References
- Agagna, B., A. Smaili, and Q. Falcoz. 2017. Coupled simulation method by using MCRT and FVM techniques for performance analysis of a parabolic trough solar collector. Energy Procedia 141:34–38. doi:https://doi.org/10.1016/j.egypro.2017.11.007.
- Blaabjerg, F., D. M. Ionel, Y. Yang, and H. Wang. 2017. Renewable energy systems: Technology overview and perspectives. In Renewable energy devices and systems with simulations in MATLAB and ANSYS®, 1–16. CRC Press; Taylor & Francis Group.
- Cheng, Z. D., Y. L. He, F. Q. Cui, B. C. Du, Z. J. Zheng, and Y. Xu. 2014a. Comparative and sensitive analysis for parabolic trough solar collectors with a detailed Monte Carlo ray-tracing optical model. Applied Energy 115:559–72. doi:https://doi.org/10.1016/j.apenergy.2013.11.001.
- Cheng, Z. D., Y. L. He, K. Wang, B. C. Du, and F. Q. Cui. 2014b. A detailed parameter study on the comprehensive characteristics and performance of a parabolic trough solar collector system. Applied Thermal Engineering 63 (1):278–89. doi:https://doi.org/10.1016/j.applthermaleng.2013.11.011.
- Cheng, Z.-D., X.-R. Zhao, and Y.-L. He. 2018. Novel optical efficiency formulas for parabolic trough solar collectors: Computing method and applications. Applied energy, 224, 682–97.
- Duffie, J. A., and W. A. Beckman. 2013. Solar engineering of thermal processes. Hoboken, NJ: John Wiley & Sons, Inc.
- Fan, M., S. You, J. Xia, W. Zheng, H. Zhang, H. Liang, X. Li, and B. Li. 2018. An optimized Monte Carlo ray tracing optical simulation model and its applications to line-focus concentrating solar collectors. Applied Energy 225:769–81. doi:https://doi.org/10.1016/j.apenergy.2018.05.067.
- Ghodbane, M., and B. Boumeddane. 2018. Engineering design and optical investigation of a concentrating collector: Case study of a parabolic trough concentrator. Journal of Fundamental and Applied Sciences 10 (2):148–71.
- Hoseinzadeh, H., A. Kasaeian, and M. B. Shafii. 2018. Geometric optimization of parabolic trough solar collector based on the local concentration ratio using the Monte Carlo method. Energy Conversion and Management 175:278–87. doi:https://doi.org/10.1016/j.enconman.2018.09.001.
- Jowzi, M., F. Veysi, and G. Sadeghi. 2018. Novel experimental approaches to investigate distribution of solar insolation around the tubes in evacuated tube solar collectors. Renewable Energy 127:724–32. doi:https://doi.org/10.1016/j.renene.2018.04.089.
- Liang, H., C. Zhu, M. Fan, S. You, H. Zhang, and J. Xia. 2018. Study on the thermal performance of a novel cavity receiver for parabolic trough solar collectors. Applied Energy 222:790–98. doi:https://doi.org/10.1016/j.apenergy.2018.04.030.
- Liang, H., S. You, and H. Zhang. 2016. Comparison of three optical models and analysis of geometric parameters for parabolic trough solar collectors. Energy 96:37–47. doi:https://doi.org/10.1016/j.energy.2015.12.050.
- Liu, X., J. Huang, and Q. Mao. 2015. Sensitive analysis for the efficiency of a parabolic trough solar collector based on orthogonal experiment. International Journal of Photoenergy 2015:1–7. doi:https://doi.org/10.1155/2015/151874.
- Manikandan, G., S. Iniyan, and R. Goic. 2019. Enhancing the optical and thermal efficiency of a parabolic trough collector–a review. Applied Energy 235:1524–40. doi:https://doi.org/10.1016/j.apenergy.2018.11.048.
- Montesa, I. E. P., A. M. Beniteza, O. M. Chaveza, and A. E. L. Herrera. 2014. Design and construction of a parabolic trough solar collector for process heat production. Energy Procedia 57:2149–58. doi:https://doi.org/10.1016/j.egypro.2014.10.181.
- Mwesigye, A., and J. P. Meyer. 2017. Optimal thermal and thermodynamic performance of a solar parabolic trough receiver with different nanofluids and at different concentration ratios. Applied Energy 193:393–413. doi:https://doi.org/10.1016/j.apenergy.2017.02.064.
- Mwesigye, A., T. Bello-Ochende, and J. P. Meyer. 2013. Numerical investigation of entropy generation in a parabolic trough receiver at different concentration ratios. Energy 53:114–27. doi:https://doi.org/10.1016/j.energy.2013.03.006.
- Mwesigye, A., Z. Huan, and J. P. Meyer. 2016. Thermal performance and entropy generation analysis of a high concentration ratio parabolic trough solar collector with Cu-Therminol VP-1 nanofluid. Energy Conversion and Management 120:449–65. doi:https://doi.org/10.1016/j.enconman.2016.04.106.
- Overman, E. 2011. A matlab tutorial. Columbus. OH. USA: Department of Mathematics, the Ohio State University.
- Pavlovic, S. R., and V. P. Stefanovic. 2015. Ray tracing study of optical characteristics of the solar image in the receiver for a thermal solar parabolic dish collector. Journal of Solar Energy 2015:1–10. doi:https://doi.org/10.1155/2015/326536.
- Potenza, M., M. Milanese, G. Colangelo, and A. de Risi. 2017. Experimental investigation of transparent parabolic trough collector based on gas-phase nanofluid. Applied Energy 203:560–70. doi:https://doi.org/10.1016/j.apenergy.2017.06.075.
- Rehan, M. A., M. Ali, N. A. Sheikh, M. S. Khalil, G. Q. Chaudhary, T. Ur Rashid, and M. Shehryar. 2018. Experimental performance analysis of low concentration ratio solar parabolic trough collectors with nanofluids in winter conditions. Renewable Energy 118:742–51. doi:https://doi.org/10.1016/j.renene.2017.11.062.
- Rodriguez-Sanchez, D., and G. Rosengarten. 2015. Improving the concentration ratio of parabolic troughs using a second-stage flat mirror. Applied Energy 159:620–32. doi:https://doi.org/10.1016/j.apenergy.2015.08.106.
- Sadeghi, G., A. L. Pisello, H. Safarzadeh, M. Poorhossein, and M. Jowzi. 2020. On the effect of storage tank type on the performance of evacuated tube solar collectors: Solar radiation prediction analysis and case study. Energy 198:117331. doi:https://doi.org/10.1016/j.energy.2020.117331.
- Sadeghi, G., H. Safarzadeh, and M. Ameri. 2019. Experimental and numerical investigations on performance of evacuated tube solar collectors with parabolic concentrator, applying synthesized cu2o/distilled water nanofluid. Energy for Sustainable Development 48:88–106. doi:https://doi.org/10.1016/j.esd.2018.10.008.
- Sadeghi, G., M. Najafzadeh, and H. Safarzadeh. 2020a. Utilizing gene-expression programming in modelling the thermal performance of evacuated tube solar collectors. Journal of Energy Storage 30:101546. doi:https://doi.org/10.1016/j.est.2020.101546.
- Sadeghi, G., M. Najafzadeh, and M. Ameri. 2020b. Thermal characteristics of evacuated tube solar collectors with coil inside: An experimental study and evolutionary algorithms. Renewable Energy 151:575–88. doi:https://doi.org/10.1016/j.renene.2019.11.050.
- Sadeghi, G., S. Nazari, M. Ameri, and F. Shama. 2020c. Energy and exergy evaluation of the evacuated tube solar collector using cu2o/water nanofluid utilizing ann methods. Sustainable Energy Technologies and Assessments 37:100578. doi:https://doi.org/10.1016/j.seta.2019.100578.
- Wang, Y., Q. Liu, J. Lei, and H. Jin. 2015. Performance analysis of a parabolic trough solar collector with non-uniform solar flux conditions. International Journal of Heat and Mass Transfer 82:236–49. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2014.11.055.
- Wendelin, T. 2003. SolTrace: A new optical modeling tool for concentrating solar optics. In ASME 2003 International Solar Energy Conference, Solar Energy, Kohala Coast, HI, March 15–18, 253–60. ASME. https://doi.org/10.1115/ISEC2003-44090
- Zhu, S., G. Yu, Y. Ma, Y. Cheng, Y. Wang, S. Yu, Z. Wu, W. Dai, and E. Luo. 2019. A free-piston Stirling generator integrated with a parabolic trough collector for thermal-to-electric conversion of solar energy. Applied Energy 242:1248–58. doi:https://doi.org/10.1016/j.apenergy.2019.03.169.