References
- Abass, E., and Fahmi, A. 2013. Experimental investigation of low salinity hot water injection to enhance the recovery of heavy oil reservoirs. Soc. Pet. Eng. DOI: 10.2118/164768-MS.
- Bousaid, I. S. 1991. Hot-water and steamflood studies using Kern River oil. Soc. Pet. Eng. DOI: 10.2118/21543-MS.
- Brice, B. W., and Renouf, G. 2008. Increasing oil recovery from heavy oil waterfloods. Soc. Pet. Eng. DOI: 10.2118/117327-MS.
- Cassinat, J. C., Payette, M. C., Taylor, D. B., and Cimolai, M. P. 2002. Optimizing waterflood performance by utilizing hot water injection in a high paraffin content reservoir. Soc. Pet. Eng. DOI: 10.2118/75141-MS.
- Dietrich, J. K. 2010. The displacement of heavy oil from diatomite using hot water and steam. Soc. Pet. Eng. DOI: 10.2118/129705-MS.
- Dornan, R. G. 1990. Hot waterflood in a post-steamflood reservoir: A case history in the Kern River field, California. Soc. Pet. Eng. DOI: 10.2118/20050-MS.
- Nukhaev, M., Muslimov, E., Brown, G., Tyutikov, S., Rodionov, A., Lachugin, D., and Makarov, E. 2012. Injectivity profile monitoring and hot water flooding optimization for horizontal well 2G on Rospan’s Russkoe heavy oil field using DTS (Russian). Soc. Pet. Eng. DOI: 10.2118/159592-RU.
- Pasarai, U., and Arihara, N. 2005. Application of streamline method to hot water-flooding simulation for heavy oil recovery. Soc. Pet. Eng. DOI: 10.2118/93149-MS.
- Spillette, A. G., and Nielsen, R. L. 1968. Two-dimensional method for predicting hot waterflood recovery behavior. Soc. Pet. Eng. DOI: 10.2118/1895-PA.
- West, C. C., and Vittoratos, E. S. 2013. VRR < 1 is optimal for heavy oil waterfloods. Soc. Pet. Eng. DOI: 10.2118/166609-MS.
- Yadali Jamaloei, B., Singh, A., and Solberg, A. 2014. Opportunities and challenges of cyclic steam stimulation (CSS) development in Seal’s Cadotte area. Soc. Pet. Eng. DOI: 10.2118/170095-MS.
- Zhao, D. W., and Gates, I. D. 2013. Stochastic optimization of hot water flooding strategy in thin heavy oil reservoirs. Soc. Pet. Eng. DOI: 10.2118/165541-MS.