References
- Akton psychrometry property data, AKTON Psychrometrics Professional Edition 7.9.4. 2020, http://www.aktonassoc.com/ 05/12/2021.
- Alkaya, E., and G. N. Demirer. 2014. Sustainable textile production : A case study from a woven fabric manufacturing mill in Turkey. Journal of Cleaner Production 65:595–603. doi:https://doi.org/10.1016/j.jclepro.2013.07.008.
- Cay, A., A. Hepbasli, and A. Hepbasli. 2010a. Exergetic analysis of textile convective drying with stenters by subsystem models : part 1 — exergetic modeling and evaluation. Drying Technology 28 (12):1359–67. doi:https://doi.org/10.1080/07373937.2010.482695.
- Cay, A., A. Hepbasli, and A. Hepbasli. 2010b. Exergetic analysis of textile convective drying with stenters by subsystem models : part 2 — parametric study on exergy analysis. Drying Technology 3937 (28):1368–76. doi:https://doi.org/10.1080/07373937.2010.482696.
- Cay, A., and I. Tarakçıoğlu. 2009. A study on the exergetic analysis of continuous textile dryers. International Journal of Exergy 6 (3):422–39. doi:https://doi.org/10.1504/IJEX.2009.025348.
- Cay, A., I. Tarakçıoǧlu, and A. Hepbasli. 2007. Exergetic performance assessment of a stenter system in a textile finishing mill. International Journal of Energy Research 31 (13):135–47. doi:https://doi.org/10.1002/er.
- Chen, X., J. Li, H. Liu, Y. Yin, and Y. Zhang. 2016. Energy system diagnosis of paper-drying process, part 2: A model-based estimation of energy-saving potentials. Drying Technology 34 (10):1219–30. doi:https://doi.org/10.1080/07373937.2015.1095206.
- European Commission Integrated Pollution Prevention and Control (IPPC). 2003. Reference document on best available techniques for the textile industry. The European Commission. https://eippcb.jrc.ec.europa.eu/sites/default/files/2020-03/superseded_lvoC_bref_0203.pdf, Visited 10/10/2021.
- Fiaschi, D., G. Manfrida, L. Russo, and L. Talluri. 2017. Improvement of waste heat recuperation on an industrial textile dryer: redesign of heat exchangers network and components. Energy Conversion and Management 150:924–40. doi:https://doi.org/10.1016/j.enconman.2017.05.053.
- Gelir, B. C. I. N. A. R., and H. C. 2019. The effect of the heat recovery on fuel consumption in the stenter machine. Thermal Science 25. doi:https://doi.org/10.2298/TSCI190510336C.
- Hasanbeigi, A. Energy-efficiency improvement opportunities for the textile industry; 2010.
- Hasanbeigi, A., and L. Price. 2012. A review of energy use and energy efficiency technologies for the textile industry. Renewable and Sustainable Energy Reviews 16 (6):3648–65. doi:https://doi.org/10.1016/j.rser.2012.03.029.
- Hong, G., T. Su, J. Lee, T. Hsu, and H. Chen. 2012. Energy conservation potential in Taiwanese textile industry. Energy Policy 38 (2010):7048–53. doi:https://doi.org/10.1016/j.enpol.2010.07.024.
- Iftekharul, M., R. Saidur, E. Niza, and A. Muhammad. 2017. Waste-heat utilization - the sustainable technologies to minimize energy consumption in Bangladesh textile sector. Journal of Cleaner Production 142:1867–76. doi:https://doi.org/10.1016/j.jclepro.2016.11.098.
- Kavak, H., C. Timuralp, and N. Doner. 2020. A comparative study of waste energy recovery from a hot-oil central boiler in a textile finishing factory.Energy Sources, Part A: Recovery, Utilization, and Environmental Effects Published(online) 1–12. doi:https://doi.org/10.1080/15567036.2020.1738595.
- Khude, P. 2017. A review on energy management in textile industry. Innovative Energy & Research 6 (2):1–5. doi:https://doi.org/10.4172/2576-1463.1000169.
- Kline, M. 1953. Describing uncertainties in single sample. Mechanical Engineering 75:3–8.
- Martín, E., I. Viéitez, and F. Varas. 2021. A predictive model for the industrial air-impingement drying of resin impregnated paper. Applied Thermal Engineering 199:117602. doi:https://doi.org/10.1016/j.applthermaleng.2021.117602.
- Ozturk, H. K. 2005. Energy usage and cost in textile industry : A case study for Turkey. Energy 30 (13):2424–46. doi:https://doi.org/10.1016/j.energy.2004.11.014.
- Patel, S. K., and M. H. Bade. 2019. Energy analysis and heat recovery opportunities in spray dryers applied for effluent management. Energy Conversion and Management 186:597–609. doi:https://doi.org/10.1016/j.enconman.2019.02.065.
- Patel, S. K., and M. H. Bade. 2021. Parametric analysis of industrial spray dryer for performance enhancement applicable in effluent management. Drying Technology 1–24. doi:https://doi.org/10.1080/07373937.2021.1975291.
- Patel, N. G., D. J. Shendage, M. G. Parikh, K. Surajit, and M. H. Bade. 2021. Energy model-based benchmarking of the drying process in the stenter machine. Drying Technology 39 (8):1114–33. doi:https://doi.org/10.1080/07373937.2021.1907401.
- Santos, R. M., J. W. P. Llanos, M. B. Quadri, and I. C. C. da Rocha. 2015. Study of drying and consumption of natural gas in a textile stenter of direct heating. Drying Technology 33 (1):37–54. doi:https://doi.org/10.1080/07373937.2014.932286.
- Sardeshpande, V., U. N. Gaitonde, and R. Banerjee. 2007. Model based energy benchmarking for glass furnace. Energy Conversion and Management 48 (10):2718–38. doi:https://doi.org/10.1016/j.enconman.2007.04.013.
- Şekkeli, M., and F. Keçecioğlu. 2012. Scada based an energy saving approach to operation of stenter machine in a textile plant using waste heat recovery system. Tekstil Ve Konfeksiyon 22(3): 248–57.
- Zogla, L., G. Zogla, A. Beloborodko, and M. Rosa. 2015. Process benchmark for evaluation energy performance in breweries. Energy Procedia 72:202–08. doi:https://doi.org/10.1016/j.egypro.2015.06.029.