References
- Ahmed, W. H., M. A. El-Nakla, and B. I. Ismail. 2010. Towards understanding the critical heat flux for industrial applications. International Journal of Multiphase Flow 36 (3):153–65. doi:https://doi.org/10.1016/j.ijmultiphaseflow.2009.10.002.
- Aksan, N. 2019. An overview on thermal-hydraulic phenomena for water cooled nuclear reactors; part I: SETs, and ITFs of PWRs, BWRs, VVERs. Nuclear Engineering and Design 354:110212. doi:https://doi.org/10.1016/j.nucengdes.2019.110212.
- Azmi, W. H., K. A. Hamid, N. A. Usri, R. Mamat, and K. V. Sharma. 2016. Heat transfer augmentation of ethylene glycol: Water nanofluids and applications — A review. International Communications in Heat and Mass Transfer 75:13–23. doi:https://doi.org/10.1016/j.icheatmasstransfer.2016.03.018.
- Bafrani, H. A., O. Noori-kalkhoran, M. Gei, R. Ahangari, and M. M. Mirzaee. 2020. On the use of boundary conditions and thermophysical properties of nanoparticles for application of nanofluids as coolant in nuclear power plants; a numerical study. Progress in Nuclear Energy 126:103417. doi:https://doi.org/10.1016/j.pnucene.2020.103417.
- Bang, I. C., and G. Heo. 2009. An axiomatic design approach in development of nanofluid coolants. Applied Thermal Engineering 29 (1):75–90. doi:https://doi.org/10.1016/j.applthermaleng.2008.02.004.
- Banisharif, A., P. Estell, A. Rashidi, S. Van Vaerenbergh, and M. Aghajani. 2021. Heat transfer properties of metal, metal oxides, and carbon water-based nanofluids in the ethanol condensation process. Colloids and Surfaces A: Physicochemical and Engineering Aspects 622:126720. doi:https://doi.org/10.1016/j.colsurfa.2021.126720.
- Choi, S. U. S. 1998. Nanofluid technology: Current status and future research. Office of Scientific & Technical Information Technical Reports 12 (10):2608–22.
- Choi, S. U. S., and J. A. Eastman. 1995. Enhancing thermal conductivity of fluids with nanoparticles. Asme Fed 231 (1):99–105.
- Chunzhi, Z. 2005. 《General Chemical Analysis Methods Manual》. SHANDONG CHEMICAL INDUSTRY 34(1):1.
- Ding, M., X. Zhou, H. Zhang, H. Bian, and Q. Yan. 2021. A review of the development of nuclear fuel performance analysis and codes for PWRs. Annals of Nuclear Energy 163:108542. doi:https://doi.org/10.1016/j.anucene.2021.108542.
- Erixno, O., N. A. Rahim, F. Ramadhani, and N. N. Adzman. 2022. Energy management of renewable energy-based combined heat and power systems: A review. Sustainable Energy Technologies and Assessments 51:101944. doi:https://doi.org/10.1016/j.seta.2021.101944.
- Hadad, K., A. Rahimian, and M. R. Nematollahi. 2013. Numerical study of single and two-phase models of water/Al2O3 nanofluid turbulent forced convection flow in VVER-1000 nuclear reactor. Annals of Nuclear Energy 60:287–94. doi:https://doi.org/10.1016/j.anucene.2013.05.017.
- Heris, S. Z., S. G. Etemad, and M. N. Esfahany. 2006. Experimental investigation of oxide nanofluids laminar flow convective heat transfer ☆. International Communications in Heat & Mass Transfer 33 (4):529–35. doi:https://doi.org/10.1016/j.icheatmasstransfer.2006.01.005.
- Hwang, Y., J. K. Lee, J. K. Lee, Y. M. Jeong, S. I. Cheong, Y. C. Ahn, and S. H. Kim. 2008. Production and dispersion stability of nanoparticles in nanofluids. Powder Technology 186 (2):145–53. doi:https://doi.org/10.1016/j.powtec.2007.11.020.
- Jin, C., Q. Wu, G. Yang, H. Zhang, and Y. Zhong. 2021. Investigation on hybrid nanofluids based on carbon nanotubes filled with metal nanoparticles: Stability, thermal conductivity, and viscosity. Powder Technology 389:1–10. doi:https://doi.org/10.1016/j.powtec.2021.05.007.
- Li, Y., Q. Lin, H. Li, J. Cao, and S. Xi. 2009. A review on development of nanofluid preparation and characterization. Powder Technology 196 (2):89–101. doi:https://doi.org/10.1016/j.powtec.2009.07.025.
- Loong, T. T., H. Salleh, A. Khalid, and H. Koten. 2021. Thermal performance evaluation for different type of metal oxide water based nanofluids. Case Studies in Thermal Engineering 27:101288. doi:https://doi.org/10.1016/j.csite.2021.101288.
- Lowe, R. J., and P. Drummond. 2022. Solar, wind and logistic substitution in global energy supply to 2050 – Barriers and implications. Renewable and Sustainable Energy Reviews 153:111720. doi:https://doi.org/10.1016/j.rser.2021.111720.
- Mathew, M. D. 2022. Nuclear energy: A pathway towards mitigation of global warming. Progress in Nuclear Energy 143:104080. doi:https://doi.org/10.1016/j.pnucene.2021.104080.
- Moghaieb, H. S., H. M. Abdel-Hamid, M. H. Shedid, and A. B. Helali. 2017. Engine cooling using Al2O3/water nanofluids. Applied Thermal Engineering 115:152–59. doi:https://doi.org/10.1016/j.applthermaleng.2016.12.099.
- Prăvălie, R., and G. Bandoc. 2018. Nuclear energy: Between global electricity demand, worldwide decarbonisation imperativeness, and planetary environmental implications. Journal of Environmental Management 209:81–92. doi:https://doi.org/10.1016/j.jenvman.2017.12.043.
- Rahnama, Z., and G. R. Ansarifar. 2021. Nanofluid application for heat transfer, safety, and natural circulation enhancement in the NuScale nuclear reactor as a small modular reactor using computational fluid dynamic (CFD) modeling via neutronic and thermal-hydraulics coupling. Progress in Nuclear Energy 138:103796. doi:https://doi.org/10.1016/j.pnucene.2021.103796.
- Safarzadeh, O., A. S. Shirani, A. Minuchehr, and F. Saadatian-derakhshandeh. 2014. Coupled neutronic/thermo-hydraulic analysis of water/Al2O3 nanofluids in a VVER-1000 reactor. Annals of Nuclear Energy 65:72–77.
- Said, Z., R. Saidur, and N. A. Rahim. 2014. Optical properties of metal oxides based nanofluids. International Communications in Heat and Mass Transfer 59:46–54. doi:https://doi.org/10.1016/j.icheatmasstransfer.2014.10.010.
- Said, Z., L. S. Sundar, A. K. Tiwari, H. M. Ali, M. Sheikholeslami, E. Bellos, and H. Babar, Recent advances on the fundamental physical phenomena behind stability, dynamic motion, thermophysical properties, heat transport, applications, and challenges of nanofluids. Physics Reports 2021.
- Sofiah, A. G. N., M. Samykano, A. K. Pandey, K. Kadirgama, K. Sharma, and R. Saidur. 2021. Immense impact from small particles: Review on stability and thermophysical properties of nanofluids. Sustainable Energy Technologies and Assessments 48:101635.
- Suganthi, K. S., and K. S. Rajan. 2017. Metal oxide nanofluids: Review of formulation, thermo-physical properties, mechanisms, and heat transfer performance. Renewable and Sustainable Energy Reviews 76:226–55.
- Tiwari, A. K., V. Kumar, Z. Said, and H. K. Paliwal. 2021. A review on the application of hybrid nanofluids for parabolic trough collector: Recent progress and outlook. Journal of Cleaner Production 292:126031.
- U-liang, J. I. J., Y. A. G. X. Iao-hua, and W. E. I. Y. I-ming. 2005. System Evaluation Method Based on Fuzzy Preferential Relation Matrix. SYSTEM SENGINEERING-THEORY METHODOLOGY APPLICATIONS 14 (4):364–68.
- Wen, D., and Y. Ding. 2004. Experimental investigation into convective heat transfer of nanofluids at the entrance region under laminar flow conditions. International Journal of Heat & Mass Transfer 47 (24):5181–88. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2004.07.012.
- Wu, J. M., and J. Zhao. 2013. A review of nanofluid heat transfer and critical heat flux enhancement—Research gap to engineering application. Progress in Nuclear Energy 66 (5):13–24. doi:https://doi.org/10.1016/j.pnucene.2013.03.009.
- Zeinali, H. S., E. M. Nasr, and E. S. Gh. 2007. Experimental investigation of convective heat transfer of AlO/water nanofluid in circular tube. International Journal of Heat & Fluid Flow 31 (4):606–12.