References
- Mine Safety and Health Administration (MSHA): “Historical Data on Mine Disasters in the United States.” Available at http://www.msha.gov/MSHAINFO/FactSheets/MSHAFCT8/htm (accessed March 2016).
- “Combustible Materials and Rock Dusting.” Available at https://www.gpo.gov/MSHA/30CFR_74/SubpartE (accessed March 2016).
- U.S. Department of Health and Human Services: Recommendations for a New Rock Dusting Standard to Prevent Coal Dust Explosions in Intake Airways, by K.L Cashdollar, G.M. Green, S.P. Harteis, C.K Mann, M.J. Sapko, and E.S. Weiss ( Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, Office of Mine Safety and Health Research, DHHS (NIOSH) Publication No. 2010-151, Report of Investigations 9679). U.S. Department of Health and Human Services, May 2010.
- Patts, J.R., J.F. Colinet, S.J. Janisko, T. Barone, and L.D. Patts: Reducing float coal dust: Field evaluation of an inline auxiliary fan scrubber. Mining Eng. 68(12):63–68 (2016).
- Prostański, D.: Use of air-and-water spraying systems for improving dust control in mines. J. Sust. Min. 12(2):29–34 (2013).
- Janisko, S.J., J.F. Colinet, J.R. Patts, T. Barone, and L.D. Patts: Field Evaluation of an Inline Wet Scrubber for Reducing Float Coal Dust on a Continuous Miner Section. Littleton, CO: Society for Mining, Metallurgy and Exploration, 2015.
- Barone, T.L, J.R. Patts, S.J. Janisko, et al.: Sampling and analysis method for measuring airborne coal dust mass in mixtures with limestone (rock) dust. J. Occup. Environ. Hyg. 13(4):284–292 (2016).
- Potts, J.D., M.A. McCawley, and R.A. Jankowski: Thoracic dust exposures on longwall and continuous mining sections. Appl. Occup. Environ. Hyg. 7(5):440–447 (1990).
- Rider, J., and J. Colinet: Benchmarking longwall dust control technology and practices. Mining Eng. 63(9):74–80 (2011).
- Tomb, T., R. Ondrey, R. Stoltz, et al.: Evaluation of Respirable Dust Control on Longwall Mining Operations. Littleton, CO: Society for Mining, Metallurgy and Exploration Transactions, 1991. Vol. 288.
- Rider, J.R. and J.F. Colinet: Dust Control on Longwalls–assessment of the State-of-the-art.” In: Proceedings of the 11th U.S./North American Mine Ventilation Symposium, Boca Raton, FL: CRC Press, 2006.
- Hinds, W.: Sampling and measurement concentration. Aerosol Technol. 10(1):206–213(1999).
- Vincent, J.H., P.C. Emmett, and D. Mark: The effects of turbulence on the entry of airborne particles into a blunt dust sampler. Aerosol Sci. Technol. 4(1):17–29 (1985).
- Hertzberg, M. and K.L. Cashdollar: Introduction to Dust Explosions. In Industrial Dust Explosions, K.L. Cashdollar, and M. Hertzberg (eds.). Philadelphia, PA: American Society for Testing and Materials, 1987. pp. 5–32.
- Ausatralian Coal Association: Reduction of Dust in Return Roadways of Longwall Faces, by B. Barker and D. Humphreys ( Report C3082). Australian Coal Research Limited, 1996.
- Paik, S., and J.H. Vincent: Aspiration efficiencies of disc-shaped blunt nozzles facing the wind for coarse particles and high velocity ratios. J. Aerosol Sci. 33(11):1509–1523 (2002).
- Cossey, J.R., and N.P. Vaughan: A higher-flow rate cyclone for determination of respirable dust. Ann. Occup. Hyg. 31(1):39–52 (1987).
- Liden, G., B. Melin, A. Lidblom, K. Lindberg, and J.O. Moren: Personal sampling in parallel with open-face filter cassettes and IOM samplers for inhalable dust-implications for occupational exposure limits. Appl. Occup. Environ. Hyg. 15(3):263–276. (2000).
- Wedding, J.B., A.R. McFarland, and J.E. Cermak: Large particle collection characteristics of ambient aerosol samplers. Environ. Sci. Technol. 4:387–390 (1977).
- Kennedy, N.J., and W.C. Hinds: Inhalability of large solid particles. J. Aerosol Sci. 33(2):237–255 (2002).
- Kenny, L.C., R. Aitken, C. Chalmers, et al.: A collaborative European study of personal inhalable aerosol sampler performance. Ann. Occup. Hyg. 41(2):135–153 (1997).
- Koehler, K.A., T.R. Anthony, M. Van Dyke, and J. Volckens: A rotating bluff-body disc for reduced variability in wind tunnel aerosol studies. Ann. Occup. Hyg. 55(1):86–96 (2011).
- Witschger, O., R. Wrobel, J.F. Fabriés, P. Görner, and A. Renoux: A new experimental wind tunnel facility for aerosol sampling investigations. J. Aerosol Sci. 28(5):833–851 (1997).
- Mark D. and J.H. Vincent: A new personal sampler for airborne total dust in workplaces. Ann. Occup. Hyg. 30(1):89–102 (1986).
- Mark, D.: The use of dust-collecting cassettes in dust samplers. Ann. Occup. Hyg. 34(3):281–291 (1990).
- Mine Safety and Health Administration (MSHA): Sampling Procedure, Metal Dusts, Fumes and Mists, Metal/Nonmetal Health Inspection Procedures Handbook. Arlington, VA: U.S. Department of Labor, 2006.
- Kissell, F.N., S.K. Ruggieri, and R.A. Jankowski: How to improve the accuracy of coal mine dust sampling. Am. Indust. Hyg. Assoc. J. 47(10):602–606 (1986).
![Supercharge Your Next Research Paper: Research and write your next paper with Jenni AI.]({"type":"image" , "src" : "/sda/112445/Skyscraper-econ.png"})