Respirable crystalline silica exposures during asphalt pavement milling at eleven highway construction sites

References

• Nieuwenhuijsen, M.J., K.S. Noderer, M.B. Schenker, V. Vallyathan, and S. Olenchock: Personal exposure to dust, endotoxin and crystalline silica in California agriculture. Ann. Occup. Hyg. 43(1):35–42 (1999).
   PubMed Web of Science ®Google Scholar
• Rosenman, K.D., M.J. Reilly, C. Rice, V. Hertzberg, C.Y. Tseng, and H.A. Anderson.A.: Silicosis among foundry workers. Implication for the need to revise the OSHA standard. Am. J. Epidemiol. 144(9):890–900 (1996).
   PubMed Web of Science ®Google Scholar
• Esswein, E.J., M. Breitenstein, J. Snawder, M. Kiefer, and W.K. Sieber: Occupational exposures to respirable crystalline silica during hydraulic fracturing. J. Occup. Environ. Hyg. 10(7):347–356 (2013).
   PubMed Web of Science ®Google Scholar
• Laney, A.S., E.J. Petsonk, and M.D. Attfield: Pneumoconiosis among underground bituminous coal miners in the United States: is silicosis becoming more frequent? Occup. Environ. Med. 67(10):652–656 (2010).
   PubMed Web of Science ®Google Scholar
• Centers for Disease Control and Prevention: Silicosis screening in surface coal miners–Pennsylvania, 1996–1997. MMWR Morb Mortal Wkly. Rep. 49(27):612–615 (2000).
   PubMedGoogle Scholar
• Verma, D.K., G.S. Rajhans, O.P. Malik, and K. des Tombe: Respirable dust and respirable silica exposure in Ontario gold mines. J. Occup. Environ. Hyg. 11(2):111–116 (2014).
   PubMed Web of Science ®Google Scholar
• Grove, T., T.V. Dyk, A. Franken, and J. Du Plessis: The evaluation and quantification of respirable coal and silica dust concentrations: a task-based approach. J. Occup. Environ. Hyg. 11(6):406--414 (2013).
   Web of Science ®Google Scholar
• Radnoff, D.L., and M.K. Kutz: Exposure to crystalline silica in abrasive blasting operations where silica and non-silica abrasives are used. Ann. Occup. Hyg. 58(1):19–27 (2014).
   PubMed Web of Science ®Google Scholar
• Healy, C.B., M.A. Coggins, M. Van Tongeren, L. MacCalman, and P. McGowan: Determinants of respirable crystalline silica exposure among stoneworkers involved in stone restoration work. Ann. Occup. Hyg. 58(1): 6–18 (2014).
   PubMed Web of Science ®Google Scholar
• Phillips, M.L., D.L. Johnson, and A.C. Johnson: Determinants of respirable silica exposure in stone countertop fabrication: a preliminary study. J. Occup. Environ. Hyg. 10(7):368–373 (2013).
   PubMed Web of Science ®Google Scholar
• Radnoff, D., M.S. Todor, and J. Beach: Occupational exposure to crystalline silica at Alberta work sites. J. Occup. Environ. Hyg. 11(9):557--570 (2014).
   PubMed Web of Science ®Google Scholar
• Radnoff, D., M.S. Todor, and J. Beach: Exposure to crystalline silica at Alberta work sites: review of controls. J. Occup. Environ. Hyg. 12(6):393–403 (2015).
   PubMedGoogle Scholar
• Gottesfeld, P., D. Andrew, and J. Dalhoff: Silica exposures in artisanal small-scale gold mining in Tanzania and Implications for tuberculosis prevention. J. Occup. Environ. Hyg. 12(9):647–653 (2015).
   PubMed Web of Science ®Google Scholar
• Rappaport, S.M., M. Goldberg, P. Susi, and R.F. Herrick: Excessive exposure to silica in the US construction industry. Ann. Occup. Hyg. 47(2):111–122 (2003).
   PubMed Web of Science ®Google Scholar
• Beaudry, C., J. Lavoue, J.F. Sauve, et al.: Occupational exposure to silica in construction workers: a literature-based exposure database. J. Occup. Environ. Hyg. 10(2):71–77 (2013).
   PubMed Web of Science ®Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): Respirable Crystalline Silica Exposures during Tuck Pointing. DHHS (NIOSH), Publication No. 2000–113. Cincinnati, OH: NIOSH, 2000.
   Google Scholar
• Thorpe, A., A.S. Ritchie, M.J. Gibson, and R.C. Brown: Measurements of the effectiveness of dust control on cut-off saws used in the construction industry. Ann. Occup. Hyg. 43(7):443–456 (1999).
   PubMed Web of Science ®Google Scholar
• Echt, A., and W.K. Sieber: Control of silica exposure from hand tools in construction: grinding concrete. Appl. Occup. Environ. Hyg. 17(7):457–461 (2002).
   PubMedGoogle Scholar
• Shepherd, S., and S. Woskie: Controlling dust from concrete saw cutting. J. Occup. Environ. Hyg. 10(2):64–70 (2013).
   PubMed Web of Science ®Google Scholar
• Akbar-Khanzadeh, F., and R.L. Brillhart: Respirable crystalline silica dust exposure during concrete finishing (grinding) using hand-held grinders in the construction industry. Ann. Occup. Hyg. 46(3):341–346 (2002).
   PubMed Web of Science ®Google Scholar
• Echt, A., W. Sieber, A. Jones, and E. Jones: Control of silica exposure in construction: scabbling concrete. Appl. Occup. Environ. Hyg. 17(12):809–813 (2002).
   PubMedGoogle Scholar
• Echt, A., K. Sieber, E. Jones, et al.: Control of respirable dust and crystalline silica from breaking concrete with a jackhammer. Appl. Occup. Environ. Hyg. 18(7):491–495 (2003).
   PubMedGoogle Scholar
• Hall, R.M., C. Achutan, R. Sollberger, R.E. McCleery, and M. Rodriguez: Exposure assessment for roofers exposed to silica during installation of roof tiles. J. Occup. Environ. Hyg. 10(1):D6–10 (2013).
   PubMed Web of Science ®Google Scholar
• Glindmeyer, H.W., and Y.Y. Hammad: Contributing factors to sandblasters' silicosis: inadequate respiratory protection equipment and standards. J. Occup. Med. 30(12):917–921 (1988).
   PubMedGoogle Scholar
• Linch, K.D.: Respirable concrete dust–silicosis hazard in the construction industry. Appl. Occup. Environ. Hyg. 17(3): 209–221 (2002).
   PubMedGoogle Scholar
• Valiante, D.J., D.P. Schill, K.D. Rosenman, and E. Socie: Highway repair: a new silicosis threat. Am. J. Public Health 94(5):876–880 (2004).
   PubMed Web of Science ®Google Scholar
• Public Works: “Pavement recycling.” Public Works 125 (1995).
   Google Scholar
• United States Census Bureau: “Census Statistics of US Businesses NAICS 237310. Highway, Street, and Bridge Construction” Washington D.C: Highway, Street, and Bridge Construction: U.S. Department of Commerce, 2012.
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): “Dust-control technology for Asphalt-Pavement Milling Controlled-Site Testing at State Highway 47, Bonduel, Wisconsin.” DHHS (NIOSH), EPHB Report No. 282–18a, Cincinnati, OH: NIOSH, 2011.
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): “A Laboratory Evaluation of Capture Efficiencies of the Vacuum Cutting System on a Wirtgen W 250 Cold Milling Machine at Payne & Dolan Inc., Racine, Wisconsin.” DHHS (NIOSH), EPHB Report No. 282–19a, Cincinnati, OH: NIOSH, 2011.
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): “A Laboratory Evaluation of a Local Exhaust Ventilation System on a Roadtec Cold Milling Machine at Roadtec, Chattanooga, Tennessee.” DHHS (NIOSH), EPHB Report No. 282–21a, Cincinnati, OH: NIOSH, 2013.
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): “NIOSH Hazard Review: Health Effects of Occupational Exposure to Respirable Crystalline Silica.” DHHS (NIOSH), Publication No. 2002–129, Cincinnati, OH: NIOSH, 2002.
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): “Silicosis: Most Frequently Recorded Industries on Death Certificate, U.S. Residents Age 15 and Over, Selected States and Years, 1990–1999, Table 3–6.” In NIOSH Work-Related Lung Disease Surveillance Report 2007. DHHS (NIOSH), Publication No. 2008–143a, Cincinnati, OH: NIOSH, 2007.
   Google Scholar
• CFR: “Code of Federal Regulations.”Washington, D.C:U.S. Government Printing Office, 29 CFR 1926.55, 2003.
   Google Scholar
• Occupational Safety and Health Administration (OSHA): “Appendix F: Permissible Exposure Limits for Construction and Maritime.” In: Memorandum of May 2, 1996, from Joseph A. Dear., Washington, D.C:Occupational Safety and Health Administration, to regional administrators, 1996.
   Google Scholar
• Occupational Safety and Health Administration (OSHA): “Appendix E: Conversion Factor for Silica PELs in Construction and Maritime.” In National Emphasis Program—Crystalline Silica., Washington, D.C: Occupational Safety and Health Administration, CPL 03-00-007, 2008.
   Google Scholar
• Occupational Safety and Health Administration (OSHA): “Occupational Exposure to Respirable Crystalline Silica, A Proposed Rule by the Occupational Safety and Health Administration on 09/12/2013.” 78 Fed. Reg. 56274, 2013.
   Google Scholar
• ACGIH: 2013 Threshold Limit Values (TLVs) and Biological Exposure Indices (BEIs). Cincinnati, OH: ACGIH, 2013.
   Google Scholar
• ACGIH: 2010 Documentation to the TLV Silica, Crystalline – α-quartz and Cristobalite. Cincinnati, OH: ACGIH, 2010.
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): “Best Practice Engineering Control Guidelines to Control Worker Exposure to Respirable Crystalline Silica during Asphalt Pavement Milling.” DHHS (NIOSH) Publication No. 2015–105, Cincinnati, OH: NIOSH, 2015.
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): “Particulates not Otherwise Regulated, Respirable.” Publication No. 81–123, Cincinnati, OH: NIOSH, 1998.
   Google Scholar
• National Institute for Occupational Safety and Health (NIOSH): “Silica, Crystalline, by XRD (Filter Redeposition).” Publication No. 2003–154, Cincinnati, OH: NIOSH, 2003.
   Google Scholar
• Rappaport, S.M., and L.L. Kupper: Quantitative Exposure Assessment. El Cerrito, CA: Stephen Rappaport, 2008, pp. 27, 31.
   Google Scholar
• Krishnamoorthy, K., and J. Peng: Approximate one-sided tolerance limits in random effects model and in some mixed models and comparisons. J. Statist. Computat. Simul. 85(8):1651–1666 (2014).
   Web of Science ®Google Scholar
• Krishnamoorthy, K., and T. Mathew: One-sided tolerance limits in balanced and unbalanced one-way random models based on generalized confidence intervals. Technometrics 46(1):44–52 (2004).
   Web of Science ®Google Scholar
• Liao, C.T., T.Y. Lin, and H.K. Iyer: One- and two-sided tolerance intervals for general balanced mixed models and unbalanced one-way random models. Technometrics 47(3):323–335 (2005).
   Web of Science ®Google Scholar
• Ogden, T., and J. Lavoué: 2011 William P. Yant Award Lecture. J. Occup. Environ. Hyg. 9(4):D63–D70 (2012).
   PubMed Web of Science ®Google Scholar
• Littell, R.C., G.A. Milliken, W.W. Stroup, R.D. Wolfinger, and O. Schabenberger: SAS System for Mixed Models, 2nd ed. Cary, NC: SAS Institute, 2006; p. 80.
   Google Scholar
• Scheipl, F., S. Greven, and H. Küchenhoff: Size and power of tests for a zero random effect variance or polynomial regression in additive and linear mixed models. Computat. Statist. Data Anal. 52(7):3283–3299 (2008).
   Web of Science ®Google Scholar
• Hornung, R.W., and L.D. Reed: Estimation of average concentration in the presence of nondetectable values. Appl. Occup. Environ. Hyg. 5(1):46–51 (1990).
   Google Scholar
• Daniel, C., and F. Wood: Fitting Equations to Data. New York: John Wiley and Sons, Inc., 1980. pp. 86–87.
   Google Scholar