References
- P. Kandachar and R. Brouwer, “Applications of bio-composites in industrial products,” Mater. Res. Soc. Symp. Proc., vol. 702, pp. 101–112, 2002.
- A. K. Bledzki and J. Gassan, “Composites reinforced with cellulose based fibres,” Prog. Polym. Sci., vol. 24, no. 2, pp. 221–274, 1999. DOI: https://doi.org/10.1016/S0079-6700(98)00018-5.
- L. Y. Mwaikambo and M. P. Ansell, “Chemical modification of hemp, sisal, jute and kapok fibers by alkalisation,” J. Appl. Polym. Sci., vol. 84, no. 12, pp. 2222–2234, 2002. DOI: https://doi.org/10.1002/app.10460.
- J. Gassan, “A study of fibre and interface parameters affecting the fatigue behavior of natural fibre composites,” Compos. A, vol. 33, no. 3, pp. 369–374, 2002. DOI: https://doi.org/10.1016/S1359-835X(01)00116-6.
- D. Ruys, A. Crosky, and W. J. Evans, “Natural bast fibre structure,” IJMPT, vol. 17, no. 1/2, pp. 2–10, 2002. DOI: https://doi.org/10.1504/IJMPT.2002.001294.
- S. Mishra, S. S. Tripathy, M. Misra, A. K. Mohanty, and S. K. Nayak, “Novel eco-friendly Biocomposites: Biofiber reinforced biodegradable polyester amide composites – fabrication and properties evaluation,” J. Reinf. Plast. Compos., vol. 21, no. 1, pp. 55–70, 2002. DOI: https://doi.org/10.1177/0731684402021001282.
- A. O'Donnell, M. A. Dweib, and R. P. Wool, “Natural fiber composites with plant oil-based resin,” Compos. Sci. Technol., vol. 64, no. 9, pp. 1135–1145, 2004. DOI: https://doi.org/10.1016/j.compscitech.2003.09.024.
- A. K. Mohanty, M. Misra, and L. T. Drzal, “Surface modifications of natural fibers and performance of the resulting biocomposites: An overview,” Compos. Interfaces, vol. 8, no. 5, pp. 313–343, 2001. DOI: https://doi.org/10.1163/156855401753255422.
- A. K. Mohanty, L. T. Drzal, and M. Misra, “Engineered natural fiber reinforced polypropylene composites: Influence of surface modifications and novel powder impregnation processing,” J. Adhesion Sci. Technol., vol. 16, no. 8, pp. 999–1015, 2002. DOI: https://doi.org/10.1163/156856102760146129.
- J. Gassan and K. A. Bledzki, “Possibilities for improving the mechanical properties of jute/epoxy composites by alkali treatment of fibres,” Compos. Sci. Technol., vol. 59, no. 9, pp. 1303–1309, 1999. DOI: https://doi.org/10.1016/S0266-3538(98)00169-9.
- V. Prasad, G. Venkatachalam, A. Rathi, and S. Rajakumar, “Finite element analysis of jute fibre made hybrid polymer matrix composite,” AMM, vol. 592-594, pp. 363–367, 2014. DOI: https://doi.org/10.4028/www.scientific.net/AMM.592-594.363.
- V. Prasad, A. Joy, G. Venkatachalam, S. Narayanan, and S. Rajakumar, “Finite Element analysis of jute and banana fibre reinforced hybrid polymer matrix composite and optimization of design parameters using ANOVA technique,” Proc. Eng., vol. 97, pp. 1116–1125, 2014. DOI: https://doi.org/10.1016/j.proeng.2014.12.390.
- G. Venkatachalam, A. Gupta, and A. G. Shankar, “Flexural Analysis of Coir Fiber-Reinforced Hybrid Polymer Matrix Composites, Composites: Mechanics, Computations, Applications,” Comput. Mech. Comput. Appl. Int. J., vol. 6, no. 2, pp. 105–112, 2015. DOI: https://doi.org/10.1615/CompMechComputApplIntJ.v6.i2.20.
- T. Behzad and M. Sain, “Finite element modeling of polymer curing in natural fiber reinforced composites,” Compos. Sci. Technol., vol. 67, no. 7-8, pp. 1666–1673, 2007. DOI: https://doi.org/10.1016/j.compscitech.2006.06.021.
- J. Revanthkumar, S. Viswanath, and G. Venkatachalam, “Investigation on tensile behaviour of gongura fibre made hybrid polymer matrix composite,” Int. J. Nano Biomater., vol. 5, no. 4, pp. 218–227, 2014.
- G. Rama Kishore Babu, J. Revanthkumar, P. Anandh, G. Venkatachalam, and P. P. Graceraj, “Investigations on wear and frictional characteristic of hybrid polymer,” AMM, vol. 766-767, pp. 34–37, 2015. DOI: https://doi.org/10.4028/www.scientific.net/AMM.766-767.34.
- J. Revanthkumar, R. K. G. Babu, M. T. Thirupathi Reddy, G. Venkatachalam, and A. K. Jeevanantham, “Investigations on machinability and machining characteristics of hybrid polymer,” AMM, vol. 592-594, pp. 461–466, 2014. DOI: https://doi.org/10.4028/www.scientific.net/AMM.592-594.461.
- C. C. Ihueze, C. E. Okafor, and C. I. Okoye, “Natural fiber composite design and characterization for limit stress prediction in multiaxial stress state,” J. King Saud Univ. Eng. Sci., vol. 27, no. 2, pp. 193–206, 2015. DOI: https://doi.org/10.1016/j.jksues.2013.08.002.
- G. Venkatachalam, A. G. Shankar, D. Raghav, R. Santhosh Kiran, B. Mahesh, and K. Kumar, “Flexural analysis of palm fiber reinforced hybrid polymer matrix composite,” IOP Conf. Series: Mater. Sci. Eng., vol. 87, pp. 012036, 2015.
- M. L. Gossard, P. Seide, and W. M. Roberts, “Thermal buckling of plates,” National Advisory Committee for Aeronautics, Technical Note 2771, California, 1952.
- Y. Fu, J. Wang, and S. Hu, “Analytical solutions of thermal buckling and post buckling of symmetric laminated composite beams with various boundary conditions,” Acta Mech., vol. 225, no. 1, pp. 13–29, 2014. DOI: https://doi.org/10.1007/s00707-013-0941-z.
- C. Lien-Wen and L.-Y. Chen, “Thermal buckling of laminated composite plates,” J. Thermal Stresses, vol. 345-356, 2007.
- M. R. Prabhu and R. Dhanaraj, “Thermal buckling of laminated composite plates,” Comput. Struct., vol. 53, no. 5, pp. 1193–1204, 1994. DOI: https://doi.org/10.1016/0045-7949(94)90166-X.
- K. R. Thangaratnam, Palaninathan and J. Ramachandran, “Thermal buckling of composite laminated plates,” Comput. Struct., vol. 32, no. 5, pp. 1117–1124, 1989. DOI: https://doi.org/10.1016/0045-7949(89)90413-6.
- T. Jin, N. S. Ha, V. T. Le, N. S. Goo and H. C. Jeon, “Thermal buckling measurement of a laminated composite plate under a uniform temperature distribution using the digital image correlation method,” Compos. Struct., vol. 123, pp. 420–429, 2015. DOI: https://doi.org/10.1016/j.compstruct.2014.12.025.
- A. Al-Rajhiy, E. Qasim, and H. Tahssein, “Thermal buckling for nano-composite plate,” Adv. Nat. Appl. Sci., vol. 10, no. 11, pp. 42–48, 2016.
- A. V. Duran, N. A. Fasanella, V. Sundararaghavan, and A. M. Waas, “Thermal buckling of composite plates with spatial varying fiber orientations,” Compos. Struct., vol. 124, pp. 228–235, 2015. DOI: https://doi.org/10.1016/j.compstruct.2014.12.065.
- P. Emmanuel Nicholas, C. Dharmaraja, A. Sathya Sofia, and D. Vasudevan, “Optimization of laminated composite plates subjected to nonuniform thermal loads,” Polym. Polym. Compos., vol. 27, no. 6, pp. 314–319, 2019. DOI: https://doi.org/10.1177/0967391119846242.
- V. Suthenthiraveerappa and V. Gopalan, “Elastic constants of tapered laminated woven jute/epoxy and woven aloe/epoxy composites under the influence of porosity,” J. Reinforced Plast. Compos., vol. 36, no. 19, pp. 1453–1469, 2017. DOI: https://doi.org/10.1177/0731684417710108.
- T. Muni Kenche Gowda, A. C. B. Naidua, and R. Chhaya, “Some mechanical properties of untreated jute fabric-reinforced polyester composites,” Compos. A, vol. 30, no. 3, pp. 277–284, 1999. DOI: https://doi.org/10.1016/S1359-835X(98)00157-2.
- A. Soundhar, M. Rajesh, K. Jayakrishna, M. T. H. Sultan, and A. U. M. Shah, “Investigation on mechanical properties of polyurethane hybrid nano composite foams reinforced with roselle fibers and silica nanoparticles,” Nanocomposites, vol. 5, no. 1, pp. 1–12, 2019.
- N. Aslan and Y. Cebeci, “Application of Box–Behnken design and response surface methodology for modeling of some Turkish coals,” Fuel, vol. 86, no. 1–2, pp. 90–97, 2007. DOI: https://doi.org/10.1016/j.fuel.2006.06.010.
- J. Prakash Maran, S. Manikandan, K. Thirugnanasambandham, C. Vigna Nivetha, and R. Dinesh, “Box-Behnken design based statistical modeling for ultrasound-assisted extraction of corn silk polysaccharide,” Carbohydr. Polym., vol. 92, no. 1, pp. 604–611, 2013. DOI: https://doi.org/10.1016/j.carbpol.2012.09.020.
- B.-Y. Tak, B.-S. Tak, Y.-J. Kim, Y.-J. Park, Y.-H. Yoon, and G.-H. Min, “ “Optimization of color and COD removal from livestock wastewater by electrocoagulation process: Application of Box–Behnken design (BBD),” J. Ind. Eng. Chem., vol. 28, pp. 307–315, 2015. DOI: https://doi.org/10.1016/j.jiec.2015.03.008.
- V. Gopalan et al., “Dynamic characteristics of woven flax/epoxy laminated composite plate,” Polymers, vol. 13, no. 2, pp. 209, 2021. DOI: https://doi.org/10.3390/polym13020209.
- ASTM D3039/D3039M-17, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. West Conshohocken, PA: ASTM International, 2017. www.astm.org.
- ASTM D5279-13, Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion. West Conshohocken, PA: ASTM International, 2013. www.astm.org.
- ASTM E228-17, Standard Test Method for Linear Thermal Expansion of Solid Materials with a Push-Rod Dilatometer. West Conshohocken, PA: ASTM International, 2017. www.astm.org.
- A. Guru, G. Venkatachalam, and R. Vasudevan, “Investigation on thermal buckling analysis of jute/epoxy polymer matrix composites,” Emerg. Mater. Res., vol. 9, no. 4, pp. 1229–1236, 2020. DOI: https://doi.org/10.1680/jemmr.19.00169.