References
- F. Moukalled and M. Darwish, “A high resolution pressure-based algorithm for fluid flow at all speeds,” J. Comput. Phys., vol. 168, no. 1, pp. 101–133, 2001. DOI: https://doi.org/10.1006/jcph.2000.6683.
- W. Rodi, S. Majumdar, and B. Schonung, “Finite volume methods for two-dimensional incompressible flows with complex boundaries,” Comput. Methods Appl. Mech. Eng., vol. 75, no. 1-3, pp. 369–392, 1989. DOI: https://doi.org/10.1016/0045-7825(89)90037-6.
- M. Darwish, I. Sraj, and F. Moukalled, “A coupled finite volume solver for the solution of incompressible flows on unstructured grids,” J. Comput. Phys., vol. 228, no. 1, pp. 180–201, 2009. DOI: https://doi.org/10.1016/j.jcp.2008.08.027.
- W. Xu, L. Zhang, and F. Xu, “Numerical study on the suppression of the oscillating wake of a square cylinder by a traveling wave wall,” Int. J. Comput. Methods Eng. Sci. Mech., vol. 20, no. 1, pp. 48–63, 2019. DOI: https://doi.org/10.1080/15502287.2018.1538269.
- K. Ramesh and V. Joshi, “Numerical solutions for unsteady flows of a magneto-hydrodynamic Jeffrey fluid between parallel plates through a porous medium,” Int. J. Comput. Methods Eng. Sci. Mech., vol. 20, no. 1, pp. 1–13, 2019. DOI: https://doi.org/10.1080/15502287.2018.1520322.
- A. Salih and S. G. Moulic, “A mass conservation scheme for level set method applied to multiphase incompressible flows,” Int. J. Comput. Methods Eng. Sci. Mech., vol. 14, no. 4, pp. 271–289, 2013. DOI: https://doi.org/10.1080/15502287.2012.711991.
- M. R. Moosavi et al., “Nonlinear internal fluid structure interaction by finite volume methods in both domains,” Int. J. Comput. Methods Eng. Sci. Mech., vol. 16, no. 2, pp. 86–98, 2015. DOI: https://doi.org/10.1080/15502287.2015.1009578.
- F. Moukalled and M. Darwish, “Pressure-based algorithms for single-fluid and multifluid flows,” in Handbook of Numerical Heat Transfer, 2nd ed. Wiley, 2006, pp. 325–367.
- F. Denner, F. Evrard, and B. G. M. van Wachem, “Conservative finite-volume framework and pressure-based algorithm for flows of incompressible, ideal-gas and real-gas fluids at all speeds,” J. Comput. Phys., vol. 409, pp. 109348, 2020. DOI: https://doi.org/10.1016/j.jcp.2020.109348.
- Z. J. Chen and A. J. Przekwas, “A coupled pressure-based computational method for incompressible/compressible flows,” J. Comput. Phys., vol. 229, no. 24, pp. 9150–9165, 2010. DOI: https://doi.org/10.1016/j.jcp.2010.08.029.
- L. D. Tran, C. Masson, and A. Smaïli, “A stable second-order mass-weighted upwind scheme for unstructured meshes,” Int. J. Numer. Meth. Fluids, vol. 51, no. 7, pp. 749–771, 2006. DOI: https://doi.org/10.1002/fld.1146.
- I. Ammara and C. Masson, “Development of a fully coupled control-volume finite element method for the incompressible Navier–Stokes equations,” Int. J. Numer. Meth. Fluids, vol. 44, no. 6, pp. 621–644, 2004. DOI: https://doi.org/10.1002/fld.662.
- A. Elfaghi, A. A. Omar, and W. Asrar, “Higher-order compact-flow field-dependent variation (HOC-FDV) method for solving two-dimensional Navier-Stokes equations,” Int. J. Comput. Methods Eng. Sci. Mech., vol. 16, no. 4, pp. 256–263, 2015. DOI: https://doi.org/10.1080/15502287.2015.1048386.
- R. F. Hanby, D. J. Silvester, and J. W. Chew, “A comparison of coupled and segregated iterative solution techniques for incompressible swirling flow,” Int. J. Numer. Meth. Fluids, vol. 22, no. 5, pp. 353–373, 1996. DOI: https://doi.org/10.1002/(SICI)1097-0363(19960315)22:5<353::AID-FLD327>3.0.CO;2-Z.
- F. H. Harlow and J. E. Welch, “Numerical calculation of time-dependent viscous incompressible flow of fluid with free surface,” Phys. Fluids, vol. 8, no. 12, pp. 2182–2189, 1965. DOI: https://doi.org/10.1063/1.1761178.
- A. J. Chorin, “Numerical solution of the Navier–Stokes equation,” Math. Comput., vol. 22, no. 104, pp. 745–762, 1968. DOI: https://doi.org/10.1090/S0025-5718-1968-0242392-2.
- S. V. Patankar and D. B. Spadling, “A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows,” Int. J. Heat Mass Transfer, vol. 15, no. 10, pp. 1787–1806, 1972. DOI: https://doi.org/10.1016/0017-9310(72)90054-3.
- F. M. M. Darwish, “A unified formulation of the segregated class of algorithms for fluid flow at all speeds,” Numer. Heat Transfer, Part B, vol. 37, no. 1, pp. 103–139, 2000. DOI: https://doi.org/10.1080/104077900275576.
- C. M. Rhie and W. L. Chow, “Numerical study of the turbulent flow past an airfoil with trailing edge separation,” AIAA J., vol. 21, no. 11, pp. 1525–1532, 1983. DOI: https://doi.org/10.2514/3.8284.
- B. Zogheib and M. Barron, “Velocity–pressure coupling in finite difference formulations for the Navier–Stokes equations,” Int. J. Numer. Meth. Fluids, vol. 65, no. 9, pp. 1096–1114, 2011. DOI: https://doi.org/10.1002/fld.2231.
- J. Li, Q. Zhang, and Z. Zhai, “An efficient segregated algorithm for two-dimensional incompressible fluid flow and heat transfer problems with unstructured grids,” Int. J. Heat Mass Transfer, vol. 133, pp. 1052–1064, 2019. DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2018.12.039.
- H. J. Aguerre, C. M. Venier, C. I. Pairetti, S. M. Damián, and N. M. Nigro, “A SIMPLE-based algorithm with enhanced velocity corrections: The COMPLEX method,” Comput. Fluids, vol. 198, 2020.
- H. Zhang, W. B. Zhu, and H. Chen, “A robust and efficient segregated algorithm for fluid flow: The EPPL method,” J. Comput. Phys., vol. 423, pp. 109823, 2020. DOI: https://doi.org/10.1016/j.jcp.2020.109823.
- J. Martínez, F. Piscaglia, A. Montorfanoa, A. Onorati, and S. M. Aithal, “Influence of momentum interpolation methods on the accuracy and convergence of pressure–velocity coupling algorithms in OpenFOAM,” J. Comput. Appl. Math., vol. 309, pp. 654–673, 2017. DOI: https://doi.org/10.1016/j.cam.2016.03.037.
- S. M. H. Karimian and G. E. Schneider, “Pressure-based control-volume finite element method for flow at all speeds,” AIAA J., vol. 33, no. 9, pp. 1611–1619, 1995. DOI: https://doi.org/10.2514/3.12700.
- H. Alisadeghi and S. M. H. Karimian, “Different modelings of cell-face velocities and their effects on the pressure-velocity coupling, accuracy and convergence of solution,” Int. J. Numer. Meth. Fluids, vol. 65, no. 8, pp. 969–988, 2011. DOI: https://doi.org/10.1002/fld.2224.
- H. Alisadeghi and S. M. H. Karimian, “Comparison of different solution algorithms for collocated method of MCIM to calculate steady and unsteady incompressible flows on unstructured grids,” Comput. Fluids, vol. 46, no. 1, pp. 94–100, 2011. DOI: https://doi.org/10.1016/j.compfluid.2010.12.002.
- W. J. Minkowycz, E. M. Sparrow, G. E. Schneider, and R. H. Pletcher, Handbook of Numerical Heat Transfer. New York: Wiley, 1988, pp. 379–421.
- G. E. Schneider and S. M. H. Karimian, “Advances in control volume based finite element methods for compressible flows,” Comput. Mech., vol. 14, no. 5, pp. 431–416, 1994. DOI: https://doi.org/10.1007/BF00377597.
- G. E. Schneider and M. J. Raw, “Control volume finite element method for heat transfer and fluid flow using collocated variables, 1. Computational procedure,” Numer. Heat Transfer, vol. 11, no. 4, pp. 363–390, 1987. DOI: https://doi.org/10.1080/10407788708913560.
- C. Prakash and S. V. Patankar, “A control-volume based finite-element method for solving the Navier–Stokes equations using equal-order velocity–pressure interpolation,” Numer. Heat Transfer, vol. 9, no. 3, pp. 253–276, 1986. DOI: https://doi.org/10.1080/10407788608913477.
- B. Yu, W. Q. Tao, J. J. Wei, Y. Kawaguchi, T. Tagawa, and H. Ozoe, “Discussion on momentum interpolation method for collocated grids of incompressible flow,” Numer. Heat Transfer, Part B, vol. 42, no. 2, pp. 141–166, 2002. DOI: https://doi.org/10.1080/10407790190053879.
- G. E. Schneider and M. J. Raw, “Control volume finite element method for heat transfer and fluid flow using Co-located variables, 2. Application and validation,” Numer. Heat Transfer, vol. 11, no. 4, pp. 391–400, 1987. DOI: https://doi.org/10.1080/10407788708913561.
- U. Ghia, K. N. Ghia, and C. T. Shin, “High-Re solutions for incompressible flow using the Navier–Stokes equations and a multigrid method,” J. Comput. Phys., vol. 48, no. 3, pp. 387–411, 1982. DOI: https://doi.org/10.1016/0021-9991(82)90058-4.
- T. A. AbdelMigid, K. M. Saqr, M. A. Kotb, and A. A. Aboelfarag, “Revisiting the lid-driven cavity flow problem: Review and new steady state benchmarking results using GPU accelerated code,” Alexandria Eng. J., vol. 56, no. 1, pp. 123–135, 2017. DOI: https://doi.org/10.1016/j.aej.2016.09.013.
- E. M. J. Komen, E. M. A. Frederix, T. H. J. Coppen, V. D’Alessandro, and J. G. M. Kuerten, “Analysis of the numerical dissipation rate of different Runge–Kutta and velocity interpolation methods in an unstructured collocated finite volume method in OpenFOAM,” Comput. Phys. Commun., vol. 253, pp. 107145–107145, 2020. DOI: https://doi.org/10.1016/j.cpc.2020.107145.