References
- Fastermann, P.: 3D-Druck/Rapid Prototyping. Eine Zukunftstechnologie – kompakt erklärt. [3D Printing/Rapid Prototyping: Brief Explanation of a Technology of the Future]. Heidelberg: Springer-Verlag, 2012. [German]
- Safe Work Australia: Brief Review on Health Effects of Laser Printer Emissions Measured as Particles. Canberra, Australia: Safe Work Australia, 2011.
- Stephens, B., P. Azimi, Z. El Orch, and T. Ramos: Ultrafine particle emissions from desktop 3D printers. Atmos. Environ. 79:334–339 (2013).
- Willoughby, B.G.: Air Monitoring in the Rubber and Plastics Industries. Shawbury, UK: Rapra Technology Ltd., 2003.
- Forrest, M.J, A.M. Jolly, S.R. Holding, and S.J. Richards: Emissions from processing thermoplastics. Ann. Occup. Hyg. 39:35–53 (1995).
- Griffey, J.: 3-D printers for libraries. Library Technol. Rep. 50:5 (2014).
- Rutkowski, J.V., and B.C. Levin: Acrylonitrile-Butadiene-Styrene copolymers (ABS): Pyrolysis and combustion products and their toxicity-A review of the literature. Fire Mater. 10:93–105 (1986).
- Cheng, S.-F., M.-L. Chen, P.-C. Hung, C.J. Chen, and I.F. Mao: Olfactory loss in poly (acrylonitrile-butadiene-styrene) plastic injection-moulding workers. Occup. Med. 54:469–474 (2004).
- National Institute of Occupational Safety and Health (NIOSH): “Elements by ICP: METHOD 7300,” Issue 3. NIOSH Manual of Analytical Methods (NMAM), 4th ed. [Standard]. Atlanta, GA: NIOSH/Centers for Disease Control and Prevention, 2003.
- Fierz, M., S. Weimer, and H. Burtscher: Design and performance of an optimized electrical diffusion battery. Aersol. Sci. 40:152–163 (2009).
- Fierz, M., P. Steigmeier, C. Houle, and H. Burtscher: Design, calibration and field performance of a miniature diffusion size classifier. Aerosol Sci. Technol. 45:1–10 (2011).
- Fierz, M., M.G.C. Vernooij, and H. Burtscher: An improved low-flow thermodenuder. J. Aerosol. Sci. 38:1163–1168 (2007).
- International Organization for Standardization (ISO): “Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID.” (ISO 16000-6) [Standard] Geneva, Switzerland: ISO 2011.
- Debia, M., C. Beaudry, S. Weichenthal, R. Tardif, and A. Dufresne: “Characterization and control of occupational exposure to nanoparticles and ultrafine particles,” Report R-777, Institut de Recherche Robert-Sauvé, Montréal, Canada. IRSST, 2013.
- Morawska, L., C. He, G. Johnson, et al.: An investigation into the characteristics and formation mechanisms of particles originating from the operation of laser printers. Environ. Sci. Technol. 43:1015–1022 (2009).
- Oglesby, L., N. Künzli, M. Röösli, et al.: Validity of ambient levels of fine particles as surrogate for personal exposure to outdoor air pollution — Results of the European EXPOLIS-EAS study. J. Air Waste Manag. Assoc. 50:1251–1261 (2000).
- Von Hahn, N., R. Van Gelder, D. Breuer, J.-U. Hahn, S. Gabriel, and H. Kleine: Ableitung von Innenraumarbeitsplatz-Referenzwerten [Deduction of reference values for indoor workplaces]. Gefahrstoffe - Reinhaltung der Luft 71:314–322 (2011). [in German]
- Afshari , A., U. Matson, and L.E. Ekberg. Characterization of indoor sources of fine and ultrafine particles: a study conducted in a full-scale chamber. Indoor Air 15:141–150 (2005).
- Hänninen, O., I. Brüske, M. Loh, et al.: Occupational and consumer risk estimates for nanoparticles emitted by laser printers. J. Nanopart. Res. 12:91–99 (2010).
![Supercharge Your Next Research Paper: Research and write your next paper with Jenni AI.]({"type":"image" , "src" : "/sda/112445/Skyscraper-econ.png"})