References
- U.S. Department of Labor: Explosion Hazard in Mining, by J. Nagy. MSHA Information Report No. 1119, Mine Safety and Health Administration, 1981.
- U.S. Department of Labor: MSHA Program Informational Bulletin: Availability of a Report on the use of the Coal Dust Explosibility Meter. Publication No. P13-01. Mine Safety and Health Administration, February 2013.
- Amyotte, P.R., K.J. Mintz, and M.J. Pegg: Effectiveness of various rock dusts as agents of coal dust inerting. J. Loss Prevent Proc. 5(3):196–199 (1992).
- U.S. Department of Health and Human Services: Non-conforming Rock Dust. DHHS (NIOSH) Publication No. 2012-102, HID 16. Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, February 2012.
- U.S. Department of Health and Human Services: Coal Dust Explosibility Meter Evaluation and Recommendations for Application, by M.L. Harris, M.J. Sapko, and F.D. Varley. DHHS (NIOSH) Publication No. 2012-172. Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2012.
- U.S. Department of Health and Human Services: “Mining Contract: Development of an Anti-Caking Rock Dust.” Available at www.cdc.gov/niosh/mining//researchprogram/contracts/contract200-2012-52496.html (accessed March 30, 2015).
- U.S. Department of Health and Human Services: Recommendations for a New Rock Dust Standard to Prevent Coal Dust Explosions in Intake Airways, by K.L. Cashdollar, M.J. Sapko, E.S. Weiss, M.L. Harris, C. Man, S.P. Harteis, and G.M. Green. DHHS (NIOSH) Publication No. 2010–151, RI 9679. Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 2010.
- U.S. Code of Federal Regulations: Title 30─Mandatory safety standards, Part 75─underground coal mines, Subpart E–Combustible Dusts and rock Dusting. 75.403– Maintenance of incombustible content of rock dust. National Archives and Records Administration. Washington, DC: Office of the Federal Register.
- U.S. Code of Federal Regulations: Title 30─Mandatory safety standards, Part 75─underground coal mines, Subpart A–General. 75.2–Definitions (Rock Dust). National Archives and Records Administration. Washington, DC: Office of the Federal Register.
- Colinet, J.F., and J.M. Listak: Silica and respirable content in rock dust samples. Coal Age. 117(12):48–52 (2012).
- Stricklin, K.G., and L.F. Zeiler: Rock Dust Composition, 30 C.F.R. Part 75.2. Program Information Bulletin No. P11-50, US Department of Labor, Mine Safety and Health Administration, Arlington, VA, October 27, 2011.
- Cybulski, W.G.: Coal dust explosions and their suppression. NTIS No. TT 73-54001. Translated from Polish. National Center for Scientific, Technical and Economic Information (1975).
- Lee, T., S. Kim, W.P. Chisholm, J. Slaven, and M. Harper: Performance of high flow rate samplers for respirable particle collection. Ann. Occup. Hyg. 54(6):697–709 (2010).
- Soo, J.C., T. Lee, M. Kashon, M. Kusti, and M. Harper: Coal dust deposit on internal surface of respirable size selective samplers. J. Occup. Environ. Hyg. 11:D215–D219 (2014).
- National Institute for Occupational Safety and Health: Method 0600. In NIOSH Manual of Analytical Methods, 4th ed. Particulates not otherwise regulated, respirable. Cincinnati, OH: NIOSH, 1998.
- National Institute for Occupational Safety and Health: Method 7603. In NIOSH Manual of Analytical Methods, 4th ed. QUARTZ in coal mine dust, by IR (redeposition). Cincinnati, OH: NIOSH, 2003.
- Farcas, D., T. Lee, W.P. Chisholm, J.C. Soo, and M. Harper: Replacement of filters for respirable quartz measurement in coal mine dust by infrared. J. Occup. Environ. Hyg. 13:D16–D22 (2016).
- Page, S.J.: Crystalline silica analysis: a comparison of calibration materials and recent coal mine dust size distributions. Am. Ind. Hyg. Assoc. J. 64:30–39 (2003).
- Marple, V.A., and K.L. Rubow: A dust generator for laboratory use. Am. Ind. Hyg Assoc. J. 39:26–32 (1978).
- Lee, T., W.P. Chisholm, J. Slaven, and M. Harper: Size Distributions of 0.5 to 20 μm aerodynamic diameter lead-containing particles from aerosol sampler walls and filters. Aerosol Sci. Tech. 43(10):1042–1050 (2009).