References
- IARC Working Group on the Evaluation of Carcinogenic Risks to Humans: Inorganic and Organic Lead Compounds, International Agency for Research on Cancer, 2006.
- “Council Directive 98/24/EC of 7 April 1998 on the protection of the health and safety of workers from the risks related to chemical agents at work.” Official Journal of the European Communities, 1998.
- Morton, J., R. Cotton, J. Cocker, and N.D. Warren: Trends in blood lead levels in UK workers, 1995-2007. Occup. Environ. Med. 67(9):590–595 (2010).
- Lawryk, N.J., H.A. Feng, and B.T. Chen: Laboratory evaluation of a field-portable sealed source x-ray fluorescence spectrometer for determination of metals in air filter samples. J. Occup. Environ. Hyg. 6(7):433–445 (2009).
- Bernick, M.B., and P.R. Campagna: Application of field-portable x-ray-fluorescence spectrometers for field-screening air monitoring filters for metals. J. Hazard. Mater. 43(1–2):91–99 (1995).
- Kim, N.S., J.H. Kim, K.D. Ahn, and B.K. Lee: Use of field-portable x-ray fluorescence (FPXRF) Analyzer to measure airborne lead levels in Korean workplaces. J. Occup. Health 49(6):493–498 (2007).
- Dost, A.A.: Monitoring surface and airborne inorganic contamination in the workplace by a field portable X-ray fluorescence spectrometer. Ann. Occup. Hyg. 40(5):589–610 (1996).
- Nygren, O.: New approaches for assessment of occupational exposure to metals using on-site measurements. J. Environ. Monitor. 4(5):623–627 (2002).
- Laohaudomchok, W., J.M. Cavallari, S.C. Fang, et al.: Assessment of occupational exposure to manganese and other metals in welding fumes by portable x-ray fluorescence spectrometer. J. Occup. Environ. Hyg. 7(8):456–465 (2010).
- Harper, M., B. Pacolay, P. Hintz, D.L. Bartly, J.E. Slaven, and M.E. Andrew: Portable XRF analysis of occupational air filter samples from different workplaces using different sampler: final results, summary and conclusion. J. Environ. Monitor. 9:1263–1270 (2007).
- National Institute of Occupational Safety and Health (NIOSH): “Lead by field portable XRF.” In Method 7702. Cincinnati, OH: National Institute for Occupational Safety and Health, 1998.
- Menrath, W., Y. Zakaria, A. El-Safty, et al.: Use of a field portable x-ray fluorescence analyzer for environmental exposure assessment of a neighborhood in Cairo, Egypt adjacent to the site of a former secondary lead smelter. J. Occup. Environ. Hyg. 12(8):555–563 (2015).
- Health and Safety Executive (HSE): Control of Lead at Work (Third edition) - Control of Lead at Work Regulations 2002: HSE Books, 2002.
- Health and Safety Laboratory (HSL): “MDHS 14/4 - General Methods for Sampling and Gravimetric Analysis of Respirable, Thoracic and Inhalable Aerosols.” HSE, 2014.
- ISO 15202-3:2012. “Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry Part 3: Analysis.” International Standards Organisation, 2012.
- Health and Safety Laboratory (HSL): “MDHS 91 - Metals and Metalloids in Workplace Air by X-ray Fluorescence Spectrometry,” HSE, 1998.
- Mark, D.: The use of dust-collecting cassettes in dust samplers. Ann Occupat Hyg 34(3): 281–291 (1990).
- Kenny, L.C., R. Aitken, C. Chalmers, et al.: A collaborative European study of personal inhalable aerosol sampler performance. Ann Occupat Hyg 41(2):135–153 (1997).
- Kenny, L.C., R.J. Aitken, P.E.J. Baldwin, G.C. Beaumont, and A.D. Maynard: The sampling efficiency of personal inhalable aerosol samplers in low air movement environments. J Aerosol Sci (5):627–638 (1999).
- Bartley, D.L., J.E. Slaven, M.C. Rose, M.E. Andrew, and M. Harper: Uncertainty determination for nondestructive chemical analytical methods using field data and application to XRF analysis for lead. J Occup. Environ. Hyg 4:931–942 (2007).
- Chavalitnitikul, C., and L. Levin: A laboratory evaluation of wipe testing based on lead oxide surface contamination. Am. Industr. Hyg. Assoc. J. 45(5):311–317 (1984).
- American Society for Testing and Materials (ASTM): “Standard Specification for Wipe Sampling Materials for Lead in Surface Dust (ASTM E1792-03).” ASTM, 2011.
- American Society for Testing and Materials (ASTM): “Standard Practice for Collection of Settled Dust Samples using Wipe Sampling Methods for Subsequent Lead Determination (ASTM E1728-10).” ASTM, 2010.
- Wheeler, J.P., and J.D. Stancliffe: Comparison of methods for monitoring solid particulate surface contamination in the workplace. Ann. Occup. Hyg. 42(7):477–488 (1998).
- van Sprang, H.A.: Fundamental parameter methods in XRF spectroscopy. Adv. X-ray Anal. 42:1–10 (2000).
- BSI: BS EN 482:2012 “Workplace Exposure. General Requirements for the Performance of Procedures for the Measurement of Chemical Agents.” BSI Standards Publication, 2012.
- Bland, J.M., and D.G. Altman: Measuring agreement in method comparison studies. Statist. Meth. Med. Res. 8(2):135–160 (1999).
- Harper, M., and K. Ashley: Acid-soluble internal capsules for closed-face cassette elemental sampling and analysis of workplace air. J. Occup. Environ. Hyg. 10:297–306 (2013).
![Supercharge Your Next Research Paper: Research and write your next paper with Jenni AI.]({"type":"image" , "src" : "/sda/112445/Skyscraper-econ.png"})