REFERENCES
- B.J. Carter, P.A Wawrzynek, and A.R. Ingraffea, Automated 3-D Crack Growth Simulation, Int. J. Numer. Meth. Engng., vol. 47, pp. 229–253, 2000.
- R. Branco, F.V. Antunes, J.D. Costa, and J. Barbosa, Numerical Modeling of Fatigue Crack Growth in Shafts under Tension and Bending: Proc. 3rd Int. Conf. on Integrity, Reliability and Failure, Porto, Portugal, chap. XVIII, pp. 553–565, 2009.
- S.A. Fawaz, B. Andersson, and J.C. Newman Jr., Experimental Verification of Stress Intensity Factor Solutions for Corner Cracks at a Hole Subject to General Loading: Proc. of the 22nd Symposium of the International Committee on Aeronautical Fatigue, Lucerne, Switzerland, pp. 1–31, 2003.
- I.S. Raju and J.C. Newman Jr., Analyses of Surface Cracks in Finite Plates Under Tension or Bending Loads, NASA TP-1578, National Aeronautics and Space Administration, Washington, DC, 1979.
- A. Chahardehi, F.P. Brennan, and S.K. Han, Surface Crack Shape Evolution Modeling Using an RMS SIF Approach, Int. J. Fatigue, vol. 32, pp. 297–301, 2010.
- R.V. Guchinsky and S.V. Petinov, Fatigue of Fillet-welded Joint Assessment by the FEA Simulation of Damage Accumulation, Mag. Civil Eng., vol. 4, no. 22, pp. 5–9, 2011.
- I.K. Korolev, S.V. Petinov, and A.B. Freidin, Numerical Simulation of Damage Accumulation and Fatigue Crack Growth in Elastic Materials, Comput. Continuum Mech., vol. 2, no. 3, pp. 34–43, 2008.
- G. Glinka, A Cumulative Model of Fatigue Crack Growth, Int. J. Fatigue, vol. 4, no 2, pp. 59–67, 1982.
- F. Ellyin and C.O.A. Fakinlede, Probabilistic Simulation of Fatigue Crack Growth by Damage Accumulation, Eng. Fract. Mech, vol. 22, no 4, pp. 697–712, 1985.
- S.M. Marco and W.L. Starkey, A Concept of Fatigue Damage, Trans. ASME, vol. 76, pp. 627–632, 1954.
- W. Rudd and D. Shuter, Properties and Service Performance. Studies of the Mechanism of History Effects in Fatigue and Corrosion Fatigue, EUR 13960 EN, Office for Official Publications of the European Communities, Luxembourg, 1997.
- N.A. Fleck, I.F.C. Smith, and R.A. Smith, Closure Behavior of Surface Cracks, Fatigue Fract. Eng. Mater. Struct., vol. 6, pp. 225–239, 1983.
- S.S. Manson, Fatigue: A Complex Subject - Some Simple Approximations, Exp. Mech., vol. 7, pp. 193–225, 1965.
- N.A. Makhutov, The Strain-Life Criteria and The Strength Calculation of the Machine Parts, pp. 40–42, Mashinostroenie, Moscow, 1981.
- J. Lemaitre and R. Desmorat, Engineering Damage Mechanics. Ductile, Creep, Fatigue and Brittle Failures, pp. 16–17, Springer-Verlag, 2005.
- W. Elber, The Significance of Fatigue Crack Closure Under Cyclic Tension, Damage Tolerance in Aircraft Structures, ASTM STP 486, American Society for Testing and Material, Philadelphia, 1971, pp. 230–242.
- J.C. Newman Jr., A Crack Closure Model for Predicting Fatigue Crack Growth Under Aircraft Spectrum Loading. Methods and Models for Predicting Fatigue Crack Growth Under Random Loading, ASTM STP 748, pp. 53–84, 1981.
- J.D. Skinner and S.R. Daniewicz, Simulation of Plasticity-Induced Fatigue Closure in Part-Through Cracked Geometries Using Finite Element Analysis, Engng. Fract. Mech., vol. 69, pp. 1–11, 2002.
- J. Wu and F. Ellyin, A Study of Fatigue Crack Closure by Elastic-Plastic Finite Element Analysis for Constant-Amplitude Loading, Int. J. Frac., vol. 82, pp. 43–65, 1996.
- J. Toribio, J.C. Matos, B. González, and J. Escuadra, Modeling of Crack Path Evolution in Round Bars under Cyclic Tension and Bending: Proc. 4th Int. Conf. on Fatigue Crack Paths, Gaeta, Italy, pp. 513–520, 2012.
- W.O. Soboyejo and J.F Knott, An Investigation of Crack Closure and the Propagation of Semi-Elliptical Fatigue Cracks in Q1N Pressure Vessel Steel, Int. J. Fatigue, vol. 17, pp. 577–581, 1995.