References
- Alexis, G. K. 2004. Estimation of ejector’s main cross sections in steam-ejector refrigeration system. Applied Thermal Engineering 24 (17):2657–63. doi:https://doi.org/10.1016/j.applthermaleng.2004.03.012.
- ANSYS FLUENT user’s guide. 2016. FLUENT Inc.
- Atmaca, M., I. Girgin, and C. Ezgi. 2016. CFD modeling of a diesel evaporator used in fuel cell systems. International Journal of Hydrogen Energy 41:6004–12. doi:https://doi.org/10.1016/j.ijhydene.2016.02.122.
- Bartosiewicz, Y., Z. Aidoun, P. Desevaux, and Y. Mercadier. 2005. Numerical and experimental investigations on supersonic ejectors. International Journal of Heat and Fluid Flow 26 (1):56–70. doi:https://doi.org/10.1016/j.ijheatfluidflow.2004.07.003.
- Besagni, G., and F. Inzoli. 2017. Computational fluid-dynamics modeling of supersonic ejectors: Screening of turbulence modeling approaches. Applied Thermal Engineering 117:122e44. doi:https://doi.org/10.1016/j.applthermaleng.2017.02.011.
- Besagni, G., R. Mereu, and F. Inzoli. 2016. Ejector refrigeration: A comprehensive review. Renewable and Sustainable Energy Reviews 53:373–407. doi:https://doi.org/10.1016/j.rser.2015.08.059.
- Besagni, G., R. Mereu, P. Chiesa, and F. Inzoli. 2015. An integrated lumped parameter-CFD approach for off-design ejector performance evaluation. Energy Conversion and Management 105:697e715. doi:https://doi.org/10.1016/j.enconman.2015.08.029.
- Croquer, S., S. Ponce, and Z. Aidoun. 2016a. Turbulence modeling of a single-phase R134a supersonic ejector. Part 1: Numerical benchmark. International Journal of Refrigeration 61:140–52. doi:https://doi.org/10.1016/j.ijrefrig.2015.07.030.
- Croquer, S., S. Ponce, and Z. Aidoun. 2016b. Turbulence modeling of a single-phase R134a supersonic ejector. Part 2: Numerical benchmark. International Journal of Refrigeration 61:153–65. doi:https://doi.org/10.1016/j.ijrefrig.2015.07.029.
- Croquer, S., S. Poncet, and Z. Aidoun. 2016. Turbulence modeling of a single-phase R134a supersonic ejector. Part 1: Numerical benchmark. International Journal of Refrigeration 61:140e52. doi:https://doi.org/10.1016/j.ijrefrig.2015.07.030.
- Ezgi, C., and I. Girgin. 2015. Design and thermodynamic analysis of a steam ejector refrigeration/heat pump system for naval surface ship applications. Entropy 17 (12):8152–73. doi:https://doi.org/10.3390/e17127869.
- Launder, B. E., and D. B. Spalding. 1974. The numerical computation of turbulent flows. Computer Methods in Applied Mechanics and Engineering 3 (2):269–89. doi:https://doi.org/10.1016/0045-7825(74)90029-2.
- Ma, X., W. Zhang, S. A. Omer, and S. B. Riffat. 2010. Experimental investigation of a novel steam ejector refrigerator suitable for solar energy applications. Applied Thermal Engineering 30:1320–25. doi:https://doi.org/10.1016/j.applthermaleng.2010.02.011.
- Mohamed, S., A. A. Masabai, Y. Shatilla, and T. Zhang. 2016. Design of high-performance refrigerant ejector for sub-ambient cooling. In: 2016 15th IEEE intersociety conference on thermal and thermomechanical phenomena in electronic systems (ITherm), Las Vegas, NV, USA. p. 1458e65. doi: https://doi.org/10.1109/ITHERM.2016.7517720.
- Mohamed, S., Y. Shatill, and T. Zhang. 2019. CFD-based design and simulation of hydrocarbon ejector for cooling. Energy 167:346e358. doi:https://doi.org/10.1016/j.energy.2018.10.057.
- Patankar, S. V. 1980. Numerical heat transfer and fluid flow. New York: McGraw-Hill.
- Pianthong, K., W. Sheehanam, M. Behnia, T. Sriveerakul, and S. Aphornratana. 2007. Investigation and improvement of ejector refrigeration system using compu-tational fluid dynamics technique. Energy Conversion and Management 48 (9):2556–64. doi:https://doi.org/10.1016/j.enconman.2007.03.021.
- Riffat, S. B., G. Gan, and S. Smith. 1996. Computational fluid dynamics applied to ejector heat pumps. Applied Thermal Engineering 16:291–97. doi:https://doi.org/10.1016/1359-4311(95)00033-X.
- Rusly, E., L. Aye, W. W. S. Charters, and A. Ooi. 2005. CFD analysis of ejector in a combined ejector cooling system. International Journal of Refrigeration 28 (7):1092–101. doi:https://doi.org/10.1016/j.ijrefrig.2005.02.005.
- Shestopalov, K. O., B. J. Huang, V. O. Petrenko, and O. S. Volovyk. 2015. Investigation of an experimental ejector refrigeration machine operating with refrigerant R245fa at design and off-design working conditions. Part 1. Theoretical analysis. International Journal of Refrigeration 55:201e11. doi:https://doi.org/10.1016/j.ijrefrig.2015.01.016.
- Sriveerakul, T., S. Aphornratana, and K. Chunnanond. 2007. Performance prediction of steam ejector using computational fluid dynamics: Part 1. Validation of the CFD results. International Journal of Thermal Sciences 46 (8):812–22. doi:https://doi.org/10.1016/j.ijthermalsci.2006.10.014.
- Tao, W. Q. 2001. Numerical heat transfer. 2nd ed. Xi’an, China: Xi’an Jiaotong University Press.
- Yakhot, V., and S. A. Orszag. 1986. Renormalization group analysis of turbulence. I. Basic theory. Journal of Scientific Computing 1 (1):3–51. doi:https://doi.org/10.1007/BF01061452.
- Yuan, Y., L. Tan, Y. Xu, and Y. Yuan. 2015. Three-dimensional CFD modeling and simulation on the performance of steam ejector heat pump for dryer section of the paper machine. Vacuum 122:168–78. doi:https://doi.org/10.1016/j.vacuum.2015.09.016.
- Zhang, K., X. Chen, C. N. Markides, Y. Yang, and S. Shen. 2016. Evaluation of ejector performance in an organic Rankine cycle. Applied Energy 184:404e12. doi:https://doi.org/10.1016/j.apenergy.2016.10.017.