References
- Aghbashlo, M., M. Mandegari, M. Tabatabaei, S. Farzad, M. Mojarab Soufiyan, and J. F. Görgens. 2018a. Exergy analysis of a lignocellulosic-based biorefinery annexed to a sugarcane mill for simultaneous lactic acid and electricity production. Energy 149:623–38. doi:https://doi.org/10.1016/j.energy.2018.02.063.
- Aghbashlo, M., and M. A. Rosen. 2018. Exergoeconoenvironmental analysis as a new concept for developing thermodynamically, economically, and environmentally sound energy conversion systems. Journal of Cleaner Production 187:190–204. doi:https://doi.org/10.1016/j.jclepro.2018.03.214.
- Aghbashlo, M., M. Tabatabaei, E. Khalife, T. Roodbar Shojaei, and A. Dadak. 2018b. Exergoeconomic analysis of a DI diesel engine fueled with diesel/biodiesel (B5) emulsions containing aqueous nano cerium oxide. Energy 149:967–78. doi:https://doi.org/10.1016/j.energy.2018.02.082.
- Aghbashlo, M., M. Tabatabaei, P. Mohammadi, B. Khoshnevisan, M. A. Rajaeifar, and M. Pakzad. 2017. Neat diesel beats waste-oriented biodiesel from the exergoeconomic and exergoenvironmental point of views. Energy Conversion and Management 148:1–15. doi:https://doi.org/10.1016/j.enconman.2017.05.048.
- Aghbashlo, M., M. Tabatabaei, S. Soltanian, and H. Ghanavati. 2019a. Biopower and biofertilizer production from organic municipal solid waste: An exergoenvironmental analysis. Renewable Energy 143:64–76. doi:https://doi.org/10.1016/j.renene.2019.04.109.
- Aghbashlo, M., M. Tabatabaei, S. Soltanian, H. Ghanavati, and A. Dadak. 2019b. Comprehensive exergoeconomic analysis of a municipal solid waste digestion plant equipped with a biogas genset. Waste Management 87:485–98. doi:https://doi.org/10.1016/j.wasman.2019.02.029.
- Aziz, M., C. Fushimi, Y. Kansha, K. Mochidzuki, S. Kaneko, A. Tsutsumi, K. Matsumoto, T. Hashimoto, N. Kawamoto, K. Oura, et al. 2011. Innovative energy-efficient biomass drying based on self-heat recuperation technology. Chemical Engineering & Technology 34:1095–103. doi:https://doi.org/10.1002/ceat.201100065.
- Aziz, M., Y. Kansha, and A. Tsutsumi. 2011. Self-heat recuperative fluidized bed drying of brown coal. Chemical Engineering & Processing Process Intensification 50:944–51. doi:https://doi.org/10.1016/j.cep.2011.07.005.
- Azizi, M., N. Mohebbi, and F. D. Felice. 2016. Developing a rating model for selection solar wood drying location *. Agriculture & Agricultural Science Procedia 8:378–86. doi:https://doi.org/10.1016/j.aaspro.2016.02.033.
- Balat, M., and K. Bozbas. 2006. Wood as an energy source: Potential trends, usage of wood, and energy politics. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 28 (9):837–44. doi:https://doi.org/10.1080/00908310600718791.
- El-Sayed, Y. M. 2001. Designing desalination systems for higher productivity. Desalination 134:129–58. doi:https://doi.org/10.1016/S0011-9164(01)00122-9.
- Elustondo, D., S. Ahmed, and L. Oliveira. 2014. Drying western red cedar with superheated steam. Drying Technology 32:550–56. doi:https://doi.org/10.1080/07373937.2013.843190.
- Fushimi, C., Y. Kansha, M. Aziz, K. Mochidzuki, S. Kaneko, A. Tsutsumi, K. Matsumoto, K. Yokohama, K. Kosaka, N. Kawamoto, et al. 2010. Novel drying process based on self-heat recuperation technology. Drying Technology 29:105–10. doi:https://doi.org/10.1080/07373937.2010.482719.
- Han, D., W. He, C. Yue, W. Pu, and L. Liang. 2014a. Analysis of energy saving for ammonium sulfate solution processing with self-heat recuperation principle. Applied Thermal Engineering 73:641–49. doi:https://doi.org/10.1016/j.applthermaleng.2014.08.026.
- Han, D., W. F. He, C. Yue, and W. H. Pu. 2017. Study on desalination of zero-emission system based on mechanical vapor compression ☆. Applied Energy 185:1490–96. doi:https://doi.org/10.1016/j.apenergy.2015.12.061.
- Han, D., T. Peng, W. He, C. Yue, W. Pu, and L. Liang. 2014b. Advanced energy saving in the evaporation system of ammonium sulfate solution with self-heat recuperation technology ☆. Energy Procedia 61:131–36. doi:https://doi.org/10.1016/j.egypro.2014.11.923.
- Han, D., C. Yue, W. He, L. Liang, and W. Pu. 2015. Energy saving analysis for a solution evaporation system with high boiling point elevation based on self-heat recuperation theory. Desalination 355:197–203. doi:https://doi.org/10.1016/j.desal.2014.10.044.
- Hansson, L., and A. L. Antti. 2003. The effect of microwave drying on Norway spruce woods strength: A comparison with conventional drying. Journal of Materials Processing Technology 141:41–50. doi:https://doi.org/10.1016/S0924-0136(02)01102-0.
- He, W. F., D. Han, W. P. Zhu, C. Ji. 2018. Thermo-economic analysis of a water-heated humidification-dehumidification desalination system with waste heat recovery. Energy Conversion and Management 160:182–90. doi:https://doi.org/10.1016/j.enconman.2018.01.048.
- He, W. F., H. X. Yang, and D. Han. 2018. Thermodynamic analysis of a power and water combined system with geothermal energy utilization. Geothermics 76:106–15. doi:https://doi.org/10.1016/j.geothermics.2018.06.008.
- Kabeel, A. E., A. M. Hamed, and S. A. El-Agouz. 2010. Cost analysis of different solar still configurations. Energy 35:2901–08. doi:https://doi.org/10.1016/j.energy.2010.03.021.
- Liu, Y., M. Aziz, Y. Kansha, S. Bhattacharya, and A. Tsutsumi. 2014. Application of the self-heat recuperation technology for energy saving in biomass drying system. Fuel Processing Technology 117:66–74. doi:https://doi.org/10.1016/j.fuproc.2013.02.007.
- Liu, Y., M. Aziz, Y. Kansha, and A. Tsutsumi. 2013. A novel exergy recuperative drying module and its application for energy-saving drying with superheated steam. Chemical Engineering Science 100:392–401. doi:https://doi.org/10.1016/j.ces.2013.01.044.
- Lu, Z., T. Tang, G. Zhou, W. Jia, M. Wang, J. Xu et al. 2016. Effects of dehumidification drying environment on drying speed of one component waterborne wood top coating. Applied Surface Science 365:131–35. doi:https://doi.org/10.1016/j.apsusc.2016.01.021.
- Luo, J., C. J. Yu, X. H. Zhai, et al. 2016. Hot-air drying characteristics of typical cork and the drying model. Thermal Power Generation 45:26–33. In Chinese. doi:https://doi.org/10.3969/j.issn.1002-3364.2016.03.026.
- Matsuda, K., K. Kawazuishi, Y. Hirochi, R. Sato, Y. Kansha, C. Fushimi, Y. Shikatani, H. Kunikiyo, and A. Tsutsumi. 2010. Advanced energy saving in the reaction section of the hydro-desulfurization process with self-heat recuperation technology. Applied Thermal Engineering 30:2300–05. doi:https://doi.org/10.1016/j.applthermaleng.2010.05.003.
- Minea, V. 2013. Drying heat pumps – Part II: Agro-food, biological and wood products. International Journal of Refrigeration 36:659–73. doi:https://doi.org/10.1016/j.ijrefrig.2012.11.026.
- Minea, V. 2008. Energetic and ecological aspects of softwood drying with high-temperature heat pumps. Drying Technology 26:1373–81. doi:https://doi.org/10.1080/07373930802333536.
- Ohijeagbon, I. O., M. A. Waheed, and S. O. Jekayinfa. 2013. Methodology for the physical and chemical exergetic analysis of steam boilers. Energy 53:153–64. doi:https://doi.org/10.1016/j.energy.2013.02.039.
- Page, G. 1949. Factors influencing the maximum rates of air-drying shelled corn in thin layer. M.S. Thesis, Purdue University West Lafayette. Indiana: USA.
- Redman, A. L., H. Bailleres, P. Perré, E. Carr and I. Turner. 2017. A relevant and robust vacuum-drying model applied to hardwoods. Wood Science and Technology 51:701–19. doi:https://doi.org/10.1007/s00226-017-0908-7.
- Şahin, A. Ş., and G. Serkan. 2016. Determination of drying rates of different timber kinds. Energy Sources 38 (8):6. doi:https://doi.org/10.1080/15567036.2011.653623.
- Schnabel, T., H. Huber, and A. Petutschnigg. 2017. Modelling and simulation of deformation behaviour during drying using a concept of linear difference method. Wood Science and Technology 51:463–73. doi:https://doi.org/10.1007/s00226-017-0897-6.
- Smith, R. 2005. Chemical process design and integration. Wiley: New York.
- Vongpradubchai, S., and P. Rattanadecho. 2011. Microwave and hot air drying of wood using a rectangular waveguide. Drying Technology 29:451–60. doi:https://doi.org/10.1080/07373937.2010.505312.
- Younsi, R., D. Kocaefe, and Y. Kocaefe. 2006. Three-dimensional simulation of heat and moisture transfer in wood. Applied Thermal Engineering 26:1274–85. doi:https://doi.org/10.1016/j.applthermaleng.2005.10.029.
- Zhan, J. F., and S. Avramidis. 2017. Evaluation strategy of softwood drying stresses during conventional drying: A “mechano-sorptive creep gradient” concept. Wood Science and Technology 51:1033–49. doi:https://doi.org/10.1007/s00226-017-0937-2.
- Zhang, Y., C. Zhu, H. Zhang, W. Zheng, S. You, and Y. Zhen. 2018. Experimental study of a humidification-dehumidification desalination system with heat pump unit. Desalination 442:108–17. doi:https://doi.org/10.1016/j.desal.2018.05.020.