References
- Arand, S. J., and M. Ardebili. 2016. Cogging torque reduction in axial-flux permanent magnet wind generators with yokeless and segmented armature by radially segmented and peripherally shifted magnet pieces. Renewable Energy 99:95–106. doi:https://doi.org/10.1016/j.renene.2016.06.054.
- Aydın, M., and M. Gulec. 2014. Reduction of cogging torque in double-rotor axial-flux permanent-magnet disk motors: A review of cost-effective magnet-skewing techniques with experimental verification. IEEE Transactions on Industrial Electronics 61 (9):5025–34. doi:https://doi.org/10.1109/TIE.2013.2276777.
- Aydın, M., Z. Q. Zhu, T. A. Lipo, and D. Howe. 2007. Minimization of cogging torque in axial flux permanent magnet machines: Design concepts. IEEE Transactions on Magnetics 43 (9):3614–22. doi:https://doi.org/10.1109/TMAG.2007.902818.
- Cetin, E., and F. Daldaban. 2018. Reducing torque ripples of the axial flux PM motors by magnet stepping and shifting. Engineering, Technology & Applied Science Research 8 (1):2385–88. doi:https://doi.org/10.48084/etasr.1700.
- Gonzalez, D. A., J. A. Tapia, and A. L. Bettancourt. 2007. Design consideration to reduce cogging torque in axial flux permanent magnet machines. IEEE Transactions on Magnetics 43 (8):3435–40. doi:https://doi.org/10.1109/TMAG.2007.899349.
- Hsieh, M. F., D. G. Dorrell, Y. H. Yeh, and S. Ekram. 2009. Cogging torque reduction in axial flux machines for small wind turbines, 35th Annual Conference of IEEE Industrial Electronics,Porto, Portugal, 4435–39. doi:https://doi.org/10.1109/IECON.2009.5414896.
- Huang, M. S., P. C. Chen, Y. S. Huang, and K. C. Chen. 2016. Reduce the cogging torque of axial flux permanent magnet synchronous motor for electric vehicle applications, IEEE International Conference on Industrial Technology, Taipei, Taiwan, May. doi:https://doi.org/10.1109/ICIT.2016.7474749.
- Hüner, E., and G. Zeka. 2020. Reduction of cogging torque and improvement of electrical parameters in axial flux permanent magnet (AFPM) synchronous generator with experimental verification. Progress In Electromagnetics Research C 104:99–113. doi:https://doi.org/10.2528/PIERC20050302.
- Husain, T., I. Hasan, Y. Sozer, I. Husain, and E. Muljadi. 2018. Cogging torque minimization in transverse flux machines. IEEE Transactions on Industry Applications 55 (1):385–97. doi:https://doi.org/10.1109/TIA.2018.2868541.
- Jia, L., M. Lin, W. Le, N. Li, and Y. Kong. 2020. Dual-Skew magnet for cogging torque minimization of axial flux PMSM with segmented stator. IEEE Transactions on Magnetics 56 (2):1–6. doi:https://doi.org/10.1109/TMAG.2019.2951704.
- Kim, J. H., Y. Li, E. Cetin, and B. Sarlioglu. 2019 March/April. Influence of rotor tooth shaping on cogging torque of axial flux-switching permanent magnet machine. IEEE Transactions on Industry Application. 55 (2). doi: https://doi.org/10.1109/TIA.2018.2873530.
- Kumar, P., and R. K. Srivastava. 2018. Cost-effective stator modification techniques for cogging torque reduction in axial flux permanent magnet machines, IEEE Transportation Electrification Conference and Expo, Bangkok, Thailand. doi:https://doi.org/10.1109/ITEC-AP.2018.8433291.
- Kumar, P., and R. K. Srivastava. 2019. Effect of relative slot-opening shift on cogging torque and performance of an axial flux permanent magnet machine. Journal of the Institution of Engineers (India): Series B 100 (2):117–22. doi:https://doi.org/10.1007/s40031-018-0368-y.
- Letelier, A., J. A. Tapia, R. Wallace, and A. Valenzuela. 2005. Cogging torque reduction in an axial flux PM machine with extended speed range, IEEE International Conference on Electric Machines and Drives, San Antonio, TX, USA, 1261–67. doi:https://doi.org/10.1109/IEMDC.2005.195884.
- Li, J., W. Choi, S. G. Lee, J. H. Jang, and Y. H. Cho. 2012. Minimization of cogging torque in fractional-slot axial flux permanent magnet synchronous machine with conventional structure, Sixth International Conference on Electromagnetic Field Problems and Applications, Dalian, China. doi:https://doi.org/10.1109/ICEF.2012.6310420.
- Patel, A. N., and B. N. Suthar. 2019. Reduction of cogging torque of surface mounted axial flux permanent magnet brushless DC motor with slot shifting technique. International Journal of Engineering and Advanced Technology (IJEAT) 8 (4):1150–54.
- Reza, M. M., A. Ahmad, P. Kumar, and R. K. Srivastava. 2017. Semi-analytical model for triangular skewed permanent magnet axial flux machine, IEEE Transportation Electrification Conference, Pune, India. doi:https://doi.org/10.1109/ITEC-India.2017.8333843.
- Tiegna, H., Y. Amara, and G. Barakat. 2014. Study of cogging torque in axial flux permanent magnet machines using an analytical model. IEEE Transactions on Magnetics 50 (2). doi: https://doi.org/10.1109/TMAG.2013.2279075.
- Zhu, Z. Q., and D. Howe. 2000. Influence of design parameters on cogging torque in permanent magnet machines. IEEE Transactions on Energy Conversion 15 (4):407–12. doi:https://doi.org/10.1109/60.900501.