References
- “Standard for Respiratory Protective Devices,” Code of Federal Regulations Title 42, Part 84. 1995. pp. 546–549.
- Doney, B.C., D.W. Groce, D.L. Campbell, et al.: A survey of private sector respirator use in the United States: an overview of findings. J. Occup. Environ. Hyg. 267–276 (2005).
- Occupational Safety and Health Administration (OSHA): “United States Department of Labor. Respiratory Protection.” Available at https://www.osha.gov/SLTC/respiratoryprotection/index.html (accessed January 20, 2015).
- Friedlander, S.: Theory of aerosol filtration. Aerosol Filtrat. 1161–1164 (1958).
- National Institute for Occupational Safety and Health (NIOSH): Determination of Exhalation Resistance Test, Air Purifying Respirators Standard Testing Procedure Pittsburgh. (2005).
- Johnson, A.: How much work is expended for respirator? Front. Med. Biol. Eng. 265–287 (1993).
- Cho, K., T. Reponen, R. McKay, R. Shukla, H. Haruta, and P. Sekar: Large particle penetration through N95 respirators filters and faceseal leaks with cyclic flow. Ann. Occup. Hyg. 68–77 (2010).
- Cho, K., L. Turkevich, M. Miller, R. McKay, S. Grinshpun, and K. Ha: Penetration of fibers versus spherical particles through filter media and faceseal leakage of n95 filtering facepiece respirators with cyclic flow. J. Occup. Environ. Hyg. 109–115 (2013).
- Eshbaugh, J.P., P.D. Gardner, A.W. Richarson, and K.C. Hofrace: N95 and P100 respirator filter efficiency under high constant and cyclic flow. J. Occup. Environ. Hyg. 52–61 (2009).
- Grinshpun, S., H. Haruta, R. Eninger, T. Reponen, R. McKay, and S. Lee: Performance of an N95 filtering face-piece particulate respirator and a surgical masks during human breathing: two pathways for particle penetration. J. Occup. Environ. Hyg. 593–603 (2009).
- Janssen, L.: Efficiency and pressure drop effects of high concentrations of cement dust on N95 electret filters. J. Int. Soc. Respir. Protect. 75–82 (2004).
- Roberge, R., E. Bayer, J. Powell, A. Coca, M. Roberge, and S. Benson: Effect of exhaled moisture on breathing resistance of N95 filtering facepiece respirators. Ann. Occup. Hyg. 671–677 (2010).
- Cho, H.W., C.S. Yoon, J.H. Lee, S.J. Lee, A. Viner, and E. Johnson: Comparison of pressure drop and filtration efficiency of particulate respirators using welding fumes and sodium chloride. Ann. Occup. Hyg. 666–680 (2011).
- Cho, H., and C. Yoon: Workplace field testing of the pressure drop of particulate respirators using welding fumes. Ann. Occup. Hyg. 948–958 (2012).
- Shaviv, N: “Science Bits.” Available at http://www.sciencebits.com/ExhaleCondCalc?calc=yes (accessed March 13, 2013).
- Miguel, A.: Effect of air humidity on the evolution of permeability and performnce of a fibrous filter during loading with hygroscopic and non-hygroscopic particles. J. Aerosol Sci. 783–799 (2003).
- Durham, J., and R. Harrington: Influence of relative humidity on filtration resistance and efficiency of fabric dust filters. Filtr. Separ. 389–398 (1971).
- Rengasamy, S., and B.C. Eimer: Total inward leakage of nanoparticles through filtering facepiece respirators. Ann. Occup. Hyg. 253–263 (2011).
- Balazy, A., M. Toivola, T. Reponen, A. Podgoeski, A. Zimmer, and S. Grinshpun: Manikin-based performance evaluation of N95 filtering-facepiece respirators challenged with nanoparticles. Ann. Occup. Hyg. 259–269 (2006).
- Janssen, L.L., N.J. Anderson, P.E. Cassidy, R.A. Weber, and T.J. Nelson: Interpretation of inhalation airflow measurements for respirator design and testing. J. Int. Soc. Respir. Protect. 122–141 (2005).
- Siroka, B., M. Noisternig, U.J. Griesser, and T. Bechtold: Characterization of cellulosic fibers and fabrics by sorption/desorption. Carb. Res. 2194–2199 (2008).
- Kongdee, A., T. Bechtold, E. Burtscher, and M. Scheinecker: The influence of wet/dry treatment on pore structure-the correlation of pore parameters, water retention and moisture regain values. Carb. Polym. 39–44 (2004).
- Motyl, E., and B. Lowkis: Effect of air humidity on charge decay and lifetime of PP electret nonwovens. Fib. Text. 39–42 (2006).
- Contal, P., J. Simao, D. Thomas, et al.: Clogging of fibre filters by submicron droplets. Phenomena and influence of operating conditions. Aerosol Sci. 263–278 (2004).
- Gupta, A., V. Novick, P. Biswas, and P. Monson: Effect of humidity and hygroscopicity on the mass loading capacity of high efficiency particulate air (HEPA) filter. Aerosol Sci. Technol. 94–107 (1993).
- Hinds, W.: Aerosol Technology New York: Wiley Inter-science Publication, 1999. pp. 182–205.