References
- Al-Waeli, A. H. A., K. Sopian, H. A. Kazem, and M. T. Chaichan. September, 2017. Photovoltaic/Thermal (PV/T) systems: Status and future prospects. Renewable and Sustainable Energy Reviews 77:109–30. doi:10.1016/j.rser.2017.03.126.
- Atkin, P., and M. M. Farid. April, 2015. Improving the efficiency of photovoltaic cells using PCM infused graphite and aluminium fins. Solar Energy 114:217–28. doi:10.1016/j.solener.2015.01.037.
- Cox, C. H., III, and P. Raghuraman. 1985. Design considerations for flat-plate-photovoltaic/thermal collectors. Solar Energy 35 (3):227–41. doi:10.1016/0038-092X(85)90102-1.
- Daghigh, R., M. H. Ruslan, and K. Sopian. October, 2011. Advances in liquid based photovoltaic/thermal (PV/T) collectors. Renewable and Sustainable Energy Reviews 15(8):4156–70. doi:10.1016/j.rser.2011.07.028.
- El Mays, A., R. Ammar, M. Hawa, M. A. Akroush, F. Hachem, M. Khaled, and M. Ramadan. July, 2017. Improving photovoltaic panel using finned plate of aluminum. Energy Procedia 119:812–17. doi:10.1016/j.egypro.2017.07.103.
- Fabbri, G., and M. Greppi. 2017. An optimized heat sink for thermophotovoltaic panels. Journal of Applied Research on Industrial Engineering 5(1):1–9. (2018). doi:10.1007/978-3-319-89845-2_44.
- Godwin Antony, A., S. Dinesh, K. Rajaguru, V. Vijayan, and S. Aravind. 2017. Analysis and optimization of performance parameters in computerized I.C. engine using diesel blended with linseed oil and Leishmaan’s solution. Mechanics and Mechanical Engineering 21(20):193–205.
- Kerzmann, T., and L. Schaefer. May, 2012. System simulation of a linear concentrating photovoltaic system with an active cooling system. Renewable Energy 41:254–61. doi:10.1016/j.renene.2011.11.004.
- Malvi, C. S., D. W. Dixon-Hardy, and R. Crook. July, 2011. Energy balance model of combined photovoltaic solar-thermal system incorporating phase change material. Solar Energy 85(7):1440–46. doi:10.1016/j.solener.2011.03.027.
- Moshfegh, H., M. Eslami, and A. Hosseini. July 31, 2018. Thermoelectric cooling of a Photovoltaic panel. The Role of Exergy in Energy and the Environment Green Energy and Technology. Springer, Cham, 625–34. doi:10.1007/978-3-319-89845-2_44.
- Popovici, C. G., S. V. Hudişteanu, T. D. Mateescu, and N.-C. Cherecheş. 2016. Efficiency Improvement of photovoltaic panels by using air cooled heat sinks. Energy Procedia 85:425–32. 10.1016/j.egypro.2015.12.223.
- Radwan, A., and M. Ahmed. November 15, 2017. The influence of microchannel heat sink configurations on the performance of low concentrator photovoltaic systems. Applied Energy 206:594–611. doi:10.1016/j.apenergy.2017.08.202.
- Srikanth, R., and C. Balaji. January, 2016. Experimental investigation on the heat transfer performance of a PCM based pin fin heat sink with discrete heating. International Journal of Thermal Sciences 111:188–203. doi:10.1016/j.ijthermalsci.2016.08.018.
- Srinivasan, R., V. Vijayan, and K. Sridhar. 2017. Computational fluid dynamic analysis of missile with grid fins. Journal of Applied Fluid Mechanics 10 (Special Issue):33–39.
- Stropnik, R., and U. Stritih. November, 2016. Increasing the efficiency of PV panel with the use of PCM. Renewable Energy 97:671–79. doi:10.1016/j.renene.2016.06.011.
- Tan, W.-C., K.-K. Chong, and M.-H. Tan. May 1, 2017. Performance study of water-cooled multiple-channel heat sinks in the application of ultra-high concentrator photovoltaic system. Solar Energy 147:314–27. doi:10.1016/j.solener.2017.03.040.