Wellbore temperature and pressure calculation model for coiled tubing drilling with supercritical carbon dioxide

References

• Gupta., A. P., A. Gupta, and J. Langlinais. 2005. Feasibility of supercritical carbon dioxide as a drilling fluid for deep underbalanced drilling operation. SPE Annual Technical Conference and Exhibition, 96992.
   Google Scholar
• Hasan, A. R., and C. S. Kabir. 1991. Heat transfer during two-phase flow in wellbores: PartI-formation temperature, 22866. Dallas, Texas: SPE Paper.
   Google Scholar
• Hasan, A. R., and C. S. Kabir. 1994. Aspects of wellbore heat transfer during two-phase flow. SPE Production & Facilities 9:211–16. doi:10.2118/22948-PA.
   Google Scholar
• Kolle, J. J. 2000. Coiled–Tubing drilling with supercritical carbon dioxide. In SPE/PS-CIM International Conference on Horizontal Well Technology, 65534.
   Google Scholar
• Li, G., M. Yang, Y. Meng, Z. Wen, Y. Wang, and Z. Yuan. 2016. Transient heat transfer models of wellbore and formation systems during the drilling process under well kick conditions in the bottom-hole. Applied Thermal Engineering 93:339–47. doi:10.1016/j.applthermaleng.2015.09.110.
   Web of Science ®Google Scholar
• Liang, Y., D. Guoliang, H. Dongping, et al. 2003. Review of flow and heat transfer of supercritical carbon dioxide. Journal of Refrigeration 2:51–56.
   Google Scholar
• Liu, S., Y. Huang, G. Liu, J. Wang, and L. K. H. Leung. 2017. Improvement of buoyancy and acceleration parameters for forced and mixed convective heat transfer to supercritical fluids flowing in vertical tubes. International Journal of Heat and Mass Transfer 106:1144–56. doi:10.1016/j.ijheatmasstransfer.2016.10.093.
   Web of Science ®Google Scholar
• Ni, H., W. Song, R. Wang, and Z. Shen. 2016. Coupling model for carbon dioxide wellbore flow and heat transfer in coiled tubing drilling. Journal of Natural Gas Science and Engineering 30:414–20. doi:10.1016/j.jngse.201602.050.
   Web of Science ®Google Scholar
• Raymond, L. R. 1969. Temperature distribution in a circulating drilling fluid. Journal of Petroleum Technology 21:333–41. doi:10.2118/2320-PA.
   Google Scholar
• Shen, Z., W. Haizhu, and L. Gensheng. 2010. Influence of sonic flow on temperature and pressure of bit. Journal of China University of Petroleum 34 (4):67–74.
   Google Scholar
• Song, W., H. Ni, R. Wang, Z. Shen, and M. Zhao. 2016. Pressure controlling method for managed pressure drilling with supercritical carbon dioxide as the circulation fluid. Petroleum Exploration and Development 46 (5):857–62. doi:10.1016/S1876-3804(16)30102-1.
   Google Scholar
• Song, W., H. Ni, R. Wang, B. Sun, and Z. Shen. 2017a. Pressure transmission in the tubing of supercritical carbon dioxide fracturing. Journal of CO2 Utilization 21:467–72. doi:10.1016/j.jcou.2017.08.012.
   Web of Science ®Google Scholar
• Song, W., H. Ni, R. Wang, and M. Zhao. 2017b. Wellbore flow field of coiled tubing drilling with supercritical carbon dioxide. Greenhouse Gases: Science and Technology 7:745–55. doi:10.1002/ghg.1685.
   Web of Science ®Google Scholar
• Span, R., and W. Wagner. 1996. A new equation of state for carbon dioxide covering the fluid region from the triple-point temperature to 1100 K at pressures up to 800 MPa. Journal of Physical and Chemical Reference Data 25:1509–96. doi:10.1063/1.555991.
   Web of Science ®Google Scholar
• Vesovic, V., W. A. Wakeham, G. A. Olchowy, J. V. Sengers, J. T. R. Watson, and J. Millat. 1990. The transport properties of carbon dioxide. Journal of Physical and Chemical Reference Data 19 (3):763–808. doi:10.1063/1.555875.
   Web of Science ®Google Scholar
• Wang, H., Z. Shen, and G. Li. 2012. A wellbore flow model of coiled tubing drilling with supercritical carbon dioxide. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 34 (14):1347–1362. doi:10.1080/15567036.2010.520065.
   Web of Science ®Google Scholar
• Wang, H., S. Zhong Hou, and L. Gensheng. 2011a. Wellbore temperature and pressure coupling calculation of drilling with supercritical carbon dioxide. Petroleum Exploration and Development 38 (1):97–102. doi:10.1016/S1876-3804(11)60039-6.
   Google Scholar
• Wang H., S. Zhonghou, and L. Gensheng. 2011b. Influences of formation water invasion on the well bore temperature and pressure in supercritical CO2 drilling. Petroleum Exploration and Development 38 (3):362–68. doi:10.1016/S1876-3804(11)60039-6.
   Google Scholar
• Wang, R.-H., H.-J. Huo, Z.-Y. Huang, H.-F. Song, and H.-J. Ni. 2014. Experimental and numerical simulations of bottom hole temperature and pressure distributions of supercritical CO2 jet for well-drilling. Journal of Hydrodynamics, Ser. B 26 (2):226–33. doi:10.1016/S1001-6058(14)60025-1.
   Web of Science ®Google Scholar
• Yi, L.-P., X.-G. Li, -Z.-Z. Yang, and J. Sun. 2018. Coupled calculation model for transient temperature and pressure of carbon dioxide injection well. International Journal of Heat and Mass Transfer 121:680–90. doi:10.1016/j.ijheatmasstransfer.2018.01.036.
   Web of Science ®Google Scholar
• Zhou, Z., Y. Lu, J. Tang, X. Zhang, and Q. Li. 2017. Numerical simulation of supercritical carbon dioxide jet at well bottom. Applied Thermal Engineering 121::210–217. doi:10.1016/j.applthermaleng.2017.04.060.
   Web of Science ®Google Scholar