571
Views
45
CrossRef citations to date
0
Altmetric
Articles

Performance and emission characteristics of diesel fuel produced from waste plastic oil obtained by catalytic pyrolysis of waste polypropylene

, &

References

  • Bottrill, R. P., Cunliffe, A. M., and Williams, P. T. 1998. Combustion of tyre pyrolysis oil. Process Saf. Environ. Prot. 76:291–301.
  • Hayashi, J., Nakahara, T., Kusakabe, K., and Morooka, S. 1998. Pyrolysis of polypropylene in the presence of oxygen. Fuel Process. Technol. 55:265–275.
  • Kidoguchi, Y., Yang, C., Kato, R., and Miwa, K. 2000. Effects of fuel cetane number and aromatics on combustion process and emissions of a direct injection diesel engine. JSAE Rev. 21:469–475.
  • Kim, D., Shin, S., Sohn, S., Choi, J., and Ban, B. 2002. Waste plastics as supplemental fuel in the blast furnace process: Improving combustion efficiencies. J. Hazard. Mater. 94:213–222.
  • Mani, M., and Nagarajan, G. 2009. Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on waste plastic oil. Energy 34:1617–1623.
  • Mani, M., Nagarajan, G., and Sampath, S. 2010. An experimental investigation on a DI diesel engine using waste plastic oil with exhaust gas recirculation. Fuel 89:1826–1832.
  • Mani, M., Nagarajan, G., and Sampath, S. 2011. Characterization and effect of using waste plastic oil and diesel fuel blends in compression ignition engine. Energy 36:212–219.
  • Mani, M., Subash, C., and Nagarajan, G. 2009. Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil. Appl. Therm. Eng. 29:2738–2744.
  • Murugan, S., Ramaswamy, M. C., and Nagarajan, G. 2008a. The use of tyre pyrolysis oil in diesel engines. Waste Manage. 28:2743–2749.
  • Murugan, S., Ramaswamy, M. C., and Nagarajan, G. 2008b. Influence of distillation on performance, emission, and combustion of a diesel engine, using tyre pyrolysis oil diesel blends. J. Therm. Sci. 12:157–167.
  • Murugan, S., Ramaswamy, M. C., and Nagarajan, G. 2008c. Performance, emission and combustion studies of a DI diesel engine using distilled tyre pyrolysis oil-diesel blends. Fuel Process. Technol. 89:152–159.
  • Nagarajan, G., Rao, A. N., and Renganarayanan, S. 2002. Emission and performance characteristics of neat ethanol fuelled DI diesel engine. Int. J. Ambient Energy 23:149–158.
  • Panda, A. K., and Singh, R. K. 2011. Catalytic performances of kaolin and silica alumina in the thermal degradation of polypropylene. J. Fuel Chem. Technol. 39:198–202.
  • Ren, Y., Huang, Z., Jiang, D., Liu, L., Zeng, K., Liu, B., and Bin, X. 2006. Combustion characteristics of a compression-ignition engine fuelled with diesel–dimethoxy methane blends under various fuel injection advance angles. Appl. Therm. Eng. 26:327–337.
  • Sayin, C., Uslu, K., and Canakci, M. 2008. Influence of injection timing on the exhaust emissions of a dual-fuel CI engine. Renewable Energy 33:1314–1323.
  • Zabaniotou, A. A., and Stavropoulos, G. G. 2003. Pyrolysis of used automobile tires and residual char utilization. J. Anal. Appl. Pyrolysis 70:711–722.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.