chemistry. Anal. Chim. Acta 423: 145–165 (2000).