Salt contamination and temperature impacts on the rheological and electrical resistivity behaviors of water based drilling mud

References

• Adebisi, N. O., S. O. Ariyo, and P. B. Sotikare. 2016. Electrical resistivity and geotechnical assessment of subgrade soils in southwestern oart of Nigeria. Journal of African Earth Sciences 119:256–63. doi:10.1016/j.jafrearsci.2016.03.019.
   Web of Science ®Google Scholar
• Ali, K., C. Vipulanandan, and D. Richardson 2013. Salt (NaCl) contamination on the resistivity and plastic viscosity of a bentonite drilling mud. Proceeding of CIGMAT Conference and Exhibition, Houston, TX, USA.
   Google Scholar
• Al-Muntasheri, G. A., H. A. Nasr-El-Din, and I. A. Hussein. 2007. A rheological investigation of a high temperature organic gel used for water shut-off treatments. Journal of Petroleum Science and Engineering 59:73–83. doi:10.1016/j.petrol.2007.02.010.
   Web of Science ®Google Scholar
• Barker, J. W., K. W. Feland, and Y. H. Tsao. 1994. Drilling long salt sections along the U.S. gulf coast. SPEDC 185. doi:10.2118/24605-PA.
   Google Scholar
• Barker, J. W., K. W. Feland, and Y.-H. Tsao 1992. Drilling long salt sections along the U.S. gulf coast. Paper SPE 24605 presented at the SPE Annual Technical Conference and Exhibition, Washington, DC, October 4–7.
   Google Scholar
• Basirat, B., C. Vipulanandan, and D. Richardson 2013. Effect of salt contamination on the filtration loss in 4% bentonite drilling mud with xanthan gum. Proceeding of THC-2013 Conference and Exhibition, Houston, TX, USA.
   Google Scholar
• Beihoffer, T. W., D. S. Dorrough, and D. D. Schmidt 1988. The separation of electrolyte from rheological effects in studies of inhibition of shales with native moisture contents. SPE Paper 18032. IADC/SPE Drilling Conference, Houston, TX. (2–5 October). doi: 10.2118/18032-MS.
   Google Scholar
• Ebadati, A., A. Davarpanah, and B. Mirshekari. 2018. Stimulated-based characterization recovery enhancement feedback of oil-rim reservoirs. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. doi:10.1080/15567036.2018.1503759.
   Web of Science ®Google Scholar
• Fuhua, W., T. Xuechao, W. Ruihe, S. Mingbo, W. Li, and L. Liu Jianghua. 2012. High temperature and high pressure rheological properties of high-density water-based drilling fluids for deep wells. Petroleum Science Journal 9:354–62. doi:10.1007/s12182-012-0219-4.
   Web of Science ®Google Scholar
• Hamada, G. M. 2008. Identification of hydrocarbon movability and type from resistivity logs. Petroleum Science and Technology 26 (6):638–48. doi:10.1080/10916460701204883.
   Web of Science ®Google Scholar
• Hassiba, K. J., and M. Amani. 2013. The effect of salinity on the rheological properties of water based mud under high pressures and high temperatures for drilling offshore and deep wells. Earth Science Research 2 (1):175–86.
   Google Scholar
• Khodja, M., J. P. Canselier, F. Bergaya, K. Fourar, M. Khodja, N. Cohaut, and A. Benmounah. 2010. Shale problems and water-based drilling fluid optimisation in the Hassi Messaoud Algerian oil field. Applied Clay Science 49:383–93. doi:10.1016/j.clay.2010.06.008.
   Web of Science ®Google Scholar
• Mohammadreza, M. S., R. Ahmad, N. Iman, and D. S. Mohammad. 2012. Effect of ultrasonic irradiation on rheological properties of asphaltenic crude oils. Petroleum Science Journal 9:82–88. doi:10.1007/s12182-012-0186-9.
   Web of Science ®Google Scholar
• Molaei, N., H. Razavi, and S. C. Chelgani. 2018. Experimental modeling for upgrading of brown barite ore by different processing methods. Modeling Earth Systems and Environment. doi:10.1007/s40808-018-0429-x.
   Web of Science ®Google Scholar
• Muecke, N. B., and N. A. Kiji 1993. Heated mud systems: The solution to squeezing salt problems. Paper SPE 25762 Presented at the SPEJ IADC Drilling Conference, Amsterdam, February 22–25.
   Google Scholar
• Mustafa, V. K. 2010. Statistical approach of two-three parameters rheological models for polymer type drilling fluid analysis. Energy Sources, Part A 32:336–45.
   Google Scholar
• Mustafa, V. K., and A. K. Tolga. 2004. Determination of rheological models for drilling fluids (a statistical approach). Energy Sources 26 (2):153–65. doi:10.1080/00908310490258533.
   Google Scholar
• Mustafa, V. K., and A. K. Tolga. 2005. Effect of polymers on the rheological properties of KCl/polymer type drilling fluids. Energy Sources 27 (5):405–15. doi:10.1080/00908310490441809.
   Google Scholar
• Njobuenwu, O. D., and C. A. Wobo. 2007. Effect of drilled solids on drilling rate and performance. Journal of Petroleum Science and Engineering 55:271–76. doi:10.1016/j.petrol.2006.08.012.
   Web of Science ®Google Scholar
• Sherwood, J. D. 1994. Thixotropic mud, compacted cake and swelling shale. Les Comptes Rend. 29 Coll Ann. Groupe Franc. Rheol., La Thixotropie. .
   Google Scholar
• Stjern, G., A. Agle, and P. Horsrud. 2003. Local rock mechanical knowledge improves drilling performance in fractured formations at the Heidrun field. Journal of Petroleum Science and Engineering 38:83–96. doi:10.1016/S0920-4105(03)00023-8.
   Web of Science ®Google Scholar
• Tamsilian, Y., A. S. A. Ramazani, and N. Khosravi. 2012. The preparation and rheological investigation of polymer and hydrogel modified drilling mud. Petroleum Science and Technology 30 (10):1059–68. doi:10.1080/10916466.2010.489090.
   Web of Science ®Google Scholar
• Tang, H. S., and D. M. Kalyon. 2004. Estimation of the parameters of Herschel–Bulkley fluid under wall slip using a combination of capillary and squeeze flow viscometers. Rheologica Acta 43 (1):80–88. doi:10.1007/s00397-003-0322-y.
   Web of Science ®Google Scholar
• Usluogullari, O., and C. Vipulanandan. 2011. Stress-strain behavior and california bearing ratio of artificially cemented sand. Journal of Testing and Evaluation 39 (4):1–9.
   Web of Science ®Google Scholar
• Vipulanandan, C., and P. Prashanth. 2013. Impedance spectroscopy characterization of a piezoresistive structural polymer composite bulk sensor. Journal of Testing and Evaluation 41 (6):898–904. doi:10.1520/JTE20120249.
   Web of Science ®Google Scholar
• Vipulanandan, C., and A. M. Raheem 2015. Characterizing ultra-soft soils and anchor-soil interaction for deepwater applications. Proceedings of the Twenty-fifth International Ocean and Polar Engineering Conference, Kona, Big Island, Hawaii, USA, June 21–26: 1048–54.
   Google Scholar
• Vipulanandan, C., A. M. Raheem, B. Basirat, and A. S. Mohammed 2014. New kinetic model to characterize the filter cake formation and fluid loss in HPHT. Proceedings of the Offshore Technology Conference,OTC-25100-MS, Houston, Texas, USA, May 5–8: 1–17.
   Google Scholar
• Yi, L. P., X. G. Li, Z. Z. Yang, and Y. Li. 2018. Wellbore temperature and pressure calculation model for coiled tubing drilling with supercritical carbon dioxide. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. doi:10.1080/15567036.2018.1522394.
   Web of Science ®Google Scholar
• Zghibi, A., J. Tarhouni, and L. Zouhri. 2013. Assessment of seawater intrusion and nitrate contamination on the groundwater quality in the Korba coastal plain of Cap-Bon (North-east of Tunisia). African Earth Sciences 87:1–12. doi:10.1016/j.jafrearsci.2013.07.009.
   Google Scholar
• Zhaoxia, D., L. Yahua, L. Meiqin, and L. Mingyuan. 2009. Rheological properties of polymer micro-gel dispersions. Petroleum Science Journal 6:294–98. doi:10.1007/s12182-009-0047-3.
   Web of Science ®Google Scholar