Measurement and analysis of penetration rate and vibration on a roof bolter for identification rock interface of roadway roof

References

• Aalizad, S., and F. Rashidinejad. 2012. Prediction of penetration rate of rotary-percussive drilling using artificial neural networks – A case study. Archives of Mining Sciences 57 (3):715–28. doi:10.2478/v10267-012-0046-X.
   Web of Science ®Google Scholar
• Al-Sudani, J. A. 2017. Real-time monitoring of mechanical specific energy and bit wear using control engineering systems. Journal of Petroleum Science and Engineering 149:171–82. doi:10.1016/j.petrol.2016.10.038.
   Web of Science ®Google Scholar
• ASTM. 2002a. Standard test method for compressive strength of cylindrical concrete specimens. Annual Book of ASTM Standards C39/C39M.
   Google Scholar
• Chen, J., H. Deng, M. Gao, Y. Cheng, and C. Wang. 2016a. Study on the identification of the drilling of the roof rock in the roadway. Journal of Mining and Safety Engineering 33 (2):271–77. doi:10.13545/j.cnki.jmse.2016.02.013.
   Google Scholar
• Chen, X., D. Gao, B. Guo, and Y. Feng. 2016b. Real-time optimization of drilling parameters based on mechanical specific energy for rotating drilling with positive displacement motor in the hard formation. Journal of Natural Gas Science and Engineering 35:686–94. doi:10.1016/j.jngse.2016.09.019.
   Web of Science ®Google Scholar
• Finfinger, G., S. Peng, and Q. Gu. 2000. An approach to identifying geological properties from roof bolter drilling parameters. The National Institute for Occupational Safety and Health (NIOSH). https://stacks.cdc.gov/view/cdc/8573.
   Google Scholar
• Galdames, F. J., C. A. Perez, P. A. Estévez, and M. Adams. 2017. Classification of rock lithology by laser range 3d and color images. International Journal of Mineral Processing 160 (Complete):47–57. doi:10.1016/j.minpro.2017.01.008.
   Google Scholar
• Guo, S., and N. Ma. 2016. Strata fracturing state and vibration response characteristics of drill. Journal of Mining & Safety Engineering 33 (5):911–16.
   Google Scholar
• Howarth, D., W. Adamson, and J. Berndt. 1986. Correlation of model tunnel boring and drilling machine performances with rock properties. International Journal of Rock Mechanics& Mining Sciences & Geomechanics Abstracts 23 (2):171–75. doi:10.1016/0148-9062(86)90344-X.
   Web of Science ®Google Scholar
• Itakura, K., K. Sato, G. Deguchi, Y. Ichihara, and H. Matsumoto. 1997. Development of a roof-logging system by rockbolt drilling. Transactions Of The Institution Of Mining And Metallurgy, Section A-Mining Industry 106:A118–A123.
   Google Scholar
• Jia, M. 2007. Study on the deterioration mechanism of rock strata combination roof fall. Geotechnical Mechanics 28 (7):1343–47.
   Google Scholar
• Kahraman, S., C. Balcı, S. Yazıcı, and N. Bilgin. 2000. Prediction of the penetration rate of rotary blast hole drills using a new drillability index. International Journal of Rock Mechanics & Mining Sciences 37 (5):729–43. doi:10.1016/S1365-1609(00)00007-1.
   Web of Science ®Google Scholar
• Li, P., S. Jiang, D. Tang, and B. Xu. 2017. A PFC3D-based numerical simulation of cutting load for lunar rock simulant and experimental validation. Advances in Space Research 59 (10):2583–99. doi:10.1016/j.asr.2017.02.032.
   Web of Science ®Google Scholar
• Liu, S., M. Fu, H. Zhang, and J. Yue. 2016. Vibration mechanism and characteristics analysis of drill rod when drilling roof bolt hole. Journal of China University of Mining & Technology 45 (5):893–900.
   Google Scholar
• Liu, S., D. Liu, Y. Feng, X. Li, and P. Shang. 2014. Influence of stress states on drilling velocity of anchorage hole on coal roadway roof. Journal of China Coal Society 39 (4):608–13.
   Google Scholar
• Liu, S., Y. Luo, and H. Jia. 2018. Energy response characteristics of rock interface under drilling of roof anchorage borehole in coal roadway. Journal of China University of Mining and Technology 47 (1):88–96.
   Google Scholar
• Rostami, J., S. Bahrampour, A. Ray, and C. Collins. 2015. Measurement and analysis of noise and acoustic emission on a roof bolter for identification of joints and in rock. Journal of the Acoustical Society of America 137 (4):2378–2378. doi:10.1121/1.4920641.
   Google Scholar
• Teale, R. 1965. The concept of specific energy in rock drilling. International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts 2 (1):57–73. doi:10.1016/0148-9062(65)90022-7.
   Google Scholar
• Tian, J., J. Li, W. Cheng, Z. Zhu, L. Yang, Y. Yang, and T. Zhang. 2018. Working mechanism and rock-breaking characteristics of coring drill bit. Journal of Petroleum Science & Engineering 162:348–57. doi:10.1016/j.petrol.2017.12.047.
   Web of Science ®Google Scholar
• Wang, Q., Q. Qin, S. Gao, S. Li, and H. Gao. 2018. Relationship between rock drilling parameters and rock uniaxial compressive strength based on energy analysis. Journal of China Coal Society 43 (5):1289－1295.
   Google Scholar
• Yang, Y., H. Liao, Y. Xu, S. Yang, and J. Niu. 2018. Coupled fluid-structure simulation of a vibration-assisted rotary percussion drilling tool. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. doi:10.1080/15567036.2018.1549147.
   Web of Science ®Google Scholar
• Yaşar, E., P. G. Ranjith, and D. R. Viete. 2011. An experimental investigation into the drilling and physico-mechanical properties of a rock-like brittle material. Journal of Petroleum Science & Engineering 76 (3):185–93. doi:10.1016/j.petrol.2011.01.011.
   Web of Science ®Google Scholar