References
- Abdelkader, T. K., Y. Zhang, E. S. Gaballah, S. Wang, Q. Wan, and Q. Fan. 2020. Energy and exergy analysis of a flat-plate solar air heater coated with carbon nanotubes and cupric oxide nanoparticles embedded in black paint. Journal of Cleaner Production 250:119501. doi:https://doi.org/10.1016/j.jclepro.2019.119501.
- Abi Mathew, A., and V. Thangavel. 2021. A novel thermal storage integrated evacuated tube heat pipe solar air heater: Energy, exergy, economic and environmental impact analysis. Solar Energy 220:828–42. doi:https://doi.org/10.1016/j.solener.2021.03.057.
- Abo-Elfadl, S., H. Hassan, and M. F. El-Dosoky. 2020. Study of the performance of double pass solar air heater of a new designed absorber: An experimental work. Solar Energy 198:479–89. doi:https://doi.org/10.1016/j.solener.2020.01.091.
- Abo-Elfadl, S., M. F. El-Dosoky, and H. Hassan. 2021a. Energy and exergy assessment of new designed solar air heater of V-shaped transverse finned absorber at single- and double-pass flow conditions. Environmental Science and Pollution Research 28:69074–92. doi:https://doi.org/10.1007/s11356-021-15163-z.
- Abo-Elfadl, S., M. S. Yousef, and H. Hassan. 2021b. Energy, exergy, and enviroeconomic assessment of double and single pass solar air heaters having a new design absorber. Process Safety and Environmental Protection 149:451–64. doi:https://doi.org/10.1016/j.psep.2020.11.020.
- Abuşka, M., and A. Kayapunar. 2021. Experimental and numerical investigation of thermal performance in solar air heater with conical surface. Heat and Mass Transfer 57:1791–806. doi:https://doi.org/10.1007/s00231-021-03054-5.
- Abuşka, M., S. Şevik, and A. Kayapunar. 2019. A comparative investigation of the effect of honeycomb core on the latent heat storage with PCM in solar air heater. Applied Thermal Engineering 148:684–93. doi:https://doi.org/10.1016/j.applthermaleng.2018.11.056.
- Abuşka, M., S. Şevik, and A. Kayapunar. 2020. Experimental performance analysis of sensible heat storage in solar air collector with cherry pits/powder under the natural convection. Solar Energy 200:2–9. doi:https://doi.org/10.1016/j.solener.2018.09.080.
- Acır, A., and İ. Ata. 2016. A study of heat transfer enhancement in a new solar air heater having circular type turbulators. Journal of the Energy Institute 89:606–16. doi:https://doi.org/10.1016/j.joei.2015.05.008.
- Acır, A., M. E. Canlı, İ. Ata, and R. Çakıroğlu. 2017. Parametric optimization of energy and exergy analyses of a novel solar air heater with grey relational analysis. Applied Thermal Engineering 122:330–38. doi:https://doi.org/10.1016/j.applthermaleng.2017.05.018.
- Afshari, F., A. Sözen, A. Khanlari, A. D. Tuncer, and C. Şirin. 2020. Effect of turbulator modifications on the thermal performance of cost-effective alternative solar air heater. Renewable Energy 158:297–310. doi:https://doi.org/10.1016/j.renene.2020.05.148.
- Akpinar, E. K., and F. Koçyiĝit. 2010. Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates. Applied Energy 87:3438–50. doi:https://doi.org/10.1016/j.apenergy.2010.05.017.
- Akpinar, E. K., and F. Koçyiǧit. 2010. Experimental investigation of thermal performance of solar air heater having different obstacles on absorber plates. International Communications in Heat and Mass Transfer 37:416–21. doi:https://doi.org/10.1016/j.icheatmasstransfer.2009.11.007.
- Al-Damook, M., Z. A. H. Obaid, M. Al Qubeissi, D. Dixon-Hardy, J. Cottom, and P. J. Heggs. 2019. CFD modeling and performance evaluation of multipass solar air heaters. Numerical Heat Transfer, Part A: Applications 76:438–64. doi:https://doi.org/10.1080/10407782.2019.1637228.
- Alic, E., M. Das, and E. K. Akpinar. 2021. Design, manufacturing, numerical analysis and environmental effects of single-pass forced convection solar air collector. Journal of Cleaner Production 311:127518. doi:https://doi.org/10.1016/j.jclepro.2021.127518.
- Arslan, E., and M. Aktaş. 2020. 4E analysis of infrared-convective dryer powered solar photovoltaic thermal collector. Solar Energy 208:46–57. doi:https://doi.org/10.1016/j.solener.2020.07.071.
- ASHRAE Standard. 2003. Methods of testing to determine the thermal performance of solar collectors. Atlanta, GA: American Society of Heating, Refrigerating and Air-conditioning Engineers Inc.
- Bayrak, F., H. F. Oztop, and A. Hepbasli. 2013. Energy and exergy analyses of porous baffles inserted solar air heaters for building applications. Energy and Buildings 57:338–45. doi:https://doi.org/10.1016/j.enbuild.2012.10.055.
- Benhamza, A., A. Boubekri, A. Atia, H. El Ferouali, T. Hadibi, M. Arıcı, and N. Abdenouri. 2021. Multi-objective design optimization of solar air heater for food drying based on energy, exergy and improvement potential. Renewable Energy 169:1190–209. doi:https://doi.org/10.1016/j.renene.2021.01.086.
- Benli, H. 2013. Determination of thermal performance calculation of two different types solar air collectors with the use of artificial neural networks. International Journal of Heat and Mass Transfer 60:1–7. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2012.12.042.
- Bezbaruah, P. J., R. S. Das, and B. K. Sarkar. 2021. Experimental and numerical analysis of solar air heater accoutered with modified conical vortex generators in a staggered fashion. Renewable Energy 180:109–31. doi:https://doi.org/10.1016/j.renene.2021.08.046.
- Biçer, A., A. G. Devecioğlu, V. Oruç, and Z. Tuncer. 2020. Experimental investigation of a solar air heater with copper wool on the absorber plate. International Journal of Green Energy 17:979–89. doi:https://doi.org/10.1080/15435075.2020.1818245.
- Das, B., J. D. Mondol, S. Debnath, A. Pugsley, M. Smyth, and A. Zacharopoulos. 2020. Effect of the absorber surface roughness on the performance of a solar air collector: An experimental investigation. Renewable Energy 152:567–78. doi:https://doi.org/10.1016/j.renene.2020.01.056.
- Das, M., E. Alic, and E. K. Akpinar. 2021. Detailed analysis of mass transfer in solar food dryer with different methods. International Communications in Heat and Mass Transfer 128:105600. doi:https://doi.org/10.1016/j.icheatmasstransfer.2021.105600.
- Daş, M., E. Alıç, and E. Kavak Akpinar. 2021. Numerical and experimental analysis of heat and mass transfer in the drying process of the solar drying system. Engineering Science and Technology, an International Journal 24:236–46. doi:https://doi.org/10.1016/j.jestch.2020.10.003.
- Das, M., and E. K. Akpinar. 2021. Investigation of the effects of solar tracking system on performance of the solar air dryer. Renewable Energy 167:907–16. doi:https://doi.org/10.1016/j.renene.2020.12.010.
- Devecioğlu, A. G., V. Oruc, and Z. Tuncer. 2018. Energy and exergy analyses of a solar air heater with wire mesh-covered absorber plate. International Journal of Exergy 26:3–20. doi:https://doi.org/10.1504/IJEX.2018.092500.
- Dinler, A. 2021. Reducing balancing cost of a wind power plant by deep learning in market data: A case study for Turkey. Applied Energy 289:116728. doi:https://doi.org/10.1016/j.apenergy.2021.116728.
- ElGamal, R., S. Kishk, S. Al-Rejaie, and G. ElMasry. 2021a. Incorporation of a solar tracking system for enhancing the performance of solar air heaters in drying apple slices. Renewable Energy 167:676–84. doi:https://doi.org/10.1016/j.renene.2020.11.137.
- ElGamal, R., S. Kishk, S. Al-Rejaie, and G. ElMasry. 2021b. Incorporation of a solar tracking system for enhancing the performance of solar air heaters in drying apple slices. Renewable Energy 167:676–84. doi:https://doi.org/10.1016/j.renene.2020.11.137.
- Esen, H. 2008. Experimental energy and exergy analysis of a double-flow solar air heater having different obstacles on absorber plates. Building and Environment 43:1046–54. doi:https://doi.org/10.1016/j.buildenv.2007.02.016.
- Fiuk, J. J., and K. Dutkowski. 2019. Experimental investigations on thermal efficiency of a prototype passive solar air collector with wavelike baffles. Solar Energy 188:495–506. doi:https://doi.org/10.1016/j.solener.2019.06.030.
- Fluent, A. 2013. ANSYS fluent theory guide 15.0. Canonsburg, PA: ANSYS.
- Ghritlahre, H. K., and M. Verma. 2021. Accurate prediction of exergetic efficiency of solar air heaters using various predicting methods. Journal of Cleaner Production 288:125115. doi:https://doi.org/10.1016/j.jclepro.2020.125115.
- Ghritlahre, H. K., P. Chandrakar, and A. Ahmad. 2020. Application of ANN model to predict the performance of solar air heater using relevant input parameters. Sustainable Energy Technologies and Assessments 40:100764. doi:https://doi.org/10.1016/j.seta.2020.100764.
- Hassan, H., and S. AboElfadl. 2021. Heat transfer and performance analysis of SAH having new transverse finned absorber of lateral gaps and central holes. Solar Energy 227:236–58. doi:https://doi.org/10.1016/j.solener.2021.08.061.
- Huang, M., Y. Wang, M. Li, V. Keovisar, X. Li, D. Kong, and Q. Yu. 2021. Comparative study on energy and exergy properties of solar photovoltaic/thermal air collector based on amorphous silicon cells. Applied Thermal Engineering 185:116376. doi:https://doi.org/10.1016/j.applthermaleng.2020.116376.
- Hürdoğan, E., K. N. Çerçi, D. B. Saydam, C. Ozalp, and E. Hürdoğan. 2021. Experimental and modeling study of peanut drying in a solar dryer with a novel type of a drying chamber. Energy sources, part a recover. Utilization Environmental Effects 00:1–24. doi:https://doi.org/10.1080/15567036.2021.1974126.
- Jamroen, C., C. Fongkerd, W. Krongpha, P. Komkum, A. Pirayawaraporn, and N. Chindakham. 2021. A novel UV sensor-based dual-axis solar tracking system: Implementation and performance analysis. Applied Energy 299. doi:https://doi.org/10.1016/j.apenergy.2021.117295.
- Khanlari, A., H. Ö. Güler, A. D. Tuncer, C. Şirin, Y. C. Bilge, Y. Yılmaz, and A. Güngör. 2020. Experimental and numerical study of the effect of integrating plus-shaped perforated baffles to solar air collector in drying application. Renewable Energy 145:1677–92. doi:https://doi.org/10.1016/j.renene.2019.07.076.
- Kılıçkap, S., E. El, and C. Yıldız. 2018. Investigation of the effect on the efficiency of phase change material placed in solar collector tank. Thermal Science and Engineering Progress 5:25–31. doi:https://doi.org/10.1016/j.tsep.2017.10.016.
- Kumar, A., and A. Layek. 2021. Energetic and exergetic based performance evaluation of solar air heater having winglet type roughneѕѕ on absorber surface. Solar Energy Materials and Solar Cells 230:111147. doi:https://doi.org/10.1016/j.solmat.2021.111147.
- Kumar, A., Singh, A.P., Akshayveer, Singh, and O.P., 2022. Performance characteristics of a new curved double-pass counter flow solar air heater. Energy 239 https://doi.org/https://doi.org/10.1016/j.energy.2021.121886.
- Kumar, D., P. Mahanta, and P. Kalita. 2021. Performance analysis of a solar air heater modified with zig-zag shaped copper tubes using energy-exergy methodology. Sustainable Energy Technologies and Assessments 46. doi:https://doi.org/10.1016/j.seta.2021.101222.
- Kumar, R., R. Kumar, S. Kumar, S. Thapa, M. Sethi, G. Fekete, and T. Singh. 2022b. Impact of artificial roughness variation on heat transfer and friction characteristics of solar air heating system. Alexandria Engineering Journal 61:481–91. doi:https://doi.org/10.1016/j.aej.2021.06.031.
- Kumar, S., and S. K. Verma. 2022 Heat transfer and fluid flow analysis of sinusoidal protrusion rib in solar air heater . International Journal of Thermal Sciences 172 PartB https://www.sciencedirect.com/science/article/pii/S1290072921004828?via%3Dihub doi:https://doi.org/https://doi.org/10.1016/j.ijthermalsci.2021.107323.
- Lu, X., and T. Wang. 2013. Investigation of radiation models in entrained-flow coal gasification simulation. International Journal of Heat and Mass Transfer 67:377–92. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2013.08.011.
- Maithani, R., S. Sharma, and A. Kumar. 2021. Thermo-hydraulic and exergy analysis of inclined impinging jets on absorber plate of solar air heater. Renewable Energy 179:84–95. doi:https://doi.org/10.1016/j.renene.2021.07.013.
- Majeed, M. H., N. T. Alwan, S. E. Shcheklein, and A. V. Matveev. 2021. Electromechanical solar tracker system for a parabolic dish with CPU water heater. Materials Today: Proceedings 42:2346–52. doi:https://doi.org/10.1016/j.matpr.2020.12.326.
- Menasria, F., M. Zedairia, and A. Moummi. 2017. Numerical study of thermohydraulic performance of solar air heater duct equipped with novel continuous rectangular baffles with high aspect ratio. Energy 133:593–608. doi:https://doi.org/10.1016/j.energy.2017.05.002.
- Michaelides, I. M., S. A. Kalogirou, I. Chrysis, G. Roditis, A. Hadjiyianni, H. D. Kambezidis, M. Petrakis, S. Lykoudis, and A. D. Adamopoulos. 1999. Comparison of performance and cost effectiveness of solar water heaters at different collector tracking modes in Cyprus and Greece. Energy Conversion and Management 40:1287–303. doi:https://doi.org/10.1016/S0196-8904(99)00020-5.
- Missana, W. P., E. Park, and T. T. Kivevele. 2020. Thermal performance analysis of solar dryer integrated with heat energy storage system and a low-cost parabolic solar dish concentrator for food preservation. Journal of Energy 2020:1–10. doi:https://doi.org/10.1155/2020/9205283.
- Munanga, P., S. Chinguwa, and W. R. Nyemba. 2020. Design for manufacture and assembly of an intelligent single axis solar tracking system. Procedia CIRP 91:571–76. doi:https://doi.org/10.1016/j.procir.2020.03.109.
- Neagoe, M., I. Visa, B. G. Burduhos, and M. D. Moldovan. 2014. Thermal load based adaptive tracking for flat plate solar collectors. Energy Procedia 48:1401–11. doi:https://doi.org/10.1016/j.egypro.2014.02.158.
- Pataknar, S. V., and D. B. Spalding. 1974 A calculation procedure for the transient and steady-state behavior of shell-and-tube heat exchangers . . Heat exchangers: design and theory sourcebook (New York: McGraw-Hill) 155–176.
- Potgieter, M. S. W., C. R. Bester, and M. Bhamjee. 2020. Experimental and CFD investigation of a hybrid solar air heater. Solar Energy 195:413–28. doi:https://doi.org/10.1016/j.solener.2019.11.058.
- Razak, A. A., Z. A. A. Majid, F. Basrawi, A. F. Sharol, M. H. Ruslan, and K. Sopian. 2019. A performance and technoeconomic study of different geometrical designs of compact single-pass cross-matrix solar air collector with square-tube absorbers. Solar Energy 178:314–30. doi:https://doi.org/10.1016/j.solener.2018.12.010.
- Roong, A. S. C., and S. H. Chong. 2016. Laboratory-scale single axis solar tracking system: Design and implementation. International Journal of Power Electronics and Drive Systems (IJPEDS) 7:254–64. doi:https://doi.org/10.11591/ijpeds.v7.i1.pp254-264.
- Sharma, A., M. A. Kallioğlu, A. Awasthi, R. Chauhan, G. Fekete, and T. Singh. 2021. Correlation formulation for optimum tilt angle for maximizing the solar radiation on solar collector in the Western Himalayan region. Case Studies in Thermal Engineering 26. doi:https://doi.org/10.1016/j.csite.2021.101185.
- Tuncer, A. D., A. Sözen, A. Khanlari, A. Amini, and C. Şirin. 2020a. Thermal performance analysis of a quadruple-pass solar air collector assisted pilot-scale greenhouse dryer. Solar Energy 203:304–16. doi:https://doi.org/10.1016/j.solener.2020.04.030.
- Tuncer, A. D., A. Sözen, A. Khanlari, A. Amini, and C. Şirin. 2020b. Thermal performance analysis of a quadruple-pass solar air collector assisted pilot-scale greenhouse dryer. Solar Energy 203:304–16. doi:https://doi.org/10.1016/j.solener.2020.04.030.
- Yadav, A. S., and J. L. Bhagoria. 2013. Heat transfer and fluid flow analysis of solar air heater: A review of CFD approach. Renewable and Sustainable Energy Reviews 23:60–79. doi:https://doi.org/10.1016/j.rser.2013.02.035.
- Yadav, A. S., V. Shrivastava, A. Sharma, and M. K. Dwivedi. 2021. Numerical simulation and CFD-based correlations for artificially roughened solar air heater. Materials Today: Proceedings 47:2685–93. doi:https://doi.org/10.1016/j.matpr.2021.02.759.
- Yıldız, A., B. Dandıl, and G. Çakmak. 2019. The effect on the efficiency of the photovoltaic panel used for the charging of mobile phones of the solar radiation in Elazig, Turkey. International Journal of Renewable Energy Technology 10:301. doi:https://doi.org/10.1504/ijret.2019.102855.