References
- Ashley K, Andrews R, Cavazos L, Demange M. 2001. Ultrasonic extraction as a sample preparation technique for elemental analysis by atomic spectrometry. J Anal at Spectrom. 16(10):1147–1153. doi: 10.1039/b102027g.
- Ashley K, Harper M. 2013. Closed-face filter cassette (CFC) sampling – Guidance on procedures for inclusion of material adhering to internal sampler surfaces. J Occup Environ Hyg. 10(3):D29–D33. doi: 10.1080/15459624.2012.750554.
- ASTM International (ASTM). 2021. ASTM D8358, standard guide for assessment and inclusion of wall deposits in the analysis of single-stage samplers for airborne particulate matter. W. Conshohocken, PA: ASTM International; www.astm.org.
- Chisholm WP, Lee T, Slaven JS, Nelson J, Harper M. 2012. Comparison of filter and wall deposits from samplers used to collect airborne lead-containing dusts at field sites. Aerosol Sci Technol. 46(4):411–418. doi: 10.1080/02786826.2011.635726.
- Demange M, Görner P, Elcabache J-M, Wrobel R. 2002. Field comparison of 37-mm closed-face cassettes and IOM samplers. Appl Occup Environ Hyg. 17(3):200–208. doi: 10.1080/104732202753438289.
- Duquenne P, Simon X, Demange V, Harper M, Wild P. 2015. Endotoxin deposits on the inner surfaces of closed-face cassettes during bioaerosol sampling: a field investigation at composting facilities. Ann Occup Hyg. 59(4):504–513. doi: 10.1093/annhyg/meu108.
- Griffin G. 2024. Chief Site Assessor, American Industrial Hygiene Association Laboratory Accreditation Programs, LLC. Personal communication, March 14, 2024.
- Harper M, Pacolay B. 2006. A comparison of X-ray fluorescence and wet chemical analysis for lead on air filters from different personal samplers used in a secondary lead smelter/solder manufacturer. J Environ Monit. 8(1):140–146. doi: 10.1039/b504719f.
- Harper M, Demange M. 2007. Concerning sampler wall deposits in the chemical analysis of airborne metals. J Occup Environ Hyg. 4(9):D81–D86. doi: 10.1080/15459620701493149.
- Harper M. 2019. Part of the sample: What wall deposits mean for your samples – And what you should do about it. Synergist. 30(1):26–29.
- Hendricks W, Stones F, Lillquist D. 2009. On wiping the interior walls of 37-mm closed-face cassettes—An OSHA perspective. J Occup Environ Hyg. 6(12):732–734. doi: 10.1080/15459620903012028.
- International Organization for Standardization (ISO). 2017. ISO 17025, General requirements for the competence of testing and calibration laboratories. Geneva: ISO. www.iso.org.
- Institut National de Recherche et de Securité (INRS). 2015. Métaux – Métalloïdes (Metals – Metalloids) [M-122]. In Méthodes de Prélèvement et d’Analyse de l’Air (Air Sampling and Analysis Methods). Paris: INRS. www.inrs.fr/publications.
- National Institute for Occupational Safety and Health (NIOSH). 2003. Elements by ICP (aqua regia ashing) [method 7301]. In Schlecht P, O’Connor P, editor. NIOSH manual of analytical methods. 4th ed. Cincinnati: NIOSH. https://www.cdc.gov/niosh/docs/2003-154/pdfs/7301.pdf.
- National Institute for Occupational Safety and Health (NIOSH). 2015a. Elements by cellulosic internal capsule sampler [method 7306]. In Ashley K, O’Connor P, editor. http://www.cdc.gov/niosh/nmam NIOSH manual of analytical methods, 5th ed. Cincinnati: NIOSH. www.cdc.gov/niosh/nmam.
- National Institute for Occupational Safety and Health (NIOSH). 2015b. Particulates not otherwise regulated, total [method 0501]; and carbon black [method 5100]. In Ashley K, O’Connor P, editor. NIOSH manual of analytical methods. 5th ed. Cincinnati: NIOSH. www.cdc.gov/niosh/nmam.
- Occupational Safety and Health Administration (OSHA). 2002. Method ID-125G. Metal and metalloid particulates in workplace atmospheres (ICP analysis). In OSHA sampling and analytical methods. Sandy, UT: OSHA. www.osha.gov/dts/sltc/methods.
- Occupational Safety and Health Administration (OSHA). 2003. Method PV2121. Gravimetric determination. In OSHA sampling and analytical methods. Sandy, UT: OSHA. www.osha.gov/dts/sltc/methods.
- Occupational Safety and Health Administration (OSHA). 2019. Method 5003. Metals sampling group 1 – Metals collected on mixed cellulose ester filters. In OSHA sampling and analytical methods. Sandy, UT: OSHA. www.osha.gov/dts/sltc/methods.
- Paulus HJ, Talvitie NA, Fraser DA, Keenan RG. 1957. Use of membrane filters in air sampling. Am Ind Hyg Assoc Q. 18(3):267–273. doi: 10.1080/00968205709343505.