References
- Abokersh, M. H., M. Osman, O. El‐Baz, M. El‐Morsi, and O. Sharaf. 2017. Review of the phase change material (PCM) usage for solar domestic water heating systems (SDWHS). International Journal of Energy Research. doi:https://doi.org/10.1002/er.3765.
- Agarwal, A., and R. M. Sarviya. 2016. An experimental investigation of shell and tube latent heat storage for solar dryer using paraffin wax as heat storage material. Engineering Science and Technology 19 (1):619–31.
- Agyenim, F., P. Eames, and M. Smyth. 2010. Heat transfer enhancement in medium temperature thermal energy storage system using a multitube heat transfer array. Renewable Energy 35:198–207. doi:https://doi.org/10.1016/j.renene.2009.03.010.
- Al- Abidi, A. A., S. Mat, K. Sopian, M. Y. Sulaiman, and A. T. Mohammad. 2013. Internal and external fin heat transfer enhancement technique for latent heat thermal energy storage in triplex heat exchangers. Applied Thermal Engineering 53:147–56. doi:https://doi.org/10.1016/j.applthermaleng.2013.01.011.
- Alkilani, M., M. Sopian, K. Alghoul, M. Sohif Mat, and M. H. Ruslan. 2011. Review of solar air collectors with thermal storage units. Renewable and Sustainable Energy Reviews 15:1476–90. doi:https://doi.org/10.1016/j.rser.2010.10.019.
- Cardenas, B., and N. Leon. 2013. High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques. Renewable and Sustainable Energy Reviews 27:724–37. doi:https://doi.org/10.1016/j.rser.2013.07.028.
- Erek, A., Z. İlken, and M. A. Acar. 2005. Experimental and numerical investigation of thermal energy storage with a finned tube. International Journal of Energy Research 29 (4):283–301. doi:https://doi.org/10.1002/er.1057.
- Fan, L., and J. M. Khodadadi. 2011. Thermal conductivity enhancement of phase change materials for thermal energy storage: A review. Renewable and Sustainable Energy Reviews 15:24–46. doi:https://doi.org/10.1016/j.rser.2010.08.007.
- Hadiya, J. P., and A. K. N. Shukla. 2016. Experimental thermal behavior response of paraffin wax as storage unit. Journal of Thermal Analysis and Calorimetry 124 (3):1511–18. doi:https://doi.org/10.1007/s10973-016-5276-2.
- Hosseini, M. J., M. Rahimi, and R. Bahrampoury. 2015. Thermal analysis of PCM containing heat exchanger enhanced with normal annular fins. Mechanical Sciences 6:221–34. doi:https://doi.org/10.5194/ms-6-221-2015.
- Kashani, S., and E. Lakzian. 2014. Numerical analysis of melting of nano-enhanced phase change material in latent heat thermal energy storage system. Thermal Science 18 (2):S335–S345. doi:https://doi.org/10.2298/TSCI111212163K.
- Kline, S., and F. McClintock. 1953. Describing uncertainties in single-sample experiments. Mechanical Engineering 75:3–8.
- Mat, S., A. A. Al-Abidi, K. Sopian, M. Y. Sulaiman, and A. T. Mohammad. 2013. Enhance heat transfer for PCM melting in triplex tube with internal fin. Energy Conversion and Management 74:223–36. doi:https://doi.org/10.1016/j.enconman.2013.05.003.
- Mehta, D. S., K. Solanki, M. K. Rathod, and J. Banerjee. 2019a. Influence of orientation on thermal performance of shell and tube latent heat storage unit. Applied Thermal Engineering 157:113719. doi:https://doi.org/10.1016/j.applthermaleng.2019.113719.
- Mehta, D. S., K. Solanki, M. K. Rathod, and J. Banerjee. 2019b. Thermal performance of shell and tube latent heat storage unit: Comparative assessment of horizontal and vertical orientation. Journal of Energy Storage 23:344–62. doi:https://doi.org/10.1016/j.est.2019.03.007.
- Moffat, R. J. 1988. Describing the uncertainties in experimental results. Experimental Thermal and Fluid Science 1:3–17. doi:https://doi.org/10.1016/0894-1777(88)90043-X.
- Mosaffa, A., F. Talati, M. A. Rosen, and H. B. Tabrizi. 2013. Phase Change Material Solidification In A Finned Cylindrical Shell Thermal Energy Storage: An approximate analytical approach. Thermal Science 17 (2):407–18. doi:https://doi.org/10.2298/TSCI120326207M.
- Murray, R. E., and D. Groulx. 2014a. Experimental study of the phase change and energy characteristics inside a cylindrical latent heat energy storage system: Part 1 consecutive charging and discharging. Renewable Energy 62:571–81. doi:https://doi.org/10.1016/j.renene.2013.08.007.
- Murray, R. E., and D. Groulx. 2014b. Experimental study of the phase change and energy characteristics inside a cylindrical latent heat energy storage system: Part 2 simultaneous charging and discharging. Renewable Energy 63:724–34. doi:https://doi.org/10.1016/j.renene.2013.10.004.
- Rabienataj Darzi, A. A., M. Jourabian, and M. Farhadi. 2016. Melting and solidification of PCM enhanced by radial conductive fins and nanoparticles in cylindrical annulus. Energy Conversion and Management 118:253–63. doi:https://doi.org/10.1016/j.enconman.2016.04.016.
- Rengarajan, R., and R. Karunakaran. 2018. Experimental study of solidification of paraffin wax in solar based triple concentric tube thermal energy storage system. Thermal Science 22 (2):973–78. doi:https://doi.org/10.2298/TSCI160311021R.
- Rudonja, N., M. Komatina, G. Zivkovic, and D. Antonijevic. 2016. Heat transfer enhancement through PCM thermal storage by use of copper fins. Thermal Science 20 (1):S251–S259. doi:https://doi.org/10.2298/TSCI150729136R.
- Senthil, R. 2017. Effect of uniform and variable fin height on charging and discharging of pcm in a horizontal cylindrical thermal storage. Thermal Science. doi:https://doi.org/10.2298/TSCI170709239S.
- Senthil, R., and M. Cheralathan. 2017. Effect of the phase change material in a solar receiver on thermal performance of parabolic dish collector. Thermal Science 21 (6B):2803–12. doi:https://doi.org/10.2298/TSCI150730007S.
- Trp, A. 2005. An experimental and numerical investigation of heat transfer during technical grade paraffin melting and solidification in a shell and tube latent thermal energy storage. Solar Energy 79:648–60. doi:https://doi.org/10.1016/j.solener.2005.03.006.
- Walter, H., A. Beck, and M. Hameter. 2015. Influence of the Fin design on the melting and solidification process of NaNO3 in a thermal energy storage system. Journal of Energy and Power Engineering 9:913–28.
- Wang, -W.-W., K. Zhang, L. Wang, and Y. L. He. 2013. Numerical study of the heat charging and discharging characteristics of a shell-and-tube phase change heat storage unit. Applied Thermal Engineering 48:542–53. doi:https://doi.org/10.1016/j.applthermaleng.2013.04.063.
- Xiao, X., and P. Zhang. 2015a. Numerical and experimental study of heat transfer characteristics of a shell-tube latent heat storage system: Part I -charging process. Energy 79:337–50. doi:https://doi.org/10.1016/j.energy.2014.11.020.
- Xiao, X., and P. Zhang. 2015b. Numerical and experimental study of heat transfer characteristics of a shell-tube latent heat storage system: Part II -discharging process. Energy 80:177–89. doi:https://doi.org/10.1016/j.energy.2014.11.061.
- Yazici, Y., M. Avci, O. Aydin, and M. Akgun. 2014a. Effect of eccentricity on melting behavior of paraffin in a horizontal tube-in-shell storage unit: An experimental study. Solar Energy 101:291–98. doi:https://doi.org/10.1016/j.solener.2014.01.007.
- Yazici, Y., M. Avci, O. Aydin, and M. Akgun. 2014b. On effect of eccentricity of a horizontal tube-in-shell storage unit on solidification of a PCM. Applied Thermal Engineering 64:1–9. doi:https://doi.org/10.1016/j.applthermaleng.2013.12.005.