References
- Alizadeh Pahlavani, M. R., and E. Shokati Asl. 2020. DC–DC SIDO converter with low‐voltage stress on switches: Analysis of operating modes and design considerations. IET Power Electronics 13 (2):233–47. doi:https://doi.org/10.1049/iet-pel.2018.6184.
- Ashokkumar, R., M. Suresh, B. Sharmila, C. Hitesh Panchal, K. V. U. Gokul, K. K. Sadasivuni, and M. Israr. 2021. A novel method for arduino based electric vehicle emulator. International Journal of Ambient Energy 1–7. doi:https://doi.org/10.1080/01430750.2020.1860129.
- Banerjee, S., A. Ghosh, and N. Rana. 2017. An improved interleaved boost converter with PSO-based optimal type-III controller. IEEE Journal of Emerging and Selected Topics in Power Electronics 5 (1):323–37. doi:https://doi.org/10.1109/JESTPE.2016.2608504.
- Banerjee, S., A. Ghosh, and N. Rana. 2017. An improved interleaved boost converter with PSO-based optimal type-III controller. IEEE Journal of Emerging and Selected Topics in Power Electronics 5 (1):323–37. doi:https://doi.org/10.1109/JESTPE.2016.2608504.
- Barath, N., A. Soundarrajan, S. Stepenko, O. Bondarenko, S. Padmanaban, and A. Prystupa. 2020. Hybrid multiport converter for high step-up renewable energy applications. IEEE KhPI Week on Advanced Technology (Khpiweek) 2020. 10.1109/KhPIWeek51551.2020.9250178
- Behjati, H., and A. Davoudi. 2013. A multiple-input multiple-output DC–DC converter. IEEE Transactions on Industry Applications 49 (3):1464–79. doi:https://doi.org/10.1109/TIA.2013.2253440.
- Bhatia, V., and P. Whig. 2014. Performance analysis of multi functional bot system design using microcontroller. International Journal of Intelligent Systems and Applications 6 (2):69–75. doi:https://doi.org/10.5815/ijisa.2014.02.09.
- Faraji, R., L. Ding, T. Rahimi, M. Kheshti, and M. R. Islam. 2021. Soft-switched three-port dc-dc converter with SIMPLE Auxiliary circuit. IEEE Access 9:66738–50. doi:https://doi.org/10.1109/ACCESS.2021.3076183.
- Ghosh, A., and S. Banerjee. 2020. A comparative performance study of a closed‐loop boost converter with classical and advanced controllers using simulation and real‐time experimentation. International Transactions on Electrical Energy Systems 30 (10). doi:https://doi.org/10.1002/2050-7038.12537.
- Ghosh, A., S. Banerjee, M. K. Sarkar, and P. Dutta. 2016. Design and implementation of type‐II and type‐III controller for DC–DC switched‐mode boost converter by using K ‐factor approach and optimisation techniques. IET Power Electronics 9 (5):938–50. doi:https://doi.org/10.1049/iet-pel.2015.0144.
- Jiang, W., and B. Fahimi. 2011. Multiport power electronic interface—concept, modeling, and design. IEEE Transactions on Power Electronics 26 (7):1890–900. doi:https://doi.org/10.1109/TPEL.2010.2093583.
- Kaushik, S., K. Srinivasan, B. Sharmila, D. Devasena, M. Suresh, R. A. Hitesh Panchal, K. K. Sadasivuni, and N. Srimali. 2021. Continuous monitoring of power consumption in urban buildings based on internet of things. International Journal of Ambient Energy 1–7. doi:https://doi.org/10.1080/01430750.2021.1931961.
- Ma, D., W.-H. Ki, and C.-Y. Tsui. 2003. A pseudo-CCM/DCM SIMO switching converter with freewheel switching. IEEE Journal of Solid-State Circuits 38 (6):1007–14. doi:https://doi.org/10.1109/JSSC.2003.811976.
- Mishra, S., and O. Ray. 2014. Advances in nanogrid technology and its integration into rural electrification in India. 2014 International Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE ASIA). Hiroshima, Japan.
- Mishra, S. K., K. K. Nayak, M. S. Rana, and V. Dharmarajan. 2019. Switched-boost action based multiport converter. IEEE Transactions on Industry Applications 55 (1):964–75. doi:https://doi.org/10.1109/TIA.2018.2869098.
- Moon, Y.-J., Y.-S. Roh, J.-C. Gong, and C. Yoo. 2012. Load-independent current control technique of a single-inductor multiple-output switching DC–DC converter. IEEE Transactions on Circuits and Systems II: Express Briefs 59 (1):50–54. doi:https://doi.org/10.1109/TCSII.2011.2173969.
- Onwuchekwa, C. N., and A. Kwasinski. 2012. A modified-time-sharing switching technique for multiple-input DC–DC converters. IEEE Transactions on Power Electronics 27 (11):4492–502. doi:https://doi.org/10.1109/TPEL.2011.2180740.
- P. Manojkumar, M. Suresh, Alim Al Ayub Ahmed, Hitesh Panchal, Christopher Asir Rajan, A. Dheepanchakkravarthy, A. Geetha, B. Gunapriya, Suman Mann & Kishor Kumar Sadasivuni (2021) A novel home automation distributed server management system using Internet of Things, International Journal of Ambient Energy, doi: https://doi.org/10.1080/01430750.2021.1953590
- Patel, M. A., K. Asad, Z. Patel, M. Tiwari, P. Prajapati, M. Hitesh Panchal, R. S. Suresh, and M. Israr. 2021. Design and optimisation of slotted stator tooth switched reluctance motor for torque enhancement for electric vehicle applications. International Journal of Ambient Energy 1–6. doi:https://doi.org/10.1080/01430750.2021.1873857.
- Patra, P., A. Patra, and N. Misra. 2012. A single-inductor multiple-output switcher with simultaneous buck, boost, and inverted outputs. IEEE Transactions on Power Electronics 27 (4):1936–51. doi:https://doi.org/10.1109/TPEL.2011.2169813.
- Patra, P., A. Patra, and N. Misra. 2012. A single-inductor multiple-output switcher with simultaneous buck, boost, and inverted outputs. IEEE Transactions on Power Electronics 27 (4):1936–51. doi:https://doi.org/10.1109/TPEL.2011.2169813.
- Ramu, S. K., G. C. Irudayaraj, and R. Elango. 2021. An IoT‐based smart monitoring scheme for solar PV applications. In Suman Lata Tripathi, Parvej Ahmad Alvi, Umashankar Subramaniam., Electrical and electronic devices, circuits, and materials, 211–33.
- Ravindranath, A., S. K. Mishra, and A. Joshi. 2013. Analysis and PWM control of switched boost inverter. IEEE Transactions on Industrial Electronics 60 (12):5593–602. doi:https://doi.org/10.1109/TIE.2012.2230595.
- Ray, O., A. P. Josyula, S. Mishra, and A. Joshi. 2015. Integrated dual-output converter. IEEE Transactions on Industrial Electronics 62 (1):371–82. doi:https://doi.org/10.1109/TIE.2014.2327599.
- Ray, O., and S. Mishra. 2017. Switched-boost action: A phenomenon for achieving time-division-multiplexed multi-port power transfer for nanogrid applications. Sādhanā 42 (8):1227–38. doi:https://doi.org/10.1007/s12046-017-0684-y.
- Sarasvathy, K., M. L. Luciana, and R. S. Kumar. 2017. Comparison of sine, hysteresis, SVPWM and predictive PWM techniques for shunt active power filter. 2017 IEEE International Conference on Electrical, Instrumentation and Communication Engineering (ICEICE). Karur, India.
- Saravanan, S., R. Senthil Kumar, A. Prakash, T. Chinnadurai, R. Tiwari, N. Prabaharan, and B. Chitti Babu. 2019. Photovoltaic array reconfiguration to extract maximum power under partially shaded conditions. In Distributed energy resources in microgrids, 215–41.
- Senthil Kumar, R., I. Gerald Christopher Raj, K. P. Suresh, P. Leninpugalhanthi, M. Suresh, H. Panchal, R. Meenakumari, and K. K. Sadasivuni. 2021. A method for broken bar fault diagnosis in three phase induction motor drive system using artificial neural networks. International Journal of Ambient Energy 1–7. doi:https://doi.org/10.1080/01430750.2021.1934117.
- Shamsi, P., and B. Fahimi. 2013. Dynamic behavior of multiport power electronic interface under source/load disturbances. IEEE Transactions on Industrial Electronics 60 (10):4500–11. doi:https://doi.org/10.1109/TIE.2012.2210376.
- Sharmila, B., K. Srinivasan, D. Devasena, M. Suresh, R. Hitesh Panchal, A. R. Meenakumari, K. K. Sadasivuni, and R. R. Shah. 2021. Modelling and performance analysis of electric vehicle. International Journal of Ambient Energy 1–7. doi:https://doi.org/10.1080/01430750.2021.1932587.
- Sheela, A., M. Suresh, V. Gowri Shankar, V. Hitesh Panchal, P. M. Atshaya, K. K. Sadasivuni, and S. Dharaskar. 2020. FEA based analysis and design of PMSM for electric vehicle applications using magnet software. International Journal of Ambient Energy 1–6. doi:https://doi.org/10.1080/01430750.2020.1762736.
- Song, S., G. Chen, Y. Liu, Y. Hu, K. Ni, and Y. Wang. 2020. A three-switch-based single-input dual-output converter with simultaneous boost & buck voltage conversion. IEEE Transactions on Industrial Informatics 16 (7):4468–77. doi:https://doi.org/10.1109/TII.2019.2944872.
- Subasri, R., R. Meenakumari, M. Hitesh Panchal, S. V. Priya, R. Ashokkumar, and K. K. Sadasivuni. 2020. Comparison of BPN, RBFN and wavelet neural network in induction motor modelling for speed estimation. International Journal of Ambient Energy 1–6. doi:https://doi.org/10.1080/01430750.2020.1817779.
- Suresh, K., C. Bharatiraja, N. Chellammal, M. Tariq, R. K. Chakrabortty, M. J. Ryan, and B. Alamri. 2021. A multifunctional non-isolated dual input-dual output converter for electric vehicle applications. IEEE Access 9:64445–60. doi:https://doi.org/10.1109/ACCESS.2021.3074581.
- Suresh, M., R. Meenakumari, V. P. Hitesh Panchal, E. S. E. Agouz, and M. Israr. 2020. An enhanced multiobjective particle swarm optimisation algorithm for optimum utilisation of hybrid renewable energy systems. International Journal of Ambient Energy 1–9. doi:https://doi.org/10.1080/01430750.2020.1737837.
- Wai, R.-J., and -J.-J. Liaw. 2015. High-efficiency-isolated single-input multiple-output bidirectional converter. IEEE Transactions on Power Electronics 30 (9):4914–30. doi:https://doi.org/10.1109/TPEL.2014.2364817.
- Wang, B., X. Zhang, J. Ye, and H. B. Gooi. 2019. Deadbeat control for a single-inductor multiple-input multiple-output DC–DC converter. IEEE Transactions on Power Electronics 34 (2):1914–24. doi:https://doi.org/10.1109/TPEL.2018.2832243.