References
- Anxionnaz, Z., M. Cabassud, C. Gourdon, and P. Tochon. 2008. Heat exchanger/reactors (HEX reactors): Concepts, technologies: State-of-the-art. Chemical Engineering and Processing: Process Intensification 47:2029. doi:https://doi.org/10.1016/j.cep.2008.06.012.
- Ascanio, G., B. Castro, and E. Galindo. 2004. Measurement of power consumption in stirred vessels—A review. Chemical Engineering Research and Design 82:1282. doi:https://doi.org/10.1205/cerd.82.9.1282.44164.
- Basso, A., and S. Serban. 2019. Industrial applications of immobilized enzymes—A review. Molecular Catalysis 479:110607. doi:https://doi.org/10.1016/j.mcat.2019.110607.
- Bourne, J. R., P. Dell’Ava, O. Dossenbach, and T. Post. 1985. Densities, viscosities, and diffusivities in aqueous sodium hydroxide-potassium ferri- and ferro-cyanide solutions. Journal of Chemical & Engineering Data 30:160. doi:https://doi.org/10.1021/je00040a008.
- Broniarz-Press, L., and S. Rozanska. 2008. Determination of the flow and heat transfer characteristics in non-Newtonian media agitated using the electrochemical technique. International Journal of Heat and Mass Transfer 51:910. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2007.11.003.
- Cudak, M., and J. Karcz. 2008. Distribution of local heat transfer coefficient values in the wall region of an agitated vessel. Chemical Papers 62 (92). doi:https://doi.org/10.2478/s11696-007-0084-6.
- Cussler, E. L. 2009. Diffusion: Mass transfer in fluid systems. N.Y: Cambridge University Press.
- El‐Naggar, M. A., M. H. Abdel‐Aziz, A. A. Zatout, and G. H. Sedahmed. 2014. Liquid-solid mass transfer behavior of a stirred-tank reactor with a fixed bed at its bottom. Chemical Engineering & Technology 37 (9):1525. doi:https://doi.org/10.1002/ceat.201300689.
- Focke, W. W. 1983. On the mechanism of transfer enhancement by eddy promoters. Electrochimica Acta 28:1137. doi:https://doi.org/10.1016/0013-4686(83)80019-X.
- Fouad, Y. O., G. F. Malash, A. A. Zatout, and G. H. Sedahmed. 2013. Mass and heat transfer at an array of vertical tubes in a square stirred tank reactor. Chemical Engineering Research and Design 91:234. doi:https://doi.org/10.1016/j.cherd.2012.08.006.
- Gaber, M. M., Y. O. Fouad, H. A. Farag, and G. H. Sedahmed. 2015. Intensification of the rate of diffusion controlled electrolytic oxidation of FeSO4 by turbulence promoters in a stirred tank reactor in relation to wastewater treatment. Chemical Engineering Research and Design 97:100. doi:https://doi.org/10.1016/j.cherd.2015.03.018.
- Gargioni, G. T., P. S. B. Zdanski, and M. Vaz Jr. 2019. Heat transfer enhancement in flow past triangular turbulence promoters in closed channels. Numerical Heat Transfer, Part A: Applications 75:309. doi:https://doi.org/10.1080/10407782.2019.1582986.
- Gonzalez, J. C. M., and M. P. Nunez. 2018. Turbulence promoters for heat transfer enhancement. Progress Petrochemical Science 1:71. doi:https://doi.org/10.31031/PPS.2018.01.000514.
- Hines, A. L., and R. N. Maddox. 1985. Mass transfer: Fundamentals and applications. N.J: Prentice Hall Inc.
- Incropera, F. P., D. P. DeWitt, T. L. Bergman, and A. S. Lavine. 2007. Fundamentals of heat and mass transfer. N.J: John Wiley & Sons.
- Jossen, V., R. Eibl, R. Pörtner, M. Kraume, and D. Eibl. 2017. Stirred Bioreactors: Current state and developments, with special emphasis on biopharmaceutical production processes. In C. Larroche, M. Á. Sanromán, G. Du, and A. Pandey(eds)., Current developments in biotechnology and bioengineering. Amsterdam: Elsevier. pp. 179-215.
- Kresta, S. M., D. Mao, and V. Roussinova. 2006. Batch blend time in square stirred tanks. Chemical Engineering Science 61:2823. doi:https://doi.org/10.1016/j.ces.2005.10.069.
- Kumar, K. S., K. S. Kumar, R. Parthiban, R. Parthiban, and R. Parthiban. 2020. Review on surface modification of nanocarriers to overcome diffusion limitations: An enzyme immobilization aspect. Biochemical Engineering Journal 158:107574. doi:https://doi.org/10.1016/j.bej.2020.107574.
- Leng, D. E. 1991. Succeed at scale up. Chemical Engineering Progress 87:23.
- McCabe, W. L., J. C. Smith, and P. Harriott. 1993. Unit operations of chemical engineering. N.Y: McGraw-Hill Inc.
- Morshed, M. N., N. Behary, N. Bouazizi, G. Jinping, and V. A. Nierstrasz. 2021. An overview on biocatalysts immobilization on textiles: Preparation, progress and application in wastewater treatment. Chemosphere 279:130481. doi:https://doi.org/10.1016/j.chemosphere.2021.130481.
- Mowena, M. H., A. A. Zaatout, and G. H. Sedahmed. 2013. Liquid-solid mass transfer behavior of a new stirred-tank reactor with a packed bed fixed to its wall. Chemical Engineering & Technology 36:603. doi:https://doi.org/10.1002/ceat.201200049.
- Oldshue, J. Y. 1983. Fluid Mixing Technology. N.Y: McGraw‐Hill Inc.
- Oldshue, J. Y. 1989. Fluid mixing in 1989. Chemical Engineering Progress 85:33.
- Pickett, D. J. 1979. Electrochemical reactor design. Amsterdam: Elsevier.
- Ralph, T., M. Hitchman, J. Millington, and F. Walsh. 1996. Mass transport in an electrochemical laboratory filterpress reactor and its enhancement by turbulence promoters. Electrochimica Acta 41:591. doi:https://doi.org/10.1016/0013-4686(95)00346-0.
- Selman, J. R., and C. W. Tobias. 1978. Mass-transfer measurements by the limiting-current technique. Advances in Chemical Engineering 10:211. doi:https://doi.org/10.1016/S0065-2377(08)60134-9.
- Shewale, J., and S. Naik. 1991. Immobilized enzymes-applications. Journal of Scientific & Industrial Research 50:947.
- Shokry, F., M. Abd Elfattah, D. A. El-Gayar, H. A. Farag, and G. H. Sedahmed. 2020. Effect of drag reducing polymers and impeller geometry on the rate of mass and heat transfer at the wall of a cylindrical stirred tank reactor in relation to catalytic reactor design. Alexandria Engineering Journal 59:509. doi:https://doi.org/10.1016/j.aej.2020.01.025.
- Smith, J. M. 1981. Chemical engineering kinetics. N.Y: McGraw-Hill Inc.
- Smith, J. E. 2009. Biotechnology. Cambridge: Cambridge University Press.
- Thompson, M. P., I. Peñafiel, S. C. Cosgrove, and N. J. Turner. 2018. Biocatalysis using immobilized enzymes in continuous flow for the synthesis of fine chemicals. Organic Process Research & Development 23:9. doi:https://doi.org/10.1021/acs.oprd.8b00305.
- Troncoso, F. D., and G. M. Tonetto. 2022. Highly stable platinum monolith catalyst for the hydrogenation of vegetable oil. Chemical Engineering and Processing - Process Intensification 170:108669. doi:https://doi.org/10.1016/j.cep.2021.108669.
- Tschentscher, R., R. Spijkers, T. Nijhuis, J. Van Der Schaaf, and J. Schouten. 2010. Liquid−solid mass transfer in agitated slurry reactors and rotating solid foam reactors. Industrial & Engineering Chemistry Research 49:10758. doi:https://doi.org/10.1021/ie100385n.
- Vasiliadou, I., R. Molina, F. Martínez, and J. Melero. 2014. Experimental and modeling study on removal of pharmaceutically active compounds in rotating biological contactors. Journal of Hazardous Materials 274:473. doi:https://doi.org/10.1016/j.jhazmat.2014.04.034.
- Villermaux, J. 1988. The role of energy dissipation in contacting and mixing devices. Chemical Engineering & Technology - CET 11:276. doi:https://doi.org/10.1002/ceat.270110137.
- Volokitina, M. V., A. V. Nikitina, T. B. Tennikova, and E. G. Korzhikova‐Vlakh. 2017. Immobilized enzyme reactors based on monoliths: Effect of pore size and enzyme loading on biocatalytic process. Electrophoresis 38:2931. doi:https://doi.org/10.1002/elps.201700210.
- Walsh, F. C. 1993. A first course in electrochemical engineering. Romsey, UK: The Electrochemical Consultancy.
- Wang, T., J. Wang, and Y. Jin. 2007. Slurry reactors for gas-to-liquid processes: a review. Industrial & Engineering Chemistry Research 46:5824. doi:https://doi.org/10.1021/ie070330t.
- Xanthopoulos, C., and M. Stamatoudis. 1986. TURBULENT RANGE IMPELLER POWER NUMBERS IN CLOSED CYLINDRICAL AND SQUARE VESSELS. Chemical Engineering Communications 46:123. doi:https://doi.org/10.1080/00986448608911401.
- Yoshida, M., A. Ishita, K. Kinoshita, and H. Miyashita. 1997. Heat transfer enhancement with an inclined semicylindrical turbulence promoter?The relationship between optimum clearance and film thickness. Heat Transfer - Japanese Research 26:332. doi:https://doi.org/10.1002/(SICI)1520-6556(1997)26:5<332::AID-HTJ5>3.0.CO;2-X.
- Zewail, T. M., A. A. Zatout, Y. A. El‐Taweel, and G. H. Sedahmed. 2010. Liquid-solid mass transfer behavior of a vertical array of closely spaced horizontal tubes in relation to catalytic and electrochemical reactor design. Chemical Engineering & Technology 33:121. doi:https://doi.org/10.1002/ceat.200900311.